GreenCoat Cool for roofing

GreenCoat Cool acts as a heat shield for your building.

GreenCoat Cool for roofing features special solar heat reflecting properties that make the surface stay cooler than regular coated surfaces. For buildings that need cooling, this product helps to save energy and increases the thermal comfort.

The largest difference in surface temperature between GreenCoat Cool and standard products is achieved for dark colors.

In the table below you will find typical values for some colors. Total solar reflectance¹ and Thermal IR emittance² describes the product properties.

The reverse side of the sheet is painted as standard with a two-layer grey backside coating.

SSAB color coated products comply with current REACH regulations and are fully free of chromates. GreenCoat® color coated steels are all manufactured according to EN 10169 + A1.

In this section, you will find our wide product offering with our Nordic quality steels and zinc coatings recommended for different applications. Details about product dimensions are also available.

Main applications	Recommended product*	Recommended steels	Recommended Zinc mass	Min thickness**	Width range***
Roofing, tinsmith	GreenCoat PLX Pro BT	PLX	Z350	0.60 mm	1000-1500 mm
	GreenCoat FAP Pro BT	FAP	Z350	0.60 mm	1000-1500 mm
	GreenCoat PLX Legacy	PLX	Z350	0.60 mm	1000-1500 mm

Roofing, tiles & profiles	GreenCoat Pural BT	S280GD, S320GD, S350GD	Z275	0.50 mm	1000-1500 mm
	GreenCoat Pro BT	S280GD, S320GD, S350GD	Z275	0.50 mm	1000-1500 mm
	GreenCoat Mica BT	S280GD, S320GD, S350GD	Z275	0.50 mm	1000-1500 mm
	GreenCoat Crown BT	S280GD, S320GD, S350GD	Z275	0.50 mm	1000-1300 mm
	Rough Matt Polyester	S280GD, S320GD, S350GD	Z275	0.45 mm	1000-1424 mm
	Polyester	S280GD-S350GD, DX51D	Z275	0.42 mm	1000-1500 mm

Roofing, modular	GreenCoat Crown BT	S280GD, S320GD, S350GD	Z275	0.50 mm	1000-1300 mm

Rain water systems	GreenCoat RWS Pro	FAX, PLX	Z275	0.50 mm	1000-1500 mm

Facades	GreenCoat Hiarc	S280GD, S320GD, DX51D	Z275	0.50 mm	1000-1500 mm
	GreenCoat Hiarc Max	S280GD, S320GD, DX51D	Z275	0.50 mm	1000-1500 mm
	GreenCoat Crown BT	S280GD, S320GD	Z275	0.50 mm	1000-1300 mm
	Polyester	S280GD, S320GD, DX51D	Z275	0.42 mm	1000-1500 mm

Indoor applications	Polyester Indoor	S250GD-S350GD, DX51D	Z100	0.40 mm	1000-1424 mm
	GreenCoat Foodsafe BT	S250GD-S350GD, DX51D	Z100	0.50 mm	1000-1500 mm
	Laminate Foodsafe	S250GD-S350GD, DX51D	Z275	0.42 mm	1000-1400 mm
	Epoxy	S250GD-S350GD, DX51D	Z100	0.40 mm	1000-1500 mm

* In addition to these we have a wide range of so called custom made products. Please contact SSAB Europe Tech support.
** Please take into account the country specific building recommendations concerning the minimum thickness. If other thicknesses are required, please contact SSAB Tech Support. Max thickness is 1,5 mm.
*** Max width depends on steel thickness. If other steel dimensions are needed, please contact SSAB Tech Support.

	Thermal total solar reflectance¹		Thermal IR emittance²
Colors	GreenCoat Cool	Standard color	GreenCoat Cool	Standard color
015 - Black	0.22	0.05	0.91	0.91
087 - Antracite	0.33	0.10	0.91	0.91
454 - Dark Grey	0.25	0.07	0.91	0.92
859 - Juniper Green	0.27	0.07	0.91	0.92
036 - Lead Grey	0.24	0.08	0.91	0.91
758 - Maroon	0.36	0.23	0.91	0.94

GreenCoat Cool