Equipment surfaces that can withstand both impact wear and sliding wear are essential for extracting, moving, processing, milling, and recycling minerals and materials. Using wear parts made of Hardox® wear plate and Duroxite® overlay, we can extend the service life of equipment — sometimes by a factor of 2x to 4x.
Part of the re-engineering of an entire mining chute, featuring a Hardox® 500 shell with Hardox® 600 liners.
Grizzly basket segments and bars made using Hardox® 450 and Hardox® 500 wear plate.
Static grizzly made from Hardox® 500 wear plate, 50mm.
Mines and quarries are a big part of our business – and with good reason. We’re adept at handling aggressive abrasives on production-critical equipment, such as:
Lamella plates for apron feeder at a cement plant made in Hardox® 450 wear plate.
Vertical shaft impact crusher rotor made from Hardox® 450 and Hardox® 600 wear plate.
The crushing, grinding, and mixing that goes into production of cement and concrete is notoriously abrasive on the plant’s wear components. To address extreme wear situations, we can use a combination of wear parts made of Hardox® wear plate and Duroxite® overlay for equipment such as:
Refurbished refuse (garbage) compactor made from 4 mm Hardox® HiAce wear plate for protection against abrasive and acidic loads.
Screens and screen clamps made from Hardox® wear plate.
Trommel screens made from Hardox® wear plate.
Waste management and recycling requires compacting and/or shredding items that were designed to resist their destruction. The ingenious equipment made to repurpose waste have, understandably, numerous parts that are vulnerable to impact and abrasive wear. Let us help extend the life of your:
We offer wear upgrades for liner plates used on conveyors, feeders, chutes, and cones, as well as other wear components found in steel and aluminum mills. “Hot” applications can benefit from the use of Hardox® HiTemp wear plate.
With Hardox® HiTemp wear plate, mills have a cost-efficient solution for wear resistance at high temperatures in the 300° to 500°C range.
Hardox® Pipes and Duroxite® Pipes provide longer service life for the dredging of harbors, canals, or island-building applications.
Dredging pipe formed from Duroxite® 100 wear plate.
Please contact us anyway. We done some unusual applications, including a “bullet-collecting” wall at a rifle range. We are highly practical engineers, ready for your engineering and wear challenges.