The Strenx® range of high-strength structural steel tubes come in circular, square and rectangular shapes – even customized shapes are available upon request. Strenx® tubes have a superior strength to weight ratio for your high-performing equipment.
Order trial material Get technical adviceSUITABLE APPLICATIONS
Advanced load-bearing structures in transportation,
lifting and agriculture
TYPE OF PRODUCTS
High-strength hollow sections
AVAILABLE SHAPES
Circular, square and rectangular
STRENX® TUBE 700MLH
Advanced structural tube,
Wide selection of sizes
Typical applications for Strenx® Tube 700MLH include load-bearing structures in lifting, material handling, transportation and agriculture, especially in conditions that require extremely high toughness.
Toughness: 27 J at -50 °C (20 ft-lb/-58°F)°
Circular: 42.4-323.9 mm (1.90" - 12.75")
Square: 40x40-300x300 mm (1.575" x 1.575" - 11.81" x 11.81")
Rectangular: 50x30-400x200 mm (1.97" x 1.18" - 15.75" x 7.87")
Wall thickness: 2.0-10.0 mm (0.079" - 0.393")
Mill length: 6-12/18 m (19.68'-39.39'/59.05')
STRENX® TUBE 900MH
High-strength structural tube in
multiple shapes
Typical applications for Strenx® Tube 900MH include advanced load-bearing structures in the lifting, transportation and agriculture segments.
Toughness: 40 J at -20 °C (30 ft-lb at -4°F)
Circular: 139.7-244.5 (5.5"- 9.63")
Square: 100x100-200x200 mm (3.94" x 3.94" - 7.87" x 7.87")
Rectangular: 120x80-250x150 mm (4.72" x 3.15" - 9.84" x 5.91")
Wall thickness: 4.0-6.0 mm (0.157" - 0.236")
Mill length: 6-12/18 m (19.68'-39.39'/59.05')
STRENX® TUBE 960MH
Structural tube at 960 MPa
yield strength
Typical applications for Strenx® Tube 960MH include advanced load-bearing structures in the lifting, transportation and agriculture segments.
Toughness: Toughness: 40 J at -20 °C (30 ft-lb at -4°F)
Circular: 139.7-244.5 mm (5.5"- 9.63")
Square: 100x100-200x200 mm (3.94" x 3.94" - 7.87" x 7.87")
Rectangular: 120x80-250x150 mm (4.72" x 3.15" - 9.84" x 5.91")
Wall thickness: 4.0-6.0 mm (0.157" - 0.236")
Mill length: 6-12/18 m (19.68'-39.39'/59.05')
STRENX® TUBE 700QLH
Advanced hot-finished tube
with high toughness
Typical applications for Strenx® Tube 960QLH are load-bearing lattice structures in lifting, material handling, transportation and agriculture, especially in conditions where high toughness is needed..
Toughness: 40 J at -40 °C (30 ft-lb at -40°F)
STRENX® TUBE 960QLH
Hot-finished tube at 960 MPa
yield strength
Typical applications for Strenx Tube 960QLH are load-bearing lattice structures in lifting, material handling, transportation and agriculture, especially in conditions where extremely good toughness is needed.
Toughness: 40 J at -40 °C (30 ft-lb at -40°F)
“Our customers got a 40% lighter row planter when we upgraded to Strenx® high-strength
structural steel,” sasys Gideon Schreuder, Managing Director at Equalizer
Strenx® tubes can be welded using any conventional welding method. MAG welding is the most common technique today, since it is very easy to automate for high productivity
The properties and fine surface finish of Strenx® tubes make it perfect for laser cutting. Thermal cutting of Strenx® tubes is also possible with oxy-fuel flame and plasma. Since tubes are cold formed, they contain residual stresses. Proper design can control distortion when cutting. If distortion becomes a problem the tubes can be stress relief annealed.
Strenx® Tubes can sawed with normal practices Compared to mild steels tubes, saw blade wear can be lower, as the low carbon equivalent prevents the longitudinal weld seam from hardening in the welding process.
Strenx® Tubes and Sections meet or exceed the tolerances of European standards: EN10219 for cold formed welded steel structural hollow sections and EN10210 for hot finished steel structural hollow sections.
| PRODUCT NAME | DIMENSIONS | STANDARDS |
|---|---|---|
| STRENX® TUBE 700MLH |
Thickness 2.0 - 10.0 mm |
EN 10219-3 |
| STRENX® TUBE 900MH | Thickness 4.0 - 6.0 mm Diameter: 139.7 - 244.5 mm Width: 100 - 200 mm Mill length: 6000 - 12000/18000 mm |
EN 10219-3 |
| STRENX® TUBE 960MH | Thickness 4.0 - 6.0 mm Diameter: 139.7 - 244.5 mm Width: 100 - 200 mm Mill length: 6000 - 12000/18000 mm |
EN 10219-3 |
| STRENX® TUBE 700QLH | Thickness 3.0 - 6.0 mm Diameter: 76.1 - 133.0 mm Mill length: 6000 - 12000 mm |
EN 10210 |
| STRENX® TUBE 960QLH |
Thickness 3.0 - 6.0 mm |
EN 10210-2 |