Ramor® 600

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    The ballistic protection steel with extra-high hardness

    Ramor® 600 is a ballistic protection steel of extra-high hardness, nominal 600 HBW, available in thicknesses of 3.0 ‑6.0 mm (0.118‑0.236″).

    Ramor® 600 is available as cut-to-length sheet in thicknesses of 3.0 ‑ 6.0 mm (0.118‑0.236″). Delivered in quenched condition, Ramor® 600 is not intended for further heat treatment.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mm)
      Hardness
      (HBW)
      Ramor® 600 3.0 - 6.0 570 - 640
      Compare parameters

      Select one parameter to compare

      Comparison

        Mechanical Testing

        Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual/coil.

        Hardness is measured on a milled surface 0.3-2 mm below plate surface.

        Chemical Composition (ladle analysis)

        Hide/Show specific columns Edit
        Select columns to display
          C
          (max %)
          Si
          (max %)
          Mn
          (max %)
          P
          (max %)
          S
          (max %)
          Cr
          (max %)
          Ni
          (max %)
          Mo
          (max %)
          B
          (max %)
          0.40 0.70 1.5 0.015 0.010 1.50 2.50 0.80 0.005
          Compare parameters

          Select one parameter to compare

          Comparison

            The steel is grain-refined. Phosphorous and sulphur are not intentionally alloying elements.

            Tolerances

            More details are given on www.ssab.com.

            Thickness

            Hide/Show specific columns Edit
            Select columns to display
              Product Type Thickness
              (mm)
              Tolerance
              (mm)
              Sheet 3.00 - 4.00 - 0.0 / + 0.36
              Sheet 4.01 - 5.00 - 0.0 / + 0.40
              Sheet 5.01 - 6.00 - 0.0 / + 0.42
              Compare parameters

              Select one parameter to compare

              Comparison

                Length and Width

                Sheets are delivered with mill edges cut as standard.

                • Tolerances conform to EN 10 051 or to SSAB´s standard after agreement.

                Shape

                Tolerances according to EN 10051.

                Flatness

                Tolerances according to SSAB’s flatness tolerances which are more restrictive than EN 10051.

                Hide/Show specific columns Edit
                Select columns to display
                  Product Type 1000 ruler
                  (mm)
                  Sheet 6
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Product Type
                    Sheet
                    1000 ruler
                    (mm)
                    6

                    Surface Properties

                    According to EN 10163-2 Class B Subclass 3.

                    Delivery Conditions

                    Ramor is delivered in quenched condition.