Strenx performance steel
Strenx performance steel

Strenx® 1100MC

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page
Show specs in Metric Imperial

General Product Description

The high-strength structural steel at 1100 MPa

Strenx® 1100MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 1100 MPa for stronger and lighter structures.

These cut-to-length sheets feature excellent thickness accuracy and surface quality in relation to strength level, providing an outstanding finish to the final products. Typical applications include a wide range of parts and components such as demanding load-bearing structures. 

Dimension Range

Strenx® 1100MC is available as cut to length sheets with mill edge in thicknesses of 3.00 - 8.00 mm, widths up to 1700 mm and lengths up to 16 meters.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Thickness
    (mmin)
    Yield strength ReH 1)
    (min MPaksi)
    Tensile strength Rm
    (MPaksi)
    Elongation A5
    (min %)
    Min. inner bending radius for a 90° bend 2)
    3.00 - 8.000.118 - 0.315 1100160 1250 - 1450181 - 210 7 4.0 x t
    Compare parameters

    Select one parameter to compare

    Comparison

      The mechanical properties are tested in the longitudinal direction.

      1) If ReH is not applicable then Rp0.2 is used.

      2) For both longitudinal and transverse direction.

      Impact Properties

      Hide/Show specific columns Edit
      Select columns to display
        Product Min. impact energy for longitudinal testing,
        Charpy V 10x10 mm test specimen 1)
        Strenx® 1100MC 27 J / -40 °C20 ft-lbs / -40 °F
        Compare parameters

        Select one parameter to compare

        Comparison

          Product
          Strenx® 1100MC
          Min. impact energy for longitudinal testing,
          Charpy V 10x10 mm test specimen 1)
          27 J / -40 °C20 ft-lbs / -40 °F

          1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

          Chemical Composition (ladle analysis)

          Hide/Show specific columns Edit
          Select columns to display
            C *)
            (max %)
            Si *)
            (max %)
            Mn*)
            (max %)
            P
            (max %)
            S
            (max %)
            Al
            (min %)
            0.15 0.50 1.80 0.020 0.005 0.015
            Compare parameters

            Select one parameter to compare

            Comparison

              The steel is grain refined.

              In addition Nb, V, Cr, Mo, B and Ti may be used.

              Carbon Equivalent CET(CEV)

              Hide/Show specific columns Edit
              Select columns to display
                Thickness (mmin) 3.00 - 8.000.118 - 0.315
                Typ CET(CEV) 0.33 (0.56)
                Compare parameters

                Select one parameter to compare

                Comparison

                  Thickness (mmin)
                  Typ CET(CEV)
                  3.00 - 8.000.118 - 0.315
                  0.33 (0.56)

                  Tolerances

                  More details are given in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

                  Thickness

                  Tolerances according to Strenx® Thickness Guarantee.

                  Strenx® Guarantees offer considerably narrower thickness tolerances compared to EN 10051. 

                  Length and Width

                  Width and length tolerances according to SSAB standard.

                  SSAB standard offer narrower width and length tolerances compared to EN 10051.

                  Length tolerances only apply for cut to length sheets.

                  Shape

                  Tolerances according to EN 10051. Narrower tolerances according to the SSAB standard are available on request.

                  Flatness

                  Tolerances according to Strenx® Flatness Guarantee Class A.

                  Strenx® Flatness Guarantee offer narrower tolerances compared to EN 10051.

                  Flatness guarantees only apply for cut to length sheets. 

                  Surface Properties

                  According to EN 10163-2 Class A, Subclass 3.

                  Delivery Conditions

                  Thermomechanically Rolled. Strenx® 1100 MC is available in as rolled surface condition.

                  Delivery requirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

                  Fabrication and Other Recommendations

                  Welding, bending and machining

                  Strenx® 1100MC has good welding, cold forming and cutting performance.

                  Strenx® 1100MC is not suited for applications requiring hot working or heat treatments at temperatures above 200°C since the material then may lose its guaranteed properties.

                  For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                  Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.