COR-TEN® A, cold rolled

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    With its anti-corrosive properties, COR-TEN® minimizes the need for maintenance and corrosion-prevention treatment, contributing significantly to low maintenance costs throughout the product lifecycle. In addition to low maintenance costs, the reduced need for corrosion prevention means less use of paint and solvents, making COR-TEN® an environmental friendly choice of steel.

    Typical applications are structural components for buildings, transmission poles, bridges and many others.

    Dimension Range

    COR-TEN® A cold rolled is available in thicknesses of 0.50-3.00 mm and widths up to 1530 mm as coils, slit coils and as cut to length in lengths up to 8.5 meters.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Yield strength ReL
      (min MPa)
      Tensile strength Rm
      (min MPa)
      Elongation A80
      (min %)
      Min. inner bending radius for a 90° bend
      (x t)
      310 450 22 0.5
      Compare parameters

      Select one parameter to compare

      Comparison

        Tensile testing is carried out transverse to the rolling.

        If the yield point is not pronounced, the values apply to the 0.2% proof strength Rp0.2. If the yield point is pronounced, the values apply to the lower yield point (ReL).

        Chemical Composition (heat analysis)

        Hide/Show specific columns Edit
        Select columns to display
          C
          (max %)
          Si
          (%)
          Mn
          (%)
          P
          (%)
          S
          (max %)
          Al
          (%)
          Cu
          (%)
          Cr
          (%)
          Ni
          (max %)
          0.12 0.25 - 0.75 0.20 - 0.50 0.07 - 0.15 0.03 0.015 - 0.06 0.25 - 0.55 0.50 - 1.25 0.65
          Compare parameters

          Select one parameter to compare

          Comparison

            Tolerances

            COR-TEN® A in cold rolled condition is supplied with thickness and width tolerances in accordance to EN 10131. More narrow thickness tolerances are available on request.

            Cut to length are supplied with length tolerances in accordance to EN 10131.

            Delivery Conditions

            Cold rolled.

            Fabrication and Other Recommendations

            COR-TEN® A has extra corrosion resistance with good formability, thoughness and weldability.

            COR-TEN® is an internationally registered trademark of United States Steel Corporation.

            For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

            Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

            Contact Information

            www.ssab.com/contact