TRIWA sustainable watch – first consumer product to benefit from SSAB's fossil-free steel powder
TRIWA sustainable watch – first consumer product to benefit from SSAB's fossil-free steel powder

Sustainable watch supports steel industry transformation

Swedish watchmaker TRIWA believes it’s time for a change. That’s why it has launched the first-ever consumer product made from SSAB’s fossil-free steel powder.

The new, ultra-exclusive “Time for Decarbonization” watch has made TRIWA the first consumer-facing company to utilize SSAB’s new fossil-free steel powder. This is not a coincidence, says Ludvig Scheja, cofounder, and Creative Director at TRIWA.

“With our industry's tradition of working with steel, it feels extremely exciting to be part of this transformation of the steel industry,” says Scheja. “SSAB is at the forefront with the steel powder, produced using HYBRIT® technology, for the watch and we’re very proud to have created this symbol of change together with them. A timepiece from Sweden with a solution for an industry in need of transformation.”

What is steel powder?

Steel powder is – as the name suggests – steel that has been turned into powder. It has been around since the 1920s, although it really started to gain momentum after World War II. Initially used to make engines through press and sintering, steel powder became a hot topic in the last decade as 3D printing, or additive manufacturing, started to take off.

TRIWA´s watch case is made using a method called Metal Injection Moulding (MIM). In MIM, fine metal powder is blended with a binder material to make what is known as a feedstock, which is then shaped and solidified through injection molding. This allows complex, high-volume parts to be shaped in one step.

“We worked closely with TRIWA to produce a fossil-free steel powder to suit the MIM method,” says Fredrik Mikaelsson, Product Manager Powder at SSAB Special Steel. “The powder is even finer in terms of its particle size distribution than the steel powder we normally make.”

The major advantage of additive manufacturing is that it is more resource efficient, using a smaller amount of material than other methods and producing significantly less waste. It also makes it possible to create a lighter end-product that is more energy efficient.

As for the particle size distribution (PSD), this is important because it needs to be carefully adapted to the type of manufacturing process. The right PSD results in better process stability, which in turn, leads to enhanced quality and yield.

As Fredrik Mikaelsson explains, an additive manufacturing process like MIM or 3D printing places strict demands on the characteristics of the powder: “For example, we have very specific requirements when it comes to roundness, particle size distribution, to make sure the powder is adapted to the demands of each individual process and the unique properties of the application.”


How was the sustainable watch made?

Ludvig Scheja, Creative Director at TRIWA, explains that, once the design was set, a metal injection mold was made, into which the fossil-free steel powder was inserted and formed under tremendous pressure. The watch was then assembled with its dial, crown, movement and hands.

Going forward, TRIWA hopes to be able to incorporate fossil-free steel into more parts.

“Since steel is the most commonly used material in the industry and also the heaviest part of the product, this could be a game-changer,” says Scheja, adding that, given his company’s aim to be carbon neutral before 2026, it still needs a way to make the core fossil free.

“That’s when we’ll show the rest of the industry it’s possible,” he adds.

Fossil-free steel powder even more sustainable

“Steel powder already supports more sustainable manufacturing, because we use less of it and produce a lighter product that, in turn, uses less energy,” says Mikaelsson, who explains that when it comes to making small, complex parts, a large section of metal is typically worked down into a smaller piece. It is therefore not unusual for up to 50 to 75 percent of the original metal to be lost as waste during traditional manufacturing. This is not the case in additive manufacturing, where only the metal needed for the powder is used.

“Once we add fossil-free steel to a process that is already so much more resource efficient, we can really start talking about significant environmental gains,” he adds.

Since steel is the most commonly used material in the industry and also the heaviest part of the product, this could be a game-changer.

Ludvig Scheja, TRIWA

How is fossil-free steel powder made?

In the case of the TRIWA watch, the fossil-free steel used for the watch case was turned into powder using a process called gas atomization. And, like all steel, fossil-free steel powder is fully recyclable.

“Fossil-free steel powder has huge potential as a manufacturing material – especially for companies looking to improve their sustainability profile,” Mikaelsson concludes. “For example, it could be used for applications like manifolds, automotive parts or conformal cooling tools.”

Sustainable watch

In 2020, TRIWA calculated the carbon footprint of all its products and identified steel as the biggest polluter. Then it discovered fossil-free steel from SSAB. Made using fossil-free steel powder from SSAB, Time for Decarbonization comes in two versions, automatic or quartz movement. The dial color scheme and the oversized hour markers and hands are inspired by SSAB’s steel production.

Read more

steel powder

SSAB steel powder adds strength to additive manufacturing

The properties of high-strength steel can now be transferred into any complex shape. Additive manufacturing (AM) with steel powder from SSAB will give new opportunities for the design and production of steel components with high strength, impact toughness and hardness.
watches from triwa

SSAB and TRIWA present the world's first consumer product made using fossil-free steel – a watch

The unique watch, named Time for Decarbonization, has been created using fossil-free steel powder.