Utility poles and towers in weathering steel: long-lasting, with lower environmental impacts
SSAB Weathering steel, compliant with the EN 10219 and the EN 10025-5 standards, provides a more sustainable, long-lasting corrosion resistance for telecommunication towers, power transmission towers, and electric utility poles.
Heavy duty corrosion resistance – with lower embedded CO2 – for electric poles and towers
With no galvanizing or painting required – ever – SSAB Weathering steel delivers a more sustainable corrosion resistance solution for your towers and utility poles. SSAB Weathering steel lowers CO2 emissions throughout the production process, as well as during service by eliminating the need to recoat. Unlike galvanized steel, there is no zinc run-off and the patina color blends in well in both natural and city settings.
3 reasons why SSAB Weathering can be optimal for poles, masts, and towers
Protective patina layer
- SSAB Weathering steel forms a tight, dense patina layer to resist corrosion in typical application environments – but without galvanizing’s CO2 emissions.
- The patina self-repairs scratches, so there’s no need to coat surface damage incurred during transit or installation.
Reduced emissions means increased sustainability
- No galvanizing means lower CO2 emissions, reduced handling, and a speedier supply chain.
- A more sustainable source than steel from suppliers with lower environmental standards.
- Long service life: see Tested Performance below.
Greater design freedom
- Our range of 355 to 960 MPa (YS) weathering steels allows for innovative designs of transmission towers and poles.
- High-strength SSAB Weathering steels are lighter yet strong.
- Reduces transportation costs to installation site.
- Easier to install on challenging terrains.
Lowers CO2 emissions by at least 120 kg for every tonne of steel
Galvanizing 8mm thick steel with an 85-micron (μm) coating can add 120 kg CO2e to every tonne, before factoring in added transportation to galvanizing facilities. To further reduce CO2e, check out our steels with virtually zero fossil carbon emission.
Performance tested – in harsh Finnish weather
Cumulative corrosion loss – as measured over 32 years on bridges in Finland – demonstrates the superior corrosion resistance of SSAB Weathering steels.
Hot Dip Galvanized steel vs. SSAB Weathering steel
Application considerations for weathering steel for power line poles and towers
Wetting-drying cycles
Weather-resistant steel requires a variation of conditions between wetting and drying
- Avoid structural details that can collect moisture and dirt.
- Avoid contact with the ground and vegetation.
- Submergence must be taken into account in design.
Distance from coast
Chlorides can destroy the protective patina layer
- In the Baltic Sea, due to its low salt content, it is sufficient to avoid splashes.
- In the ocean, at least 1 km from the coast, depending on the location.
- In a strong chloride environment, the corrosion rate of weathering steel is equivalent to unalloyed carbon steel.
Road salt
Chlorides can destroy the protective patina layer
- Continuous use of road salt is a risk.
- Weather-resistant steel can be used in the vicinity of rarely salted road sections.
- Washing after the winter season or advanced salt mixtures can reduce the harmful effects of road salt.
Weathering steel for telecom towers and masts
Cell tower companies looking for durable corrosion resistance and lower embedded CO2 emissions in their masts can take advantage of SSAB Weathering steels’ galvanizing alternative. Another advantage: the muted presence of the patinated, weathered steel helps the telecom mast visually blend better into its surroundings.
SSAB’s Weathering steel is perfect material for nature
First transmission line made from SSAB Weathering steel was installed from Ylitornio to Liakka over ten years ago. Line is 57 kilometers long and has 222 poles and it is owned by TLS Verkko OY. SSAB delivered SSAB Weathering steel tubes to the project and VK-Electric built the line for TLS Verkko Oy.
Read more
Calculate your CO2 savings
If you choose to use Weathering steel without painting, you will save dioxide emissions. If painting, you still have reduced CO2 emissions because you would not have to repaint the steel as often as you would with a regular carbon steel.
Read more
Guide to weathering steel
High strength, low alloy weldable structural steel with exceptional corrosion resistance.
Read more