SSAB Weathering Tube 355WH

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    SSAB Weathering Tube 355WH is structural hollow section with anti-corrosive properties, which minimize the need for maintenance and corrosion- prevention treatment.

    It is available in circular, rectangular, square and special shapes. Customized shapes and other tailoring options are available upon request. It is typically used in advanced engineering and construction where corrosion resistance is important. It meets the standard requirements of EN 10219 and is CE marked.

    SSAB Weathering Tube 355WH is manufactured by cold forming and high frequency welding from clean, high quality environmentally friendly steel by modern and efficient tube lines.

    Dimension Range

    SSAB Weathering Tube 355WH is available in circular, square and rectangular shapes.

    Hide/Show specific columns Edit
    Select columns to display
      Shapes Dimensions
      Circular (mmin) 42.4 - 323.91.67 - 12.75
      Square (mmin) 40x40 - 300x300
      Rectangular (mmin) 50x30 - 400x200
      Wall thickness (mmin) 2.0 - 12.500.079 - 0.4921
      Mill length (mm) 6000/12 000 mm
      Compare parameters

      Select one parameter to compare

      Comparison

        Shapes
        Circular (mmin)
        Dimensions
        42.4 - 323.91.67 - 12.75
        Shapes
        Square (mmin)
        Dimensions
        40x40 - 300x300
        Shapes
        Rectangular (mmin)
        Dimensions
        50x30 - 400x200
        Shapes
        Wall thickness (mmin)
        Dimensions
        2.0 - 12.500.079 - 0.4921
        Shapes
        Mill length (mm)
        Dimensions
        6000/12 000 mm

        Other shapes, sizes and lengths are available upon request.

        Circular Dimensions

        Hide/Show specific columns Edit
        Select columns to display
          Outer diameter (mmin) 2.0 mm (kg/m) 2.5 mm (kg/m) 3.0 mm (kg/m) 4.0 mm (kg/m) 5.0 mm (kg/m) 6.0 mm (kg/m) 8.0 mm (kg/m) 10.0 mm (kg/m) 12.5 mm (kg/m)
          42.41.67 1.99 2.46 2.91 3.79
          48.31.90 2.28 2.82 3.35 4.37
          60.32.37 2.88 3.56 4.24 5.55 6.82
          76.13.00 3.65 4.54 5.41 7.11 8.77
          88.93.50 6.36 8.38 10.4 12.3
          101.64.000 7.29 9.63 11.9 14.2
          1084.25 7.77 10.3 12.7 15.1
          1144.49 8.23 10.9 13.5 16.0
          1275.00 9.17 12.1 15.0 17.9
          139.75.500 13.4 16.6 19.8 26.0 32.0
          168.36.626 16.2 20.1 24.0 31.6 39.0
          219.18.626 21.2 26.4 31.5 41.7 51.6 63.7
          27310.7 26.5 33.1 39.5 52.3 64.9 80.3
          323.912.75 39.3 47.0 62.3 77.4 96.0
          Compare parameters

          Select one parameter to compare

          Comparison

            Square Dimensions

            Hide/Show specific columns Edit
            Select columns to display
              Height x Width (mm) 2.0 mm (kg/m) 2.5 mm (kg/m) 3.0 mm (kg/m) 4.0 mm (kg/m) 5.0 mm (kg/m) 6.0 mm (kg/m) 8.0 mm (kg/m) 10.0 mm (kg/m) 12.5 mm (kg/m)
              40 x 40 2.31 2.82 3.30 4.20
              50 x 50 2.93 3.60 4.25 5.45 6.56
              60 x 60 3.56 4.39 5.19 6.71 8.13
              70 x 70 6.13 7.97 9.70
              80 x 80 7.07 9.22 11.3 13.2
              90 x 90 8.01 10.5 12.8 15.1
              100 x 100 8.96 11.7 14.4 17.0 21.4
              120 x 120 14.3 17.6 20.8 26.4 31.8
              140 x 140 16.8 20.7 24.5 31.4 38.1
              150 x 150 18.0 22.3 26.4 34.0 41.3 48.7
              160 x 160 19.3 23.8 28.3 36.5 44.4 52.6
              180 x 180 27.0 32.1 41.5 50.7 60.5
              200 x 200 30.1 35.8 46.5 57.0 68.3
              220 x 220 39.6 51.5 63.2 76.2
              250 x 250 45.2 59.1 72.7 88.0
              260 x 260 61.6 75.8 91.9
              300 x 300 54.7 71.6 88.4 108
              Compare parameters

              Select one parameter to compare

              Comparison

                Rectangular Dimensions

                Hide/Show specific columns Edit
                Select columns to display
                  Height x Width (mm) 2.0 mm (kg/m) 2.5 mm (kg/m) 3.0 mm (kg/m) 4.0 mm (kg/m) 5.0 mm (kg/m) 6.0 mm (kg/m) 8.0 mm (kg/m) 10.0 mm (kg/m) 12.5 mm (kg/m)
                  50 x 30 2.31 2.82 3.30 4.20
                  60 x 40 2.93 3.60 4.25 5.45 6.56
                  80 x 40 3.56 4.39 5.19 6.71 8.13
                  80 x 60 5.17 6.13 7.97 9.70
                  100 x 40 6.13 7.97 9.70
                  100 x 50 6.60 8.59 10.5 12.3
                  100 x 60 7.07 9.22 11.3 13.2
                  100 x 80 8.01 10.5 12.8 15.1
                  120 x 60 8.01 10.5 12.8 15.1
                  120 x 80 8.96 11.7 14.4 17.0
                  140 x 60 11.7 14.4 17.0
                  140 x 80 13.0 16.0 18.9
                  150 x 50 11.7 14.4 17.0
                  150 x 100 14.9 18.3 21.7 27.7 33.4
                  160 x 70 13.6 16.8 19.8 25.2
                  160 x 80 14.3 17.6 20.8 26.4 31.8
                  180 x 100 16.8 20.7 24.5 31.4 38.1
                  200 x 100 18.0 22.3 26.4 34.0 41.3 48.7
                  200 x 120 23.8 28.3 36.5 44.4 52.6
                  250 x 100 26.18 31.11 40.23 49.11
                  250 x 150 30.1 35.8 46.5 57.0 68.3
                  260 x 180 39.6 51.5 63.2
                  300 x 100 30.1 35.8 46.5 57.0 68.3
                  300 x 150 40.5 52.8 64.8 78.1
                  300 x 200 45.2 59.1 72.7 88.0
                  400 x 200 54.7 71.6 88.4 108
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Mechanical Properties

                    Hide/Show specific columns Edit
                    Select columns to display
                      Yield strength Rp0.2
                      (min MPa)
                      Tensile strength Rm
                      (MPa)
                      Elongation A5 1)
                      (min %)
                      Charpy-V -20°C 10x10 mm test specimen 2)
                      (J)
                      355 470 - 630 20 27
                      Compare parameters

                      Select one parameter to compare

                      Comparison

                        Mechanical properties meet the requirements of S355J2WH, EN 10219.

                        The mechanical properties for rectangular hollow sections are tested by SSAB on the longer side of the cross section.

                        1) The hollow sections with D/T < 15 (round) or (B + H)/2T < 12,5 (rectangular and square), the minimum value of elongation is reduced by 2.

                        2) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

                        Chemical Composition (ladle analysis)

                        Hide/Show specific columns Edit
                        Select columns to display
                          C
                          (max %)
                          Si
                          (max %)
                          Mn
                          (%)
                          P
                          (max %)
                          S
                          (max %)
                          Altot
                          (min %)
                          Cr
                          (%)
                          Cu
                          (%)
                          0.12 0.50 0.50 - 1.50 0.020 1) 0.010 1) 0.020 0.40 - 0.80 0.25 - 0.55
                          Compare parameters

                          Select one parameter to compare

                          Comparison