Coil of AHSS
Coil of AHSS

Advanced High-Strength Steels (AHSS) definitions, nomenclature and evolving categories

Advanced high-strength steels in cars are grades that meet a minimum tensile strength of 440 MPa (64 ksi or 64,000 psi), according to the WorldAutoSteel, the automotive industry association of AHSS steel manufacturers. To greatly oversimplify, all AHSS steels achieve their high strength by steel producers precisely controlling their chemistries and their heating and cooling rates.

Types of advanced high-strength steels

Some of the most popular metallurgical types of steels capable of achieving AHSS tensile strengths include:

AHSS nomenclature

The original nomenclature for advanced high-strength steels included both their metallurgical type, such as DP for dual phase, and their minimum tensile strength (in MPa). For example, “DP500.”

Note that steelmakers typically group their AHSS products by their approximate minimum tensile strengths, frequently “rounding up” the strength value for brevity. To determine a specific grade’s actual value, look at its full steel grade name: for example, “CR290Y490T-DP” describes a DP500 steel with an actual minimum tensile strength of 490 MPa (the “490T”), as well as its minimum yield strength of 290 MPa (the “290Y”).

In any case, automakers buy steels to meet either their own custom AHSS specifications, or specific national or international AHSS standards, and they clearly delineate the AHSS properties, including the minimum yield and tensile strengths.

Also note that AHSS steels’ predecessor – high-strength, low-alloy steels (or HSLA) – used designations, for example HSLA 430, that referenced the grade’s minimum yield strength and not its tensile strength.

An additional nomenclature consideration is that HSLA steels (which are sometimes further abbreviated to just “LA” in their product names) have progressed to the point where their minimum tensile strengths exceed the 440 MPa level, qualifying them for the AHSS designation.

Docol product families
* HSLA/HE steels are named after yield strength

Looking for AHSS steels for lifts, trailers and agricultural equipment?

Docol® AHSS/UHSS steels are especially developed for the automotive industry. But if you’re designing lifts, trailers, agricultural or other similar equipment requiring advanced high strength structural steel, check out Strenx® performance steel from SSAB.

OEM specific

Customized advanced and ultra-high strength steels for your specific automotive applications.

The ongoing evolution of AHSS designations

As steel manufacturers use increasingly sophisticated processes to develop new AHSS steels, including 3rd generation AHSS steels, the old metallurgical categories don’t always fit.

For example, some new grades exhibit attributes from more than one of the traditional metallurgical categories. Or the new steels don’t fit neatly into the current international standards’ definitions of metallurgical categories.

To counter this, some steelmakers are coming up with new AHSS designations based on AHSS properties such as formability or usability, such as High Edge (HE) ductility or Dual Phase with High Formability.

Another change in AHSS terminology is the increased use of the phase “ultra-high strength steel”. UHSS has become useful shorthand to mean AHSS steels that have (depending on who you’re speaking to) two or three times higher minimum tensile strength levels than the original AHSS level of 440 MPa.

Make products easier

To learn more about AHSS, UHSS, and their automotive applications

Visit our UHSS page to learn about the highest strength steels, as well as how AHSS/UHSS steels in general can make your vehicles stronger, lighter, safer, and more sustainable.

Like how Dual Phase is different from Dual Phase with High Formability? We would be happy to help, starting with the end-goals for your specific automotive AHSS structural or body-in-white application.

Do you have questions about Docol® AHSS designations?

Related content

180