Wear design > Wear Lining guidelines for mining truck bodies

Wear and impact

When an excavator dumps its first load onto the floor of a mining truck, the body must withstand the heavy impact from large boulders striking the floor’s midsection. This initial damage is typically caused by plastic deformation or cracking, with wear being a secondary factor. After the first load, the floor becomes covered, and subsequent bucket loads no longer hit the floor directly. As more material is added, a heap forms, and the boulders might roll or slide into the sides or front plate, causing denting.

Damage in a mining truck body: a) Direct hit in the floor’s midsection. b) Rocks roll and hit the front and sides. c) During discharge, sliding wear damages the floor and sides primarily in the tail of the body.

Category and tags

Wear designWear

Contact Technical support


The information in this report is only applicable to SSAB’s products and should not be applied to any other products than original SSAB products. 


This report provides general results and recommendations for SSAB steel products. This report is subject to SSAB’s Terms of Use. It shall be the user's responsibility to verify that the information contained herein is correct and is suitable to be used for the particular purpose and application of the user. The report is intended to be used by professional users only who possess adequate expertise, qualification and knowledge for the safe and correct use of the results and recommendations in this report. This report is provided “as is”. The use of the report is at user’s own discretion and risk and that users will be solely responsible for any use of this report. SSAB disclaims any liability for the content or potential errors of this report, including but not limited to warranties and condition of merchantability or fitness for a particular purpose or suitability for individual applications. SSAB shall not be liable for any kind of direct or indirect damages and/or costs related to or arising therefrom, whether special, incidental, consequential or directly or indirectly related to the use of, or the inability to use, the report or the content, information or results included therein.