Toolox® 44 Round Bars

Pre-hardened, precise, predictable steel, now in round bars

Contact us

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    Pre-hardened, precise, predictable steel, now in round bars.

    Toolox® round bars are pre-hardened, ready-to-use quenched and tempered tool steels that come in a wide range of diameters from small to large.

    Suitable for engineering applications in tool holders and in different types of shafts and rolls, the diameter dimensions also provide a better solution for round parts in tooling applications like molding and in dies for aluminium die casting.

    Dimension Range

    Toolox® 44 round bars is available in diameters 21.0 - 282.0 mm. Other dimensions can be available on request.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Diameter (mmin) Hardness 1)
      (HBW)
      21.0 - 282.00.827 - 6.772 410 - 475
      Compare parameters

      Select one parameter to compare

      Comparison

        Diameter (mmin)
        21.0 - 282.00.827 - 6.772
        Hardness 1)
        (HBW)
        410 - 475

        1) Hardness is measured, according to EN ISO 6506-1, on a milled surface 0.5 - 2 mm below the plate surface. Bar hardness is measured on a milled surface, with indents positioned as impact test according to EN 10 083.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Diameter (mmin) Min. impact energy for longitudinal testing,
          Charpy V 10x10 mm test specimen 1)
          21.0 - 141.00.827 - 5.551 18 J / 20 °C13 ft-lbs / 68 °F
          142.0 - 282.05.591 - 6.772 11 J / 20 °C8 ft-lbs / 68 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Diameter (mmin)
            21.0 - 141.00.827 - 5.551
            Min. impact energy for longitudinal testing,
            Charpy V 10x10 mm test specimen 1)
            18 J / 20 °C13 ft-lbs / 68 °F
            Diameter (mmin)
            142.0 - 282.05.591 - 6.772
            Min. impact energy for longitudinal testing,
            Charpy V 10x10 mm test specimen 1)
            11 J / 20 °C8 ft-lbs / 68 °F

            1) Impact testing according to EN 10 083.

            Ultrasonic testing

            Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.

            Tolerances

            Tolerances for Toolox® round bars are according to EN 10 060.

            For more information concerning dimensions and tolerances, see Toolox® round bars dimensional program: Toolox® engineering & tool steel dimensional program bars or Toolox® Guarantees available at www.ssab.com or www.toolox.com.

            Delivery Conditions

            Quenched and Tempered at a minimum temperature of 590 °C.

            On delivery from SSAB the round bars meet the following specifications:

            • Free from mill scale
            • Not repair welded

            Delivery requirements can be found in SSAB’s brochure Toolox® Guarantees or at www.toolox.com.


            Recommendations and instructions

            pdf 384 Kb
            Toolox® in engineering applications
            pdf 783 Kb
            Machining recommendations for Toolox®

            Used for

            • Tooling & Engineering
            • High temperatures (up to 590°C)

            Available standard

            • EN10060

            High-strength engineering tool steel

            The new generation of tool steel.