Docol® S700MC high strength low alloy

More about high strength low alloy steel

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    The high-strength structural steel Docol S700MC is a hot-rolled steel made for cold forming, with a minimum yield strength of 700 MPa for stronger and lighter structures. Docol S700MC meets or exceeds the requirements of S700MC in EN 10149-2. Typical applications include a wide range of heavy trucks components and parts, such as frame rails and cross-members. Docol S700MC comes in coils, slit coils and cut-to-length sheets.

    Dimension Range

    Hot rolled / UC: thickness 2.00-10.00 mm, width up to 1600 mm.

    Slit strip and cut to length sheets are available upon request.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)
      Standard Coating Test direction
      Yield strength ReH 1)
      (min MPaksi)
      Tensile strength Rm
      (MPaksi)
      Elongation A80 2)
      (min %)
      Elongation A5 3)
      (min %)
      Min. inner bending radius for a 90° bend 4)
      (x t)
      2.00 - 3.000.079 - 0.118 SSAB UC L 700101 750 - 950109 - 138 10 12 0.8
      3.01 - 6.000.119 - 0.236 SSAB UC L 700101 750 - 950109 - 138 12 1.2
      6.01 - 10.000.237 - 0.393 SSAB UC L 700101 750 - 950109 - 138 12 1.6
      Compare parameters

      Select one parameter to compare

      Comparison

        1) If ReH is not applicable then Rp0.2 is used. On thicknesses >8 mm the minimum yield strength may be 20MPa lower.

        2) A80 value applies for thicknesses < 3.00 mm.

        3) A5 value applies for thicknesses ≥ 3.00 mm.

        4) For both longitudinal and transverse direction.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Product Min. impact energy for longitudinal testing,
          Charpy V 10x10 mm test specimen
          Docol S700MC D 40 J / -20 °C29 ft-lbs / -4 °F
          Docol S700MC E 27 J / -40 °C20 ft-lbs / -40 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Product
            Docol S700MC D
            Min. impact energy for longitudinal testing,
            Charpy V 10x10 mm test specimen
            40 J / -20 °C29 ft-lbs / -4 °F
            Product
            Docol S700MC E
            Min. impact energy for longitudinal testing,
            Charpy V 10x10 mm test specimen
            27 J / -40 °C20 ft-lbs / -40 °F
            Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

            Chemical Composition (heat analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C
              (max %)
              Si
              (max %)
              Mn
              (max %)
              P
              (max %)
              S
              (max %)
              Altot
              (min %)
              Nb
              (max %)
              V
              (max %)
              Ti
              (max %)
              0.12 0.21 1) 2.10 0.020 0.010 0.015 0.09 2) 0.20 2) 0.15 2)
              Compare parameters

              Select one parameter to compare

              Comparison

                1) If the material is to be hot-dip galvanized, this must be specified in the order. Galvanizing class A available upon request.

                2) Sum of Nb, V and Ti = max 0.22%.

                The steel is grain refined.

                Carbon Equivalent CET(CEV)

                Hide/Show specific columns Edit
                Select columns to display
                  Thickness (mmin) 2.00 - 10.000.079 - 0.393
                  Typ CET(CEV) 0.25 (0.39)
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Thickness (mmin)
                    Typ CET(CEV)
                    2.00 - 10.000.079 - 0.393
                    0.25 (0.39)
                    CET and CEV formula

                    Tolerances

                    Hot rolled (UC): Tolerances in accordance to EN 10051.

                    Customized dimensional and shape tolerances are available upon request.

                    Surface treatments

                    Uncoated (UC): available as black or pickled and oiled.

                    All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

                    Fabrication and Other Recommendations

                    For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                    Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                    Docol® High Strength Low Alloy steel product offer

                    Docol® 420LA high strength low alloy

                    Docol® S600MC high strength low alloy

                    Docol® S650MC high strength low alloy

                    Docol® S700MC high strength low alloy

                    Docol® S900MC high strength low alloy

                    Docol® 460LA high strength low alloy

                    Docol® 500LA high strength low alloy

                    Docol® 550LA high strength low alloy

                    Docol® 600LA high strength low alloy

                    Docol® 650LA high strength low alloy

                    Docol® 700LA high strength low alloy

                    Related content