SSAB Boron 22

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

SSAB Boron 22 is steel for quench- and press hardening. The degree of hardness and toughness that can be achieved after heat-treatment will provide the final products with wear- and shock resistance properties that assure longer lifetime.

Dimension Range

SSAB Boron 22 is available in thickness range 0.70-80.00 mm and widths up to 1800 mm as coils, slit coils and CTL and 3300 mm as plate. Lengths up to 16 meters as cut to length.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Condition Typical yield strength
    (MPa), not guaranteed
    Typical tensile strength
    (MPa), not guaranteed
    Typical Elongation A (%),
    not guaranteed
    Typical Hardness
    (HRC), not guaranteed
    Typical hardness
    (HBW), not guaranteed
    Cold rolled annealed 350 500 27 165
    Cold rolled water quenched 1580 47 470
    Cold rolled oil quenched 1400 45 415
    Hot rolled 400 600 22 170
    Hot rolled annealed 350 530 25 165
    Hot rolled water quenched 1080 1500 10 47 470
    Hot rolled oil quenched 920 1170 11 44 407
    Compare parameters

    Select one parameter to compare

    Comparison

      Bending radius

      Minimum bending radius of hot rolled strip products is 2 x sheet thickness. A tighter bending radius, 1 x sheet thickness, can be guaranteed for the annealed strip products.

      Minimum bending radius of hot rolled SSAB Boron 22 heavy plate is 3 x plate thickness up to 16 mm thickness. For bending instructions of thicker plates, please contact SSAB’s Tech Support.

      Material Testing

      A test certificate according to EN 10204/3.1 (chemical composition only) is part of the delivery.

      A test certificate according to EN 10204/3.1 (with mechanical test) can be provided by special agreement only.

      Chemical Composition (heat analysis)

      Hide/Show specific columns Edit
      Select columns to display
        Condition C
        (%)
        Si
        (%)
        Mn
        (%)
        S
        (max %)
        P
        (max %)
        Cr
        (%)
        B
        (%)
        Cold rolled 0.20 - 0.25 0.10 - 0.40 1.10 - 1.40 0.010 0.020 0.10 - 0.30 0.0008 - 0.0050
        Hot rolled strip 0.20 - 0.25 0.10 - 0.30 1.10 - 1.30 0.010 0.020 0.10 - 0.40 0.0008 - 0.0050
        Hot rolled plate 0.20 - 0.26 0.10 - 0.40 1.10 - 1.30 0.010 0.020 0.20 - 0.50 0.0008 - 0.0050
        Compare parameters

        Select one parameter to compare

        Comparison

          The steel is grain refined.

          Carbon Equivalent CEV

          Hide/Show specific columns Edit
          Select columns to display
            Condition Hot rolled strip Hot rolled plate
            Typical CEV (%) 0.47 0.50
            Compare parameters

            Select one parameter to compare

            Comparison

              Tolerances

              SSAB Boron steels are delivered with SSAB Boron tolerances which meet and exceed the requirements in corresponding EN standards. Tighter tolerances are available on request.

              Thickness

              Cold rolled coils and sheet products: according to EN 10131. Tighter tolerances are available on request.

              Hot rolled coils and sheet products: according to SSAB Boron thickness tolerances that exceed EN 10051 and correspond to 2/3 of EN 10051 as default value.

              Hot rolled plate products: are delivered with tolerances that correspond to 3/4 of EN 10029 as default value.

              Length and Width

              Cold rolled coils and sheet products: according to EN 10131. Tighter tolerances are available on request.

              Hot rolled coils and sheets with mill edges: SSAB Boron width tolerances are corresponding to -0/+20 mm.

              Hot rolled coils and sheets with cut edges: SSAB Boron width tolerances are corresponding to -0/+2 mm.

              Hot rolled plate products: width tolerance -0/+4-10 mm depending on the thickness. Length tolerance -0/+15-75 mm depending on length.

              Shape

              Hot rolled strip: According to EN 10051. Narrower tolerances are available on request.

              Hot rolled plate: According to EN 10029

              Flatness

              Hot rolled sheets: SSAB Boron tolerances guarantee a maximum flatness deviation of 6 mm/m in addition to the EN 10051 flatness requirements. Flatness guarantees only apply for cut to length sheets.

              Hot rolled plate products: Maximum flatness deviation 6 mm/m.

              Surface Properties

              Hot rolled strip products and hot rolled plate products: According to EN 10163-2 Class A, Subclass 3.

              Delivery Conditions

              Cold rolled coils and sheets are delivered in annealed condition.

              Hot rolled coils and sheets are delivered in as-rolled or by separate agreement annealed condition.

              Heavy plates are as-rolled.

              Surface Condition

              Cold rolled products are available with oiled or dry surface.

              Hot rolled strip products are available in non-pickled, pickled dry or pickled & oiled condition.

              Heavy plates are available in as rolled, shot-blasted or shot-blasted & primed condition.

              Fabrication and Other Recommendations

              For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

              Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

              Contact Information

              www.ssab.com/contact