GreenCoat Mica BT
Download data sheet
Download data sheet
GreenCoat Mica BT color coated steel is available in an exclusive, glittery matt textured finish. It uses a patented bio-based coating having Swedish rapeseed oil instead of traditional fossil oil in the paint, which is unique on the market. SSAB holds a worldwide patent for this coating technology (Bio-based Technology, BT).
GreenCoat Mica BT color coated steel offers a high level of durability for profiled roof tiles and profiles with high aesthetic demands. GreenCoat Mica BT possesses good gloss retention and color fastness and provides good protection against corrosion (RC5 class). The reverse side of the sheet is painted with a two-layer grey backside coating.
GreenCoat Mica BT complies with current REACH regulations and is fully chromate-free.
SSAB’s color coated steels are all manufactured according to EN 10169.
1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.
2) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.
Below are the colors currently available. Other colors can be agreed upon separately.
Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.
Colors
GreenCoat Mica BT
Goosewing Grey
RR2H5 / SS0461
Matt
Mountain Grey
RR23 / SS0036
Matt
Cliff Grey
RR288 / SS0455
Matt
Slate Grey
RR2H3 / SS0534
Matt
Nordic Night Black
RR33 / SS0015
Matt
Walnut Brown
RR32 / SS0387
Matt
Acorn Brown
RR827 / SS0434
Matt
Cottage Red
RR29 / SS0758
Matt
Brick Red
RR7F2 / SS0742
Matt
Red Clay
RR7G3 / SS0762
Matt
Silver Fir Green
RR5J3 / SS0975
Matt
To ensure tonal consistency of colors on a single exterior face, all material must come from the same production batch. Also the directionality of surfaces has to be consistent especially when sheets are cut to size.
Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.
For easy material identification the reverse side of the sheet is stamped with the GreenCoat logo and the product name. The production year is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.