Duroxite® overlay welding consumables for production and maintenance

Duroxite® welding consumables come as both wire and electrodes for a variety of welding needs. They are used for production of overlay parts, maintenance and repair work.

Flux cored open arc wires for hardfacing of overlay products

A photo of two spools of Duroxite welding wire

Duroxite® 100 Wire for sliding wear

Duroxite® 100 Wire is used for hardfacing of equipment operating in sliding wear environments. The weld deposit contains abrasion-resistant materials composed of a high proportion of extremely hard primary M7C3 chromium-rich carbides.

A photo of two spools of Duroxite welding wire

Duroxite® 200 Wire for severe sliding wear

Duroxite® 200 Wire is targeted at severe sliding wear environments. The highly resistant hardfacing layer contains hard complex carbides in a tough matrix. It performs exceptionally well when exposed to both fine and coarse abrasive materials.

A welder in welding helmet holds a welding handle for Duroxite stick electrodes

Overlay wire and electrode for all-position (AP) welding

The basic welding positions are flat, horizontal, vertical and overhead, with overhead welding being the most difficult. These positions are of course ideal simplifications. One often must deal with a more complicated mix of welding positions. Both Duroxite® AP Wire and Duroxite AP Electrode are designed to give high quality welds in all positions.

A close-up photo of a spool of Duroxite AP welding wire

Duroxite® AP Wire

Duroxite® AP Wire gives a hardfacing layer with high resistance against metal-to-metal wear, metal-to-earth wear, impact and high abrasion environments. It can be deposited on carbon, low alloy, and manganese steels.

A photo of Duroxite AP stick electrodes

Duroxite® AP Electrode

Duroxite® AP Electrode is a solid cored electrode with an extruded coating containing the alloy elements. It is designed for components experiencing metal-to-metal wear, metal-to-earth wear, impact and high abrasion. Duroxite® AP Electrode can be deposited on carbon, low alloy, and manganese steels.

A close-up photo of a spool of Duroxite Cr-Zero welding wire

Duroxite® Cr-Zero Wire protects against chromium smoke

Duroxite® Cr-Zero Wire is suitable for overlay welding situations where it is difficult to protect the welder from the emission of hexavalent chromium smoke. The deposited overlay contains boron carbides with a wear resistance and hardness equal to or greater than conventional chromium carbide deposits.

180