The ballistic protection steel with high hardness.
Ramor® 500W is a ballistic steel with weathering steel features, and it has excellent resistance against atmospheric corrosion.
Ramor® 500W is a development product and available as cut-to-length sheet in thicknesses of 4.0 - 6.5 mm with a nominal hardness of 500 HBW.
Ramor® 500W has according to G101-04, a typical corrosion index of 7.3. The delivered condition is quenched, and the sheets are not intended for further heat treatment.
Ramor® 500W
Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual/coil.
Hardness is measured on a milled surface 0.3-2 mm below plate surface.
The steel is grain refined. Phosphorous and sulphur are not intentionally alloying elements.
More details are given on www.ssab.com.
Sheets are delivered with mill edges cut as standard.
Tolerances according to EN 10051.
Tolerances according to SSAB’s flatness tolerances which are more restrictive than EN 10051.
According to EN 10163-2 Class B, Subclass 3.
Ramor® is delivered in quenched condition.
Preliminary products are products that still are under development or in a trial delivery phase.
The shown values represent the targeted requirements for the final product, and the availability of the product is subject to limitations and trial deliveries. Their conditions have to be separately agreed upon.