Hardox® HiTuf

Get technical advice

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

The extra-high tough steel for structural wear parts

Hardox® HiTuf is an abrasion-resistant plate with guaranteed impact toughness. With a nominal hardness of 350 HBW, it’s a good choice for structural wear parts like thick cutting edges, demolition tools and rippers.

Dimension Range

Hardox® HiTuf is available in thicknesses of 40.0 - 160.0 mm. Hardox® HiTuf is available in widths up to 3350 mm and lengths up to 14630 mm. For thicknesses over 125 mm preferred width is 1650 mm. More detailed information on dimensions is provided in the dimension program.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Product Thickness
    (mmin)
    Hardness 1)
    (HBW)
    Typical yield strength
    (MPaksi), not guaranteed
    Hardox® HiTuf 40.0 - 160.01.575 - 6.299 310 - 370 850123
    Compare parameters

    Select one parameter to compare

    Comparison

      1) Brinell hardness, HBW, according to EN ISO 6506-1, on a milled surface 0.5 – 3 mm below surface for plate. At least one test specimen per heat and 40 tons.

      The nominal material thickness will not deviate more than ± 15 mm from that of the test specimen.

      Impact Properties

      Hide/Show specific columns Edit
      Select columns to display
        Product Transverse test, guaranteed impact energy,
        Charpy V 10x10 mm test specimen 1)
        Hardox® HiTuf 40 J / -40 °C29 ft-lbs / -40 °F
        Compare parameters

        Select one parameter to compare

        Comparison

          Product
          Hardox® HiTuf
          Transverse test, guaranteed impact energy,
          Charpy V 10x10 mm test specimen 1)
          40 J / -40 °C29 ft-lbs / -40 °F

          1) Impact testing according to ISO EN 148 per heat and thickness group. Average of three tests. Single value minimum 70% of specified average.

          Chemical Composition (heat analysis)

          Hide/Show specific columns Edit
          Select columns to display
            C *)
            (max %)
            Si *)
            (max %)
            Mn*)
            (max %)
            P
            (max %)
            S
            (max %)
            Cr*)
            (max %)
            Ni*)
            (max %)
            Mo*)
            (max %)
            B*)
            (max %)
            0.20 0.60 1.60 0.050 0.020 0.70 2.0 0.70 0.005
            Compare parameters

            Select one parameter to compare

            Comparison

              The steel is grain refined. *) Intentional alloying elements.

              Carbon Equivalent CET(CEV)

              Hide/Show specific columns Edit
              Select columns to display
                Thickness (mmin) 40.0 - 70.01.575 - 2.7560 70.1 - 160.02.760 - 6.299
                Max CET(CEV) 0.38 (0.56) 0.41 (0.67)
                Typ CET(CEV) 0.36 (0.55) 0.39 (0.64)
                Compare parameters

                Select one parameter to compare

                Comparison

                  Tolerances

                  More details are given in SSAB’s brochure Hardox® Guarantees.

                  Thickness

                  Tolerances according to Hardox® Thickness Guarantees.

                  Hardox® Guarantees meet the requirements of EN 10029 Class A, but offer more narrow tolerances.

                  Length and Width

                  According to SSAB’s dimension program. Tolerances conforms to EN 10029 or to SSAB’s standard after agreement.

                  Shape

                  Tolerances according to EN 10029.

                  Flatness

                  Tolerances according to Hardox® Flatness Guarantees Class C, which are more restrictive than EN 10029 class N.

                  Surface Properties

                  According to EN 10163-2 Class A, Subclass 1.

                  Delivery Conditions

                  The delivery condition is Quenched. The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement.

                  Delivery requirements can be found in SSAB’s brochure Hardox® Guarantees or www.ssab.com.

                  Fabrication and Other Recommendations

                  Welding, bending and machining

                  Recommendations can be found in SSABs brochures at www.hardox.com or consult Tech Support.

                  Hardox® HiTuf is not intend for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 450ºC .

                  Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.