Docol® S900MC high strength low alloy
General Product Description
The high-strength structural steel Docol S900MC is a hot-rolled steel made for cold forming, with a minimum yield strength of 900 MPa. Docol S900MC meets or exceeds the requirements of S900MC in EN 10149-2. Docol S900MC is provided as cut-to-length sheets with excellent thickness accuracy and surface quality. Typical applications include a wide range of components and parts for lighter transport solutions.
Dimension Range
Docol S900MC is available as cut to length sheets with mill edge in thicknesses of 3.00 - 10.00 mm, widths up to 1600 mm and lengths up to 13 meters.
Mechanical Properties
(mmin)
(mmin)
(min MPa)
(MPa)
(min %)
(x t)
(mmin)
(mmin)
(min MPa)
(MPa)
(min %)
(x t)
The mechanical properties are tested in the longitudinal direction.
1) If ReH is not applicable then Rp0.2 is used.
2) For both longitudinal and transverse direction.
Impact Properties
Charpy V 10x10 mm test specimen 1)
1) Impact testing according to EN 10149-2 ( -20 °C /minimum 40J) is available if specified at the time of order.
Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 5mm. The specified minimum value corresponds to a full-size specimen.
Chemical Composition (heat analysis)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
1) Sum of Nb, V and Ti = max 0.22%.
The steel is grain refined.
Carbon Equivalent CET(CEV)
Tolerances
Hot rolled (UC): Tolerances in accordance to EN 10051.
Thickness tolerances 1/2 of EN 10051 category D.
Customized dimensional and shape tolerances are available upon request.
Surface Treatments
Uncoated (UC): available as rolled or pickled and oiled or pickled-dry. As pickled and oiled and pickled-dry up to 5mm thickness.
All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.
Delivery Conditions
Fabrication and Other Recommendations
Welding, bending and machining
Docol S900MC has good welding, cold forming and cutting performance.
Docol S900MC is a cold forming steel not suited for use at temperatures above 400°C since the material may then lose its guaranteed properties.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.
Docol® High Strength Low Alloy steel product offer
Docol® 420LA high strength low alloy
Visualizza prodottoDocol HR100XF
Visualizza prodottoDocol HR110XF
Visualizza prodottoDocol® S600MC high strength low alloy
Visualizza prodottoDocol® S650MC high strength low alloy
Visualizza prodottoDocol® S700MC high strength low alloy
Visualizza prodottoDocol® S900MC high strength low alloy
Visualizza prodottoDocol S960MC
Visualizza prodottoDocol® 460LA high strength low alloy
Visualizza prodottoDocol® 500LA high strength low alloy
Visualizza prodottoDocol® 550LA high strength low alloy
Visualizza prodottoDocol® 600LA high strength low alloy
Visualizza prodottoDocol® 650LA high strength low alloy
Visualizza prodottoDocol® 700LA high strength low alloy
Visualizza prodottoContenuti correlati
Stock di materiale di prova
Vuoi scoprire applicazioni automotive uniche nel loro genere, sperimentare nuovi metodi di produzione o creare componenti più leggeri che possano migliorare l'efficienza del carburante, la resistenza all'impatto dei veicoli e la sostenibilità?
Read more
Dati di formatura per gli acciai AHSS Docol®
Gli attuali clienti Docol® hanno accesso 24 ore su 24, 7 giorni su 7 ai dati di formatura necessari per aiutarli nella scelta e nella simulazione degli acciai altoresistenziali di nuova generazione per il settore automobilistico.
Read more