SSAB Form Tube 220

Download data sheet

Select Language

Get datasheet by email

Company E-mail address

Country

Läs SSABs integritetspolicy för mer information om hur vi behandlar personuppgifter

På denna sida

General Product Description

SSAB Form Tube 220 is formable precision tube. It has over 20% higher elongation values and very narrow tolerances compared to competing products. Available in circular, rectangular, square and special shapes, it comes with different coating and surface options including cold rolled, galvanized, galvannealed and galfan. Customized shapes and other tailoring options are available upon request. Typically uses include light engineering, where formability, uniform quality, different surface options and usability are important.

Dimension Range

SSAB Form Tube 220 is available in circular, square, rectangular, flat oval and oval (elliptic) shapes.

Hide/Show specific columns Edit

Select columns to display

Shapes	Dimensions
Circular (mmin)	16 - 88.90.63 - 3.50
Square (mmin)	19x19 - 70x70
Rectangular (mmin)	25x15 - 100x40
Flat oval (mm)	25x15 - 78x38
Oval, elliptic (mm)	22x16.5 - 31x17.5
Wall thickness (mmin)	0.9 - 3.00.04 - 0.12
Mill length (mm)	6000

Compare parameters

Select one parameter to compare

Dimensions

Shapes

Circular (mmin)

Dimensions

16 - 88.90.63 - 3.50

Shapes

Square (mmin)

Dimensions

19x19 - 70x70

Shapes

Rectangular (mmin)

Dimensions

25x15 - 100x40

Shapes

Flat oval (mm)

Dimensions

25x15 - 78x38

Shapes

Oval, elliptic (mm)

Dimensions

22x16.5 - 31x17.5

Shapes

Wall thickness (mmin)

Dimensions

0.9 - 3.00.04 - 0.12

Shapes

Mill length (mm)

Dimensions

6000

Other shapes, sizes and lengths are available upon request.

Circular Dimensions

Hide/Show specific columns Edit

Select columns to display

Outer diameter (mmin)	0.9 mm (kg/m)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
160.63	0.335	0.370	0.455	0.536	0.691 ¹⁾	—	—
180.71	0.380	0.419	0.516	0.610	0.789	—	—
190.75	0.402	0.444	0.547	0.647	0.838	—	—
200.79	0.424	0.469	0.578	0.684	0.888	—	—
220.87	0.468	0.518	0.640	0.758	0.986	1.20	1.41 ¹⁾
250.98	0.535	0.592	0.732	0.869	1.13	1.39	1.63 ¹⁾
281.1	0.601	0.666	0.825	0.980	1.28	1.57	1.85
301.2	0.646	0.715	0.886	1.05	1.38	1.70	2.00
321.3	—	0.765	0.948	1.13	1.48	1.82	2.15
351.4	—	0.838	1.04	1.24	1.63	2.00	2.37
381.5	—	0.912	1.13	1.35	1.78	2.19	2.59
401.6	—	0.962	1.20	1.42	1.87	2.31	2.74
411.6	—	0.990	1.22	1.46	1.92	2.37	2.81
41.51.63	—	0.999	1.24	1.48	1.95	2.40	2.85
44.51.75	—	1.07	1.33	1.59	2.10	2.59	3.07
481.9	—	—	1.44	1.72	2.27	2.81	3.33
502.0	—	—	1.50	1.79	2.37	2.93	3.48
50.82.00	—	—	1.53	1.82	2.41	2.98	3.54
552.2	—	—	1.66	1.98	2.61	3.24	3.85
572.2	—	—	1.72	2.05	2.71	3.36	4.00
602.4	—	—	1.81	2.16	2.86	3.55	4.22
702.8	—	—	—	2.53	3.35	4.16	4.96
76.13.00	—	—	—	2.76	3.65	4.54	5.41
88.93.50	—	—	—	—	4.29	5.33	6.36

Compare parameters

Select one parameter to compare

0.9 mm (kg/m)

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Outer diameter (mmin)

160.63

0.9 mm (kg/m)

0.335

1.0 mm (kg/m)

0.370

1.25 mm (kg/m)

0.455

1.5 mm (kg/m)

0.536

2.0 mm (kg/m)

0.691 ¹⁾

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

180.71

0.9 mm (kg/m)

0.380

1.0 mm (kg/m)

0.419

1.25 mm (kg/m)

0.516

1.5 mm (kg/m)

0.610

2.0 mm (kg/m)

0.789

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

190.75

0.9 mm (kg/m)

0.402

1.0 mm (kg/m)

0.444

1.25 mm (kg/m)

0.547

1.5 mm (kg/m)

0.647

2.0 mm (kg/m)

0.838

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

200.79

0.9 mm (kg/m)

0.424

1.0 mm (kg/m)

0.469

1.25 mm (kg/m)

0.578

1.5 mm (kg/m)

0.684

2.0 mm (kg/m)

0.888

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Outer diameter (mmin)

220.87

0.9 mm (kg/m)

0.468

1.0 mm (kg/m)

0.518

1.25 mm (kg/m)

0.640

1.5 mm (kg/m)

0.758

2.0 mm (kg/m)

0.986

2.5 mm (kg/m)

1.20

3.0 mm (kg/m)

1.41 ¹⁾

Expand Collapse

Outer diameter (mmin)

250.98

0.9 mm (kg/m)

0.535

1.0 mm (kg/m)

0.592

1.25 mm (kg/m)

0.732

1.5 mm (kg/m)

0.869

2.0 mm (kg/m)

1.13

2.5 mm (kg/m)

1.39

3.0 mm (kg/m)

1.63 ¹⁾

Expand Collapse

Outer diameter (mmin)

281.1

0.9 mm (kg/m)

0.601

1.0 mm (kg/m)

0.666

1.25 mm (kg/m)

0.825

1.5 mm (kg/m)

0.980

2.0 mm (kg/m)

1.28

2.5 mm (kg/m)

1.57

3.0 mm (kg/m)

1.85

Expand Collapse

Outer diameter (mmin)

301.2

0.9 mm (kg/m)

0.646

1.0 mm (kg/m)

0.715

1.25 mm (kg/m)

0.886

1.5 mm (kg/m)

1.05

2.0 mm (kg/m)

1.38

2.5 mm (kg/m)

1.70

3.0 mm (kg/m)

2.00

Expand Collapse

Outer diameter (mmin)

321.3

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.765

1.25 mm (kg/m)

0.948

1.5 mm (kg/m)

1.13

2.0 mm (kg/m)

1.48

2.5 mm (kg/m)

1.82

3.0 mm (kg/m)

2.15

Expand Collapse

Outer diameter (mmin)

351.4

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.838

1.25 mm (kg/m)

1.04

1.5 mm (kg/m)

1.24

2.0 mm (kg/m)

1.63

2.5 mm (kg/m)

2.00

3.0 mm (kg/m)

2.37

Expand Collapse

Outer diameter (mmin)

381.5

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.912

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.35

2.0 mm (kg/m)

1.78

2.5 mm (kg/m)

2.19

3.0 mm (kg/m)

2.59

Expand Collapse

Outer diameter (mmin)

401.6

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.962

1.25 mm (kg/m)

1.20

1.5 mm (kg/m)

1.42

2.0 mm (kg/m)

1.87

2.5 mm (kg/m)

2.31

3.0 mm (kg/m)

2.74

Expand Collapse

Outer diameter (mmin)

411.6

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.990

1.25 mm (kg/m)

1.22

1.5 mm (kg/m)

1.46

2.0 mm (kg/m)

1.92

2.5 mm (kg/m)

2.37

3.0 mm (kg/m)

2.81

Expand Collapse

Outer diameter (mmin)

41.51.63

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.999

1.25 mm (kg/m)

1.24

1.5 mm (kg/m)

1.48

2.0 mm (kg/m)

1.95

2.5 mm (kg/m)

2.40

3.0 mm (kg/m)

2.85

Expand Collapse

Outer diameter (mmin)

44.51.75

0.9 mm (kg/m)

—

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.33

1.5 mm (kg/m)

1.59

2.0 mm (kg/m)

2.10

2.5 mm (kg/m)

2.59

3.0 mm (kg/m)

3.07

Expand Collapse

Outer diameter (mmin)

481.9

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.44

1.5 mm (kg/m)

1.72

2.0 mm (kg/m)

2.27

2.5 mm (kg/m)

2.81

3.0 mm (kg/m)

3.33

Expand Collapse

Outer diameter (mmin)

502.0

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.50

1.5 mm (kg/m)

1.79

2.0 mm (kg/m)

2.37

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.48

Expand Collapse

Outer diameter (mmin)

50.82.00

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.53

1.5 mm (kg/m)

1.82

2.0 mm (kg/m)

2.41

2.5 mm (kg/m)

2.98

3.0 mm (kg/m)

3.54

Expand Collapse

Outer diameter (mmin)

552.2

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.66

1.5 mm (kg/m)

1.98

2.0 mm (kg/m)

2.61

2.5 mm (kg/m)

3.24

3.0 mm (kg/m)

3.85

Expand Collapse

Outer diameter (mmin)

572.2

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.72

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.71

2.5 mm (kg/m)

3.36

3.0 mm (kg/m)

4.00

Expand Collapse

Outer diameter (mmin)

602.4

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.81

1.5 mm (kg/m)

2.16

2.0 mm (kg/m)

2.86

2.5 mm (kg/m)

3.55

3.0 mm (kg/m)

4.22

Expand Collapse

Outer diameter (mmin)

702.8

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.53

2.0 mm (kg/m)

3.35

2.5 mm (kg/m)

4.16

3.0 mm (kg/m)

4.96

Expand Collapse

Outer diameter (mmin)

76.13.00

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.76

2.0 mm (kg/m)

3.65

2.5 mm (kg/m)

4.54

3.0 mm (kg/m)

5.41

Expand Collapse

Outer diameter (mmin)

88.93.50

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.29

2.5 mm (kg/m)

5.33

3.0 mm (kg/m)

6.36

Expand Collapse

¹⁾ Elongation A-value according to +CR2, 23%.

Square Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
19 x 19	0.564	0.694	0.820	1.06 ¹⁾	—	—
20 x 20	0.595	0.733	0.868	1.12 ¹⁾	—	—
25 x 25	0.752	0.930	1.10	1.44	1.76	—
30 x 30	0.909	1.13	1.34	1.75	2.15	2.39
32 x 32	0.972	1.20	1.43	1.88	2.31	2.58
35 x 35	1.07	1.32	1.57	2.07	2.54	2.86
40 x 40	—	1.52	1.81	2.38	2.93	3.33
50 x 50	—	1.91	2.28	3.01	3.72	4.28
60 x 60	—	—	2.75	3.64	4.50	5.22
70 x 70	—	—	—	4.26	5.29	6.16

Compare parameters

Select one parameter to compare

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Height x Width (mm)

19 x 19

1.0 mm (kg/m)

0.564

1.25 mm (kg/m)

0.694

1.5 mm (kg/m)

0.820

2.0 mm (kg/m)

1.06 ¹⁾

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

20 x 20

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12 ¹⁾

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

25 x 25

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

1.76

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 30

1.0 mm (kg/m)

0.909

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.34

2.0 mm (kg/m)

1.75

2.5 mm (kg/m)

2.15

3.0 mm (kg/m)

2.39

Expand Collapse

Height x Width (mm)

32 x 32

1.0 mm (kg/m)

0.972

1.25 mm (kg/m)

1.20

1.5 mm (kg/m)

1.43

2.0 mm (kg/m)

1.88

2.5 mm (kg/m)

2.31

3.0 mm (kg/m)

2.58

Expand Collapse

Height x Width (mm)

35 x 35

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

2.86

Expand Collapse

Height x Width (mm)

40 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

50 x 50

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.91

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

60 x 60

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Height x Width (mm)

70 x 70

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.26

2.5 mm (kg/m)

5.29

3.0 mm (kg/m)

6.16

Expand Collapse

¹⁾ Elongation A-value according to +CR2, 23%.

Rectangular Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
25 x 15	0.595	0.733	0.868	1.12 ¹⁾	—	—
30 x 10	0.595	0.733	0.868	1.12	—	—
30 x 15	0.673	0.831	0.985	1.28	—	—
30 x 20	0.752	0.930	1.10	1.44	1.76	—
30 x 25	0.830	1.03	1.22	1.59	1.95	—
35 x 15	0.752	0.930	1.10	1.44	1.76	—
35 x 20	0.830	1.03	1.22	1.59	1.95	2.16
40 x 20	0.909	1.13	1.34	1.75	2.15	2.39
40 x 25	0.987	1.22	1.46	1.91	2.34	2.63
40 x 30	1.07	1.32	1.57	2.07	2.54	2.86
50 x 20	1.07	1.32	1.57	2.07	2.54	2.86
50 x 25	—	1.42	1.69	2.22	2.74	3.10
50 x 30	—	1.52	1.81	2.38	2.93	3.33
50 x 40	—	1.71	2.05	2.69	3.33	3.80
60 x 20	—	1.52	1.81	2.38	2.93	3.33
60 x 30	—	1.71	2.05	2.69	3.33	3.80
60 x 40	—	1.91	2.28	3.01	3.72	4.28
70 x 25	—	—	2.16	2.85	3.52	4.04
70 x 30	—	—	2.28	3.01	3.72	4.28
70 x 50	—	—	2.75	3.64	4.50	5.22
80 x 20	—	—	2.28	3.01	3.72	4.28
80 x 30	—	—	2.52	3.32	4.11	4.74
80 x 40	—	—	2.75	3.64	4.50	5.22
80 x 60	—	—	—	4.26	5.29	6.16
100 x 40	—	—	—	4.26	5.29	6.16

Compare parameters

Select one parameter to compare

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Height x Width (mm)

25 x 15

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12 ¹⁾

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 10

1.0 mm (kg/m)

0.595

1.25 mm (kg/m)

0.733

1.5 mm (kg/m)

0.868

2.0 mm (kg/m)

1.12

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 15

1.0 mm (kg/m)

0.673

1.25 mm (kg/m)

0.831

1.5 mm (kg/m)

0.985

2.0 mm (kg/m)

1.28

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 20

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

1.76

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 25

1.0 mm (kg/m)

0.830

1.25 mm (kg/m)

1.03

1.5 mm (kg/m)

1.22

2.0 mm (kg/m)

1.59

2.5 mm (kg/m)

1.95

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

35 x 15

1.0 mm (kg/m)

0.752

1.25 mm (kg/m)

0.930

1.5 mm (kg/m)

1.10

2.0 mm (kg/m)

1.44

2.5 mm (kg/m)

1.76

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

35 x 20

1.0 mm (kg/m)

0.830

1.25 mm (kg/m)

1.03

1.5 mm (kg/m)

1.22

2.0 mm (kg/m)

1.59

2.5 mm (kg/m)

1.95

3.0 mm (kg/m)

2.16

Expand Collapse

Height x Width (mm)

40 x 20

1.0 mm (kg/m)

0.909

1.25 mm (kg/m)

1.13

1.5 mm (kg/m)

1.34

2.0 mm (kg/m)

1.75

2.5 mm (kg/m)

2.15

3.0 mm (kg/m)

2.39

Expand Collapse

Height x Width (mm)

40 x 25

1.0 mm (kg/m)

0.987

1.25 mm (kg/m)

1.22

1.5 mm (kg/m)

1.46

2.0 mm (kg/m)

1.91

2.5 mm (kg/m)

2.34

3.0 mm (kg/m)

2.63

Expand Collapse

Height x Width (mm)

40 x 30

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

2.86

Expand Collapse

Height x Width (mm)

50 x 20

1.0 mm (kg/m)

1.07

1.25 mm (kg/m)

1.32

1.5 mm (kg/m)

1.57

2.0 mm (kg/m)

2.07

2.5 mm (kg/m)

2.54

3.0 mm (kg/m)

2.86

Expand Collapse

Height x Width (mm)

50 x 25

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.42

1.5 mm (kg/m)

1.69

2.0 mm (kg/m)

2.22

2.5 mm (kg/m)

2.74

3.0 mm (kg/m)

3.10

Expand Collapse

Height x Width (mm)

50 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

50 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.71

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.69

2.5 mm (kg/m)

3.33

3.0 mm (kg/m)

3.80

Expand Collapse

Height x Width (mm)

60 x 20

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.52

1.5 mm (kg/m)

1.81

2.0 mm (kg/m)

2.38

2.5 mm (kg/m)

2.93

3.0 mm (kg/m)

3.33

Expand Collapse

Height x Width (mm)

60 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.71

1.5 mm (kg/m)

2.05

2.0 mm (kg/m)

2.69

2.5 mm (kg/m)

3.33

3.0 mm (kg/m)

3.80

Expand Collapse

Height x Width (mm)

60 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.91

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

70 x 25

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.16

2.0 mm (kg/m)

2.85

2.5 mm (kg/m)

3.52

3.0 mm (kg/m)

4.04

Expand Collapse

Height x Width (mm)

70 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

70 x 50

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Height x Width (mm)

80 x 20

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.28

2.0 mm (kg/m)

3.01

2.5 mm (kg/m)

3.72

3.0 mm (kg/m)

4.28

Expand Collapse

Height x Width (mm)

80 x 30

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.52

2.0 mm (kg/m)

3.32

2.5 mm (kg/m)

4.11

3.0 mm (kg/m)

4.74

Expand Collapse

Height x Width (mm)

80 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

2.75

2.0 mm (kg/m)

3.64

2.5 mm (kg/m)

4.50

3.0 mm (kg/m)

5.22

Expand Collapse

Height x Width (mm)

80 x 60

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.26

2.5 mm (kg/m)

5.29

3.0 mm (kg/m)

6.16

Expand Collapse

Height x Width (mm)

100 x 40

1.0 mm (kg/m)

—

1.25 mm (kg/m)

—

1.5 mm (kg/m)

—

2.0 mm (kg/m)

4.26

2.5 mm (kg/m)

5.29

3.0 mm (kg/m)

6.16

Expand Collapse

¹⁾ Elongation A-value according to +CR2, 23%.

Flat Oval Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	0.9 mm (kg/m)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)	2.5 mm (kg/m)	3.0 mm (kg/m)
25 x 15	0.454	0.502	0.620	0.735	0.955 ¹⁾	—	—
30 x 15	0.525	0.581	0.718	0.853	1.11	—	—
35 x 15	0.596	0.659	0.816	0.970	1.269	—	—
38 x 20	0.678	0.751	0.931	1.11	1.45	—	—
40 x 20	—	0.783	0.971	1.155	1.516	—	—
40 x 25	—	0.827	1.03	1.22	1.61	—	—
45 x 25	—	0.906	1.125	1.340	1.762	2.172	2.570
50 x 20	—	0.940	1.167	1.391	1.830	2.256	2.671
60 x 15	—	1.052	1.307	1.559	2.054	2.537	3.007
70 x 9	—	1.155	1.436	1.714	2.261	—	—
78 x 38	—	—	1.918	2.292	3.032	3.759	4.473

Compare parameters

Select one parameter to compare

0.9 mm (kg/m)

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

2.5 mm (kg/m)

3.0 mm (kg/m)

Height x Width (mm)

25 x 15

0.9 mm (kg/m)

0.454

1.0 mm (kg/m)

0.502

1.25 mm (kg/m)

0.620

1.5 mm (kg/m)

0.735

2.0 mm (kg/m)

0.955 ¹⁾

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

30 x 15

0.9 mm (kg/m)

0.525

1.0 mm (kg/m)

0.581

1.25 mm (kg/m)

0.718

1.5 mm (kg/m)

0.853

2.0 mm (kg/m)

1.11

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

35 x 15

0.9 mm (kg/m)

0.596

1.0 mm (kg/m)

0.659

1.25 mm (kg/m)

0.816

1.5 mm (kg/m)

0.970

2.0 mm (kg/m)

1.269

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

38 x 20

0.9 mm (kg/m)

0.678

1.0 mm (kg/m)

0.751

1.25 mm (kg/m)

0.931

1.5 mm (kg/m)

1.11

2.0 mm (kg/m)

1.45

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

40 x 20

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.783

1.25 mm (kg/m)

0.971

1.5 mm (kg/m)

1.155

2.0 mm (kg/m)

1.516

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

40 x 25

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.827

1.25 mm (kg/m)

1.03

1.5 mm (kg/m)

1.22

2.0 mm (kg/m)

1.61

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

45 x 25

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.906

1.25 mm (kg/m)

1.125

1.5 mm (kg/m)

1.340

2.0 mm (kg/m)

1.762

2.5 mm (kg/m)

2.172

3.0 mm (kg/m)

2.570

Expand Collapse

Height x Width (mm)

50 x 20

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.940

1.25 mm (kg/m)

1.167

1.5 mm (kg/m)

1.391

2.0 mm (kg/m)

1.830

2.5 mm (kg/m)

2.256

3.0 mm (kg/m)

2.671

Expand Collapse

Height x Width (mm)

60 x 15

0.9 mm (kg/m)

—

1.0 mm (kg/m)

1.052

1.25 mm (kg/m)

1.307

1.5 mm (kg/m)

1.559

2.0 mm (kg/m)

2.054

2.5 mm (kg/m)

2.537

3.0 mm (kg/m)

3.007

Expand Collapse

Height x Width (mm)

70 x 9

0.9 mm (kg/m)

—

1.0 mm (kg/m)

1.155

1.25 mm (kg/m)

1.436

1.5 mm (kg/m)

1.714

2.0 mm (kg/m)

2.261

2.5 mm (kg/m)

—

3.0 mm (kg/m)

—

Expand Collapse

Height x Width (mm)

78 x 38

0.9 mm (kg/m)

—

1.0 mm (kg/m)

—

1.25 mm (kg/m)

1.918

1.5 mm (kg/m)

2.292

2.0 mm (kg/m)

3.032

2.5 mm (kg/m)

3.759

3.0 mm (kg/m)

4.473

Expand Collapse

¹⁾ Elongation A-value according to +CR2, 23%.

Oval Dimensions

Hide/Show specific columns Edit

Select columns to display

Height x Width (mm)	0.9 mm (kg/m)	1.0 mm (kg/m)	1.25 mm (kg/m)	1.5 mm (kg/m)	2.0 mm (kg/m)
22 x 16.5	0.407	0.450	0.555	0.657	0.851 ¹⁾
31 x 17.5	—	0.573	0.709	0.842	1.097

Compare parameters

Select one parameter to compare

0.9 mm (kg/m)

1.0 mm (kg/m)

1.25 mm (kg/m)

1.5 mm (kg/m)

2.0 mm (kg/m)

Height x Width (mm)

22 x 16.5

0.9 mm (kg/m)

0.407

1.0 mm (kg/m)

0.450

1.25 mm (kg/m)

0.555

1.5 mm (kg/m)

0.657

2.0 mm (kg/m)

0.851 ¹⁾

Expand Collapse

Height x Width (mm)

31 x 17.5

0.9 mm (kg/m)

—

1.0 mm (kg/m)

0.573

1.25 mm (kg/m)

0.709

1.5 mm (kg/m)

0.842

2.0 mm (kg/m)

1.097

Expand Collapse

¹⁾ Elongation A-value according to +CR2, 23%.

Mechanical Properties

Hide/Show specific columns Edit

Select columns to display

Yield strength R_p0.2 (min MPa)	Tensile strength R_m (min MPa)	Elongation A (min %)
220	310	28 ¹⁾

Compare parameters

Select one parameter to compare

Tensile strength R_m
(min MPa)

Elongation A
(min %)

Yield strength R_p0.2
(min MPa)

220

Tensile strength R_m
(min MPa)

310

Elongation A
(min %)

28 ¹⁾

Expand Collapse

Mechanical properties meet or exceed the requirements of EN 10305 (+CR2).

¹⁾ Value exceed the requirements of EN 10305.

Chemical Composition (ladle analysis)

Hide/Show specific columns Edit

Select columns to display

C (max %)	Si¹⁾ (max %)	Mn (max %)	P¹⁾ (max %)	S²⁾ (max %)	Al_tot³⁾ (min %)
0.10	0.05	0.70	0.020 ²⁾	0.020	0.015

Compare parameters

Select one parameter to compare

Si¹⁾
(max %)

Mn
(max %)

P¹⁾
(max %)

S²⁾
(max %)

Al_tot³⁾
(min %)

C
(max %)

0.10

Si¹⁾
(max %)

0.05

Mn
(max %)

0.70

P¹⁾
(max %)

0.020 ²⁾

S²⁾
(max %)

0.020

Al_tot³⁾
(min %)

0.015

Expand Collapse

Chemical composition meets or exceeds the requirements of EN 10305.

If other chemical elements such as Ti, Nb or V are used, the content of these elements are reported in the inspection document.

¹⁾ SSAB Form Tube C grade is suitable for high quality hot-dip galvanizing (Si < 0.03%, Si+2.5P < 0.06%). SSAB Form Tube H grade is suitable for high quality hot-dip galvanizing (Si < 0.03%, Si +2.5 P < 0.06%)

²⁾ Low level of impurities ensure excellent formability and weldability

³⁾ This requirement is not applicable provided the steel contains a sufficient amount of other nitrogen binding elements, such as Ti, Nb or V.

Tolerances

Tolerance Circular

Hide/Show specific columns Edit

Select columns to display

Characteristic	Circular precision tubes Tolerances meet or exceed the requirements of EN 10305-3
Outside diameter (D) ⁽¹ D < 20 mm 20 ≤ D < 32 mm 32 ≤ D < 44 mm 44 ≤ D < 55 mm 55 ≤ D < 70 mm 70 ≤ D < 80 mm 80 ≤ D < 100 mm	±0.12 mm ±0.15 mm ±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm
Out-of-roundness	The diameter tolerances include the out-of-roundness
Thickness (T)	T ≤ 1.5 mm: ±0.15 mm T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured length
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.6 mm, when T ≤ 1.5 mm g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Characteristic

Outside diameter (D) ⁽¹
D < 20 mm
20 ≤ D < 32 mm
32 ≤ D < 44 mm
44 ≤ D < 55 mm
55 ≤ D < 70 mm
70 ≤ D < 80 mm
80 ≤ D < 100 mm

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

±0.12 mm
±0.15 mm
±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm

Characteristic

Out-of-roundness

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

The diameter tolerances include the out-of-roundness

Characteristic

Thickness (T)

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

T ≤ 1.5 mm: ±0.15 mm
T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Maximum 0.15% of measured length

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

g ≤ 0.3 mm
g < 0.6 mm, when T ≤ 1.5 mm
g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Mill length

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Circular precision tubes
Tolerances meet or exceed the requirements of EN 10305-3

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Square

Hide/Show specific columns Edit

Select columns to display

Characteristic	Square precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm 70 ≤ H < 80 mm	±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm
Side concavity and convexity	Included in outside dimension tolerance
Thickness (T)	T≤ 1.5 mm: ±0.15 mm T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.6 mm, when T ≤ 1.5 mm g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm
Squareness of side	90° ±1°
Corner profile	R < 1.5 x T, when T ≤ 2.5 mm R < 2.2 x T, when T > 2.5 mm
Twist (V)	V ≤ 3 mm for B and H ≤ 30 mm V ≤ B/10 or ≤ H/10 for B or H > 30 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm
70 ≤ H < 80 mm

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm

Characteristic

Side concavity and convexity

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T≤ 1.5 mm: ±0.15 mm
T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.6 mm, when T ≤ 1.5 mm
g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Squareness of side

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

90° ±1°

Characteristic

Corner profile

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

R < 1.5 x T, when T ≤ 2.5 mm
R < 2.2 x T, when T > 2.5 mm

Characteristic

Twist (V)

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

V ≤ 3 mm for B and H ≤ 30 mm
V ≤ B/10 or ≤ H/10 for B or H > 30 mm

Characteristic

Mill length

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Square precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Rectangular

Hide/Show specific columns Edit

Select columns to display

Characteristic	Rectangular precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm 70 ≤ H < 80 mm 80 ≤ H < 90 mm 90 ≤ H < 100 mm 100 ≤ H < 120 mm	±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm ±0.50 mm ±0.60 mm ±0.65 mm
Side concavity and convexity	Included in outside dimension tolerance
Thickness (T)	T≤ 1.5 mm: ±0.15 mm T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.6 mm, when T ≤ 1.5 mm g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm
Squareness of side	90° ±1°
Corner profile	R < 1.5 x T, when T ≤ 2.5 mm R < 2.2 x T, when T > 2.5 mm
Twist (V)	V ≤ 3 mm for B and H ≤ 30 mm V ≤ B/10 or ≤ H/10 for B or H > 30 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm
70 ≤ H < 80 mm
80 ≤ H < 90 mm
90 ≤ H < 100 mm
100 ≤ H < 120 mm

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm
±0.50 mm
±0.60 mm
±0.65 mm

Characteristic

Side concavity and convexity

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T≤ 1.5 mm: ±0.15 mm
T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On narrow side for square and rectangular, optionally on wide side. On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.6 mm, when T ≤ 1.5 mm
g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Squareness of side

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

90° ±1°

Characteristic

Corner profile

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

R < 1.5 x T, when T ≤ 2.5 mm
R < 2.2 x T, when T > 2.5 mm

Characteristic

Twist (V)

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

V ≤ 3 mm for B and H ≤ 30 mm
V ≤ B/10 or ≤ H/10 for B or H > 30 mm

Characteristic

Mill length

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Rectangular precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Flat Oval

Hide/Show specific columns Edit

Select columns to display

Characteristic	Flat oval precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm 70 ≤ H < 80 mm 80 ≤ H < 90 mm 90 ≤ H < 100 mm 100 ≤ H < 120 mm	±0.20 mm ±0.25 mm ±0.30 mm ±0.35 mm ±0.40 mm
Concavity/convexity	Included in outside dimension tolerance
Thickness (T)	T≤ 1.5 mm: ±0.15 mm T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.6 mm, when T ≤ 1.5 mm g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm
70 ≤ H < 80 mm
80 ≤ H < 90 mm
90 ≤ H < 100 mm
100 ≤ H < 120 mm

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm
±0.30 mm
±0.35 mm
±0.40 mm

Characteristic

Concavity/convexity

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T≤ 1.5 mm: ±0.15 mm
T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.6 mm, when T ≤ 1.5 mm
g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Mill length

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Flat oval precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Tolerance Oval

Hide/Show specific columns Edit

Select columns to display

Characteristic	Oval (elliptic) precision tubes Tolerances meet or exceed the requirements of EN 10305-5
Outside dimensions (H) and (B), longer side¹⁾ H < 25 mm 25 ≤ H < 40 mm 40 ≤ H < 60 mm 60≤ H < 70 mm 70 ≤ H < 80 mm 80 ≤ H < 90 mm 90 ≤ H < 100 mm 100 ≤ H < 120 mm	±0.20 mm ±0.25 mm
Concavity/convexity	Included in outside dimension tolerance
Thickness (T)	T ≤ 1.5 mm: ±0.15 mm T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
Straightness	Maximum 0.15% of measured tube length when shorter side length > 30 mm Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm
Location of weld seam from the centre line	On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.
Height of internal weld bead, g; Bead removed Bead not removed	g ≤ 0.3 mm g < 0.6 mm, when T ≤ 1.5 mm g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm
Mill length	0/+50 mm, standard length 6000 mm
Exact length, single cutting	Agreed at the time of enquiry and order
Exact length, bundle cutting	Agreed at the time of enquiry and order

Compare parameters

Select one parameter to compare

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Characteristic

Outside dimensions (H) and (B), longer side¹⁾
H < 25 mm
25 ≤ H < 40 mm
40 ≤ H < 60 mm
60≤ H < 70 mm
70 ≤ H < 80 mm
80 ≤ H < 90 mm
90 ≤ H < 100 mm
100 ≤ H < 120 mm

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

±0.20 mm
±0.25 mm

Characteristic

Concavity/convexity

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Included in outside dimension tolerance

Characteristic

Thickness (T)

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

T ≤ 1.5 mm: ±0.15 mm
T >1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller

Characteristic

Straightness

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Maximum 0.15% of measured tube length when shorter side length > 30 mm
Maximum 0.25% of measured tube length when the shorter side length ≤ 30 mm

Characteristic

Location of weld seam from the centre line

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

On wide side for flat oval and ellipse. ± 10% of side length or ± 3 mm, whichever is greater.

Characteristic

Height of internal weld bead, g;
Bead removed
Bead not removed

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

g ≤ 0.3 mm
g < 0.6 mm, when T ≤ 1.5 mm
g < 0.4 x T, when 1.5 mm < T ≤ 3.0 mm

Characteristic

Mill length

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

0/+50 mm, standard length 6000 mm

Characteristic

Exact length, single cutting

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

Characteristic

Exact length, bundle cutting

Oval (elliptic) precision tubes
Tolerances meet or exceed the requirements of EN 10305-5

Agreed at the time of enquiry and order

¹⁾For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

Surface designation and general usability

Hide/Show specific columns Edit

Select columns to display

Designation	Definition	Usability
C	Cold rolled	Suitable for painting and chromium plating
H	Hot rolled and pickled	Suitable for painting and hot-dip galvanizing
Z	Zinc coated (zinc 99%)	Suitable when corrosion resistance is required
ZA	Galfan coated (zinc 95%-aluminium 5%)	Suitable when corrosion resistance and demanding forming are required
ZF	Galvannealed coated (zinc 90%-iron 10%)	Suitable when corrosion resistance and paintability are required

Compare parameters

Select one parameter to compare

Definition

Usability

Designation

Definition

Cold rolled

Usability

Suitable for painting and chromium plating

Expand Collapse

Designation

Definition

Hot rolled and pickled

Usability

Suitable for painting and hot-dip galvanizing

Expand Collapse

Designation

Definition

Zinc coated (zinc 99%)

Usability

Suitable when corrosion resistance is required

Expand Collapse

Designation

Definition

Galfan coated (zinc 95%-aluminium 5%)

Usability

Suitable when corrosion resistance and demanding forming are required

Expand Collapse

Designation

Definition

Galvannealed coated (zinc 90%-iron 10%)

Usability

Suitable when corrosion resistance and paintability are required

Expand Collapse

Surface is slightly oiled to protect it from corrosion during transportation and short-term storage. By request, tubes can be delivered dry, however in that case SSAB will not be responsible for any possible rust.

Surface roughness, Ra

Hide/Show specific columns Edit

Select columns to display

Designation	Ra value
C	< 0.6 µm
H	< 2.0 µm

Compare parameters

Select one parameter to compare

Ra value

Designation

Ra value

< 0.6 µm

Designation

Ra value

< 2.0 µm

Different metal coatings and minimum coating mass

Hide/Show specific columns Edit

Select columns to display

Coating thickness ¹⁾(µm)	Zinc (Z)²⁾ (g/m²)	Galfan (ZA)²⁾ (g/m²)	Galvannealed (ZF)²⁾ (g/m²)
7	Z100	—	ZF100
8	—	—	ZF120
10	Z140	ZA130	ZF140
20	Z275	ZA255	—
25	Z350	ZA300	—
32	Z450	—	—
42	Z600	—	—

Compare parameters

Select one parameter to compare

Zinc (Z)²⁾ (g/m²)

Galfan (ZA)²⁾ (g/m²)

Galvannealed (ZF)²⁾ (g/m²)

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z100

Galfan (ZA)²⁾ (g/m²)

—

Galvannealed (ZF)²⁾ (g/m²)

ZF100

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

—

Galfan (ZA)²⁾ (g/m²)

—

Galvannealed (ZF)²⁾ (g/m²)

ZF120

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z140

Galfan (ZA)²⁾ (g/m²)

ZA130

Galvannealed (ZF)²⁾ (g/m²)

ZF140

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z275

Galfan (ZA)²⁾ (g/m²)

ZA255

Galvannealed (ZF)²⁾ (g/m²)

—

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z350

Galfan (ZA)²⁾ (g/m²)

ZA300

Galvannealed (ZF)²⁾ (g/m²)

—

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z450

Galfan (ZA)²⁾ (g/m²)

—

Galvannealed (ZF)²⁾ (g/m²)

—

Expand Collapse

Coating thickness ¹⁾(µm)

Zinc (Z)²⁾ (g/m²)

Z600

Galfan (ZA)²⁾ (g/m²)

—

Galvannealed (ZF)²⁾ (g/m²)

—

Expand Collapse

Galfan coating ZA255 by SSAB has been granted a C3 15 (years) certification by RISE, Research Institute of Sweden AB.

¹⁾ Theoretical guidance values for coating thickness per surface.

²⁾ Minimum coating mass - g/m2 refers the total weight of coatings on both sides of a 1 m2 plate.

Indicative specification for proper coating selection

Hide/Show specific columns Edit

Select columns to display

Coating type	Coating mass (g/m²)	Coating life - marine (year)	Properties
Z	100	10	Good weldability and formability with tolerable corrosion resistance.
Z	275	25	Good combination of corrosion resistance and usability.
Z	350	30	Excellent corrosion resistance.
Z	450	40	Excellent corrosion resistance.
Z	600	60	Superior corrosion resistance.
ZA	130	40	Excellent corrosion resistance and formability.
ZA	255	80	Superior corrosion resistance in marine condition.
ZA	300	95	Superior corrosion resistance in marine condition.
ZF	100	15	Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.
ZF	120	17	Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.
ZF	140	20	Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Compare parameters

Select one parameter to compare

Coating mass (g/m²)

Coating life - marine (year)

Properties

Coating type

Coating mass (g/m²)

100

Coating life - marine (year)

Properties

Good weldability and formability with tolerable corrosion resistance.

Expand Collapse

Coating type

Coating mass (g/m²)

275

Coating life - marine (year)

Properties

Good combination of corrosion resistance and usability.

Expand Collapse

Coating type

Coating mass (g/m²)

350

Coating life - marine (year)

Properties

Excellent corrosion resistance.

Expand Collapse

Coating type

Coating mass (g/m²)

450

Coating life - marine (year)

Properties

Excellent corrosion resistance.

Expand Collapse

Coating type

Coating mass (g/m²)

600

Coating life - marine (year)

Properties

Superior corrosion resistance.

Expand Collapse

Coating type

Coating mass (g/m²)

130

Coating life - marine (year)

Properties

Excellent corrosion resistance and formability.

Expand Collapse

Coating type

Coating mass (g/m²)

255

Coating life - marine (year)

Properties

Superior corrosion resistance in marine condition.

Expand Collapse

Coating type

Coating mass (g/m²)

300

Coating life - marine (year)

Properties

Superior corrosion resistance in marine condition.

Expand Collapse

Coating type

Coating mass (g/m²)

100

Coating life - marine (year)

Properties

Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Expand Collapse

Coating type

Coating mass (g/m²)

120

Coating life - marine (year)

Properties

Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Expand Collapse

Coating type

Coating mass (g/m²)

140

Coating life - marine (year)

Properties

Superior paint adhesion and corrosion reistance as painted. Weldability in same level as cold rolled material under proper welding conditions.

Get datasheet by email

General Product Description

Dimension Range

Select one parameter to compare

Comparison

Circular Dimensions

Select one parameter to compare

Comparison

Square Dimensions

Select one parameter to compare

Comparison

Rectangular Dimensions

Select one parameter to compare

Comparison

Flat Oval Dimensions

Select one parameter to compare

Comparison

Oval Dimensions

Select one parameter to compare

Comparison

Mechanical Properties

Select one parameter to compare

Comparison

Chemical Composition (ladle analysis)

Select one parameter to compare

Comparison

Tolerances

Tolerance Circular

Select one parameter to compare

Comparison

Tolerance Square

Select one parameter to compare

Comparison

Tolerance Rectangular

Select one parameter to compare

Comparison

Tolerance Flat Oval

Select one parameter to compare

Comparison

Tolerance Oval

Select one parameter to compare

Comparison

Surface designation and general usability

Select one parameter to compare

Comparison

Surface roughness, Ra

Select one parameter to compare

Comparison

Different metal coatings and minimum coating mass

Select one parameter to compare

Comparison

Indicative specification for proper coating selection

Select one parameter to compare

Comparison

Other precision tube products

Docol® Tube R8

Docol® Tube 980DP

Docol® Tube 780DP

SSAB Boron Tube 22

SSAB Form Tube 320

SSAB Form Tube 420