Strenx performance steel
Strenx performance steel

Strenx® 1100 E/F

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    Show specs in Metric Imperial

    General Product Description

    Strenx® 1100 E/F is a structural steel with a high yield strength at a minimum of 1100 MPa.

    Typical applications include demanding load-bearing structures. Despite its strength, the material is surprisingly easy to weld and bend.

    Benefits include:

    • Superior bendability and surface quality
    • Weldability with excellent HAZ strength and toughness
    • Exceptional consistency within a plate guaranteed by close tolerances
    • High impact toughness which provides for good resistance to fractures

    Dimension Range

     Strenx® 1100 E/F is available in plate thicknesses of 4.0 – 40.0 mm. Strenx® 1100 is available in widths up to 3200 mm and lengths up to 14630 mm depending on thickness. More detailed information on dimensions is provided in the dimension program.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mminches)
      Yield strength Rp0.2
      (min MPaksi)
      Tensile strength Rm
      (MPaksi)
      Elongation A5
      (min %)
      4.0 - 4.90.157 - 0.193 1100160 1250 - 1550181 - 224 8
      5.0 - 40.00.197 - 1.575 1100160 1250 - 1550181 - 224 10
      Compare parameters

      Select one parameter to compare

      Comparison

        For transverse test pieces.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Product Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          Strenx® 1100 E 27 J / -40 °C
          Strenx® 1100 F 27 J / -60 °C
          Compare parameters

          Select one parameter to compare

          Comparison

            Product
            Strenx® 1100 E
            Min impact energy for transversal testing,
            Charpy V 10x10 mm test specimen 1)
            27 J / -40 °C
            Product
            Strenx® 1100 F
            Min impact energy for transversal testing,
            Charpy V 10x10 mm test specimen 1)
            27 J / -60 °C

            1) Unless otherwise agreed, transverse impact testing according to EN 10025-6 option 30 will apply. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).

            Chemical Composition (ladle analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C *)
              (max %)
              Si *)
              (max %)
              Mn*)
              (max %)
              P
              (max %)
              S
              (max %)
              Cr*)
              (max %)
              Cu*)
              (max %)
              Ni*)
              (max %)
              Mo*)
              (max %)
              B*)
              (max %)
              0.21 0.50 1.40 0.020 0.005 0.80 0.30 3.0 0.70 0.005
              Compare parameters

              Select one parameter to compare

              Comparison

                The steel is grain refined. *) Intentional alloying elements.

                Carbon Equivalent CET(CEV)

                Hide/Show specific columns Edit
                Select columns to display
                  Thickness (mminches) 4.0 - 4.90.157 - 0.193 5.0 - 7.90.197 - 0.311 8.0 - 14.90.315 - 0.587 15.0 - 40.00.591 - 1.575
                  Strenx® 1100 E Max CET(CEV) 0.37 (0.57) 0.38 (0.58) 0.39 (0.62) 0.42 (0.73)
                  Strenx® 1100 F Max CET(CEV) 0.40 (0.70) 0.40 (0.70) 0.42 (0.73)
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    CET and CEV formula

                    Tolerances

                    More details are given in SSAB’s brochure Strenx® Guarantees.

                    Thickness

                    Tolerances according to Strenx® Thickness Guarantees.

                    Strenx® Guarantees meet the requirements of EN 10029 Class A, but offers narrower tolerances.

                    Length and Width

                    According to SSAB’s dimension program. Tolerances conforms with EN 10 029. 

                    Shape

                    Tolerances according to EN 10029.

                    Flatness

                    Tolerances according to Strenx® Flatness Guarantee Class D, which are more narrow than EN 10029 Class N.

                    Surface Properties

                    According to EN 10163-2 Class A, Subclass 3.

                    Delivery Conditions

                    The delivery condition is Quenched and Tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement.

                    Delivery requirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

                    Fabrication and Other Recommendations

                    Welding, bending and machining

                    Recommendations are found in SSAB’s brochures at www.ssab.com or consult Tech Support.

                    Strenx® 1100 E/F has bending guarantees according to Strenx® Bending Guarantees Class C.

                    Strenx® 1100 E/F has obtained its mechanical properties by quenching and subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 200ºC.

                    Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.