SSAB AM Engineering
Download data sheet
Download data sheet
SSAB AM Engineering is a gas atomised low-alloyed powder for additive manufacturing of high strength engineering components. SSAB AM Engineering is in particular suited in L-PBF (Laser-Powder Bed Fusion) and Direct Energy Deposition (DED or LMD).
The spherical powder enables an optimal combination of strength, toughness and high levels of isotropy in the as-built condition.
SSAB AM Engineering is a steel grade with low CO2 emissions and planned for Zero™ and fossil-free properties (see www.ssab.com/fossilfree).
Standard particle size distribution.
| L-PBF | 20 - 53 µm 1) |
|---|---|
| DED | 45 - 125 µm 1) |
1) Max 5% over and under size.
Measurement of particle size distribution is according to ISO 13322-2 (Dynamic image analysis methods).
Other particle size distributions can be arranged upon agreement.
Achievable generic data in as-built parts: L-PBF
| Density | 7.8 g/cm3 |
|---|---|
| Young´s Modulus | 200 GPa |
| Heat conductivity (W/m*K) | Thermal expansion coefficient (10-6/K) | |
|---|---|---|
| +20 °C | 30 | 13 |
| +200 °C | 34 | 15 |
| +400 °C | 35 | 14 |
Achievable mechanical properties in as-built parts: L-PBF
| Product | Hardness (HV5) |
Tensile strength (MPa) |
Yield strength (MPa) |
Elongation A5 (%) |
Impact toughness (Charpy V)at RT 1)/ at -40 oC |
|---|---|---|---|---|---|
| SSAB AM Engineering | 340 | 1240 | 1140 | 14 | 140 J / >47 J |
1) At room temperature.
All test samples have been produced on a SLM 280 2.0 system, 30 µm layer thickness and tested in the vertical direction.
| C (max %) |
Si (max %) |
Mn (max %) |
Cr (max %) |
Mo (max %) |
Fe |
|---|---|---|---|---|---|
| 0.26 | 1.5 | 1.0 | 1.5 | 0.4 | Balance |
Standard package size for SSAB AM Engineering powder is 10 kg, including silica gel bag. Other package sizes are available up on agreement.