Docol® 550LA high strength low alloyMore about high strength low alloy steel
Download data sheet
Download data sheet
The Docol 550LA steels are high-strength low-alloy steels that offer consistent properties for modern, rapid production methods. Typical applications include bent profiles. Docol HR550LA-UC can after agreement be adapted and delivered as dual certified with S550MC according to EN 10149-2.
Hot rolled / UC: thickness 2.00-6.00 mm, width up to 1600 mm.
Hot rolled / GI: thickness 2.00-5.00 mm, width up to 1500 mm.
Slit strip and cut to length sheets are available upon request.
Grade and coating specific restrictions on available dimensions may occur.
||Yield strength Rp0.2
|Tensile strength Rm
|Elongation A80 1)
|Elongation A5 3)
|Min. inner bending radius for a 90° bend 4)|
|Docol HR550LA||VDA 239-100||UC, GI*||L||550 - 670||610 - 750||12 2)||16 2)||1.0 x t|
* Available upon request.
1) A80 value applies for thicknesses < 3.00 mm.
2) For GI coatings the minimum elongation value is reduced by 1 unit.
3) A5 value applies for thicknesses ≥ 3.00 mm.
4) In some cases tight bending radius may cause micro-cracking of the coating in the bend area. Where design permits, users are encouraged to employ larger radius.
|Docol HR550LA||UC||0.12||0.60||1.80||0.025||0.025||From 0.015||0.15||0.09||0.20|
Hot rolled (UC): Tolerances in accordance to EN 10051.
Hot-dip galvanized (GI): Tolerances in accordance to EN 10143.
Customized dimensional and shape tolerances are available upon request.
The metal coating options for Docol products include:
Hot-dip zinc coating (GI) consists almost entirely of zinc (>99%). It is lead free, resulting in a small zinc spangle size. The coating provides good corrosion protection.
Grade specific availability of metal coatings for Docol products is given in the Mechanical properties table (Coating).
|Coating type||Coating class||Standard||Closest in EN 10346, informative||Coating mass per side, single spot test (g/m2)||Thickness per side informative (µm)|
|GI||40/40||VDA 239-100||Z100||40 - 60 1)||5.6 - 8.5|
|GI||50/50||VDA 239-100||—||50 - 70 1)||7.0 - 9.9|
|GI||60/60||VDA 239-100||Z140||60 - 90||8.5 - 12.7|
|GI||70/70||VDA 239-100||—||70 - 100||9.9 - 14.1|
|GI||85/85||VDA 239-100||—||85 - 115||12.0 - 16.2|
|GI||115/115||VDA 239-100||Z275||115 - 155||16.2 - 21.8|
Docol metal coated products are available with surface quality for unexposed applications.
In addition to these coating masses, OEM specific coatings are available upon request.
1) For hot-dipped (GI, ZA, GA) hot rolled (HR) grades, the coating mass tolerance is increased to 30 g/m² by increasing the upper limit.
Uncoated (UC): available as oiled.
Hot-dip galvanized (GI): available as oiled and/or chemically passivated.
All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.