Product & services Brands & products Hardox Product program and datasheets Hardox HiTuf

Hardox® HiTuf

Get technical advice

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data
On this page

    Dimension Range

    Hardox® HiTuf is available in thicknesses of 40.0 - 160.0 mm. Hardox® HiTuf is available in widths up to 3350 mm and lengths up to 14630 mm. For thicknesses over 125 mm preferred width is 1650 mm. More detailed information on dimensions is provided in the dimension program.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Product Thickness
      (mmin)      		 Hardness 1)
      (HBW)      		 Typical yield strength
      (MPaksi), not guaranteed
      Hardox® HiTuf 40.0 - 160.01.575 - 6.299 310 - 370 850123
      Compare parameters

      Select one parameter to compare

      Comparison

        1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface for plate. At least one test specimen per heat and 40 tons.

        The nominal material thickness will not deviate more than ± 15 mm from that of the test specimen.

        Hardox® wear plate is through-hardened. Minimum core hardness is 90 % of the guaranteed minimum surface hardness.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Product Transverse test, guaranteed impact energy,
          Charpy V 10x10 mm test specimen 1)
          Hardox® HiTuf 40 J / -40 °C
          Compare parameters

          Select one parameter to compare

          Comparison

            Product
            Hardox® HiTuf
            Transverse test, guaranteed impact energy,
            Charpy V 10x10 mm test specimen 1)
            40 J / -40 °C

            1) Impact testing according to ISO EN 148 per heat and thickness group. Average of three tests. Single value minimum 70% of specified average.

            Chemical Composition (heat analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C *)
              (max %)              		 Si *)
              (max %)              		 Mn*)
              (max %)              		 P
              (max %)              		 S
              (max %)              		 Cr*)
              (max %)              		 Ni*)
              (max %)              		 Mo*)
              (max %)              		 B*)
              (max %)
              0.20 0.60 1.60 0.050 0.020 0.70 2.0 0.70 0.005
              Compare parameters

              Select one parameter to compare

              Comparison

                The steel is grain refined. *) Intentional alloying elements.

                Carbon Equivalent CET(CEV)

                Hide/Show specific columns Edit
                Select columns to display
                  Thickness (mmin) 40.0 - 70.01.575 - 2.7560 70.1 - 160.02.760 - 6.299
                  Max CET(CEV) 0.38 (0.56) 0.41 (0.67)
                  Typ CET(CEV) 0.36 (0.55) 0.39 (0.64)
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Tolerances

                    More details are given in SSAB’s brochure Hardox® Guarantees.

                    Thickness

                    Tolerances according to Hardox® Thickness Guarantees.

                    Hardox® Guarantees meet the requirements of EN 10029 Class A, but offer more narrow tolerances.

                    Length and Width

                    According to SSAB’s dimension program. Tolerances conforms to EN 10029 or to SSAB’s standard after agreement.

                    Shape

                    Tolerances according to EN 10029.

                    Flatness

                    Tolerances according to Hardox® Flatness Guarantees Class C, which are more restrictive than EN 10029 class N.

                    Surface Properties

                    According to EN 10163-2 Class A, Subclass 1.

                    Delivery Conditions

                    The delivery condition is Quenched. The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement.

                    Delivery requirements can be found in SSAB’s brochure Hardox® Guarantees or www.ssab.com.

                    Fabrication and Other Recommendations

                    Welding, bending and machining

                    Recommendations can be found in SSABs brochures at www.hardox.com or consult Tech Support.

                    Hardox® HiTuf is not intend for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 450ºC .

                    Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.