Download data sheet
Nova color coated steel from SSAB is available in regular and matt finishes.
Nova color coated steel is used in profiled roofs and roof fittings. It offers a coating thickness that is optimized for wear and weather resistance and has greater durability than standard polyester when exposed to people walking on the roof and other roof stresses.
The reverse side of the sheet is painted with a two-layer grey backside coating.
Nova complies with current REACH regulations and is fully free of chromates.
SSAB’s color coated steels are all manufactured according to EN 10169.
|Minimum inner bending radius||1 x sheet thickness||1 x sheet thickness|
|Scratch resistance||35 N||35 N|
|Lowest forming temperature||-10 °C||-10 °C|
|UV radiation resistance||RUV3||RUV3|
|Corrosion resistance 1)||RC5||RC5|
|Stain resistance||Very good||Very good|
|Highest operating temperature||100 °C||100 °C|
|Fire classification, EN 13501-1||A2 s2 d0||A2 s2 d0|
|Coating thickness, nominal (primer + top coat)||50 µm||50 µm|
|Steel designation||FAP,S280GD, S320GD, S350GD, DX52D 2)||FAP,S280GD, S320GD, S350GD, DX52D 2)|
|Zinc coating||275 g/m2||275 g/m2|
|Min steel thickness 3)||0.50 mm||0.50 mm|
|Steel width 3)||1000 - 1500 mm||1000 - 1500 mm|
1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.
2) FAP fulfills the requirements of EN 10346 DX52D.
3) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.
Below are the colors currently available. Other colors can be agreed upon separately.
Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.
RR20 / SS0005
RR21 / SS0011
RR22 / SS0554
RR23 / SS0036
Nordic Night Black
RR33 / SS0015
RR32 / SS0387
RR29 / SS0758
RR7H1 / SS6012
Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.
|Nominal Coating Thickness (primer + top coat)||12 µm|
|Corrosion Resistance||Min CPI3|
For easy material identification the reverse side of the sheet is stamped with the SSAB logo and the product name. The production year is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.