Product & services Brands & products Armox Product offer and datasheets Armox Armox Advance

Armox® Advance

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data.
On this page

    General Product Description

    SSAB’s toughest, ultra-hard protection plate.

    Armox® Advance is SSAB’s toughest appliqué (add-on) protection plate for use where component weight reduction is essential. It is available in thicknesses between 4.0 and 7.9 mm, and not intended for further heat treatment.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)      		 Hardness
      (HRC)
      4.0 - 7.90.157 - 0.311 58 - 63
      Compare parameters

      Select one parameter to compare

      Comparison

        Thickness
        (mmin)
        4.0 - 7.90.157 - 0.311
        Hardness
        (HRC)
        58 - 63

         

        Mechanical Testing

        Rockwell hardness test EN ISO 6508-1. Each treatment individual.

        Ultrasonic testing

        According to EN 10160 Class E3S3.

        Chemical Composition (ladle analysis)

        Hide/Show specific columns Edit
        Select columns to display
          C *)
          (max %)          		 Si *)
          (max %)          		 Mn*)
          (max %)          		 P
          (max %)          		 S
          (max %)          		 Cr*)
          (max %)          		 Ni*)
          (max %)          		 Mo*)
          (max %)          		 B*)
          (max %)
          0.48 0.70 1.00 0.010 0.003 1.5 3.0 0.70 0.005
          Compare parameters

          Select one parameter to compare

          Comparison

            The steel is grain-refined. *) Intentional alloying elements.

            Tolerances

            More details are given in SSAB´s brochure Armox® Guarantees or on www.ssab.com.

            Thickness

            Hide/Show specific columns Edit
            Select columns to display
              Thickness
              (mmin)              		 Tolerance
              (mmin)
              4.0 - 7.90.157 - 0.311 - 0.0 / + 0.6- 0.0 / + 0.0236
              Compare parameters

              Select one parameter to compare

              Comparison

                Thickness
                (mmin)
                4.0 - 7.90.157 - 0.311
                Tolerance
                (mmin)
                - 0.0 / + 0.6- 0.0 / + 0.0236

                Length and Width

                According to SSAB´s dimension program.

                • Tolerances conform to EN 10029 or to SSAB´s standard after agreement.
                • Dimensional tolerances for plate with mill edge according to special agreement. 

                Shape

                Tolerances according to EN 10029.

                Flatness

                Flatness tolerance for thicknesses between 4.0 – 6.9 mm are according to Armox® flatness guarantee, which are more restrictive than EN 10029 Class N (steel type L). For thicknesses between 7.0 – 7.9 mm, the maximum accepted flatness deviation is 8 mm/m.

                Surface Properties

                According to EN 10163-2 Class B, Subclass 3.

                Delivery Conditions

                The delivery condition is Q (Quenched).

                Deliveryrequirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com