Docol® 1100M martensitic

More about martensitic steel

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

자세히 알아보기

General Product Description

A martensitic steel with advanced high-tensile strength, Docol 1100M helps improve crashworthiness and ensure a lightweight design and cost-efficient production methods for the automotive industry. Docol is one of the strongest cold rolled advanced high-strength steels on the market and has become the material of choice for automotive applications such as side impact beams, bumpers and structural components.

Dimension Range

Cold rolled / UC: thickness 0.50-2.00 mm, width up to 1527 mm.

Cold rolled / EG: thickness 0.80-1.80 mm, width up to 1200 mm.

Slit strip and cut to length sheets are available upon request.

Grade and coating specific restrictions on available dimensions may occur.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Standard Coating Test direction
    Yield strength Rp0.2
    (MPa)
    Tensile strength Rm
    (MPa)
    Elongation A80
    (min %)
    Min. inner bending radius for a 90° bend
    Docol CR​860Y​1100T-​MS SSAB UC, EG L 860 - 1100 1100 - 1300 3 3.5 x t
    Compare parameters

    Select one parameter to compare

    Comparison

      The testing of mechanical properties of electrogalvanized products is conducted without coating.

      Chemical Composition (ladle analysis)

      Hide/Show specific columns Edit
      Select columns to display
        Coating C
        (max %)
        Si
        (max %)
        Mn
        (max %)
        P
        (max %)
        S
        (max %)
        Al
        (%)
        Nb+Ti
        (max %)
        Cr+Mo
        (max %)
        B
        (max %)
        Cu
        (max %)
        Docol CR​860Y​1100T-​MS UC, EG 0.13 0.40 1.90 0.020 0.010 From 0.010 0.10 1.00 0.010 0.20
        Compare parameters

        Select one parameter to compare

        Comparison

          Tolerances

          Cold rolled (UC, EG): Tolerances in accordance to EN 10131.

          Customized dimensional and shape tolerances are available upon request.

          The following improved flatness tolerances are available for cold rolled martensitic products upon request. The tolerances are valid for mother coils only before slitting.

          Hide/Show specific columns Edit
          Select columns to display
            Thickness
            (mmin)
            Max height 1)
            (mm)
            0.80 - 0.990.031 - 0.039 8
            1.00 - 1.390.0394 - 0.0547 7
            1.40 - 1.590.0551 - 0.0626 6
            1.60 - 1.790.0630 - 0.0705 5
            1.80 - 2.100.0709 - 0.0827 4
            Compare parameters

            Select one parameter to compare

            Comparison

              Thickness
              (mmin)
              0.80 - 0.990.031 - 0.039
              Max height 1)
              (mm)
              8
              Thickness
              (mmin)
              1.00 - 1.390.0394 - 0.0547
              Max height 1)
              (mm)
              7
              Thickness
              (mmin)
              1.40 - 1.590.0551 - 0.0626
              Max height 1)
              (mm)
              6
              Thickness
              (mmin)
              1.60 - 1.790.0630 - 0.0705
              Max height 1)
              (mm)
              5
              Thickness
              (mmin)
              1.80 - 2.100.0709 - 0.0827
              Max height 1)
              (mm)
              4

              EG coated martensitic grades are supplied with improved flatness tolerances.

              1) Distance from the top surface of the strip normal to flat surface. Measured with a ruler on sheets of mother coil width and minimum length 1200 mm. Cross bow and coil set excluded.

              Coatings

              The metal coating options for Docol products include:

              Electrogalvanized coating (EG) is applied continuously by electro deposition. The coating consists of zinc (>99%). Electrogalvanized steel is characterized by its excellent surface quality and uniform coating thickness.

              Grade specific availability of metal coatings for Docol products is given in the Mechanical properties table (Coating).

              Hide/Show specific columns Edit
              Select columns to display
                Coating type Coating class Standard Closest in EN standard, informative 1) Coating mass per side, single spot test (g/m2) Thickness per side informative (µm)
                EG 12/12 VDA 239-100 ZE25/25 12 - 32 1.7 - 4.5
                EG 18/18 VDA 239-100 18 - 38 2.5 - 5.4
                EG 29/29 VDA 239-100 ZE50/50 29 - 49 4.1 - 6.9
                EG 47/47 VDA 239-100 ZE75/75 47 - 61 6.6 - 8.6
                EG 50/50 VDA 239-100 50 - 70 7.0 - 9.9
                EG 53/53 VDA 239-100 53 - 73 7.5 - 10.3
                EG 60/60 VDA 239-100 60 - 80 8.5 - 11.3
                EG 65/65 VDA 239-100 ZE100/100 65 - 85 9.2 - 12.0
                EG 70/70 VDA 239-100 70 - 90 9.9 - 12.7
                Compare parameters

                Select one parameter to compare

                Comparison

                  Docol metal coated products are available with surface quality for unexposed applications.

                  In addition to these coating masses, OEM specific coatings and single sided EG coatings are available upon request.

                  1) For GI and GA the closest informative value refers to EN 10346. For EG to EN 10152.

                  Surface Treatments

                  Uncoated (UC): available as oiled.

                  Electrogalvanized (EG): available as oiled and/or chemically passivated or phosphated.

                  All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

                  Fabrication and Other Recommendations

                  For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                  Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                  Docol® Martensitic steel product offer

                  Docol® 900M martensitic

                  Docol® 1100M martensitic

                  Docol® 1200M martensitic

                  Docol® 1300M martensitic

                  Docol® 1400M martensitic

                  Docol® 1500M martensitic

                  Docol® 1700M martensitic

                  관련 내용