GreenCoat Pural Farm BT color coated steel is available in regular finish. It provides a coating where rapeseed oil and other renewable raw materials are used. SSAB has long experience of Bio-based Technology (BT) in GreenCoat® products.
GreenCoat Pural Farm BT offers the highest level of durability for agricultural buildings. It is made with a two-layer epoxy reverse side coating and used for sandwich panels in insulated and heated buildings e.g. chicken houses. The double-sided GreenCoat Pural Farm BT is used for profiles in non-insulated and cold buildings e.g. cowsheds and open storages.
GreenCoat Pural Farm BT color coated steel offers a coating that is optimized to resist weathering resulting in excellent UV resistance (Ruv4 class), corrosion properties (RC5 class) and gives excellent chemical resistance. It also possesses excellent forming properties. The slightly structured surface helps to protect against mechanical wear and is easy to handle during manufacturing.
The reverse side of the sheet is painted with a two-layer grey backside coating.
GreenCoat Pural Farm BT complies with current REACH regulations and is fully chromate-free.
SSAB’s color coated steels are all manufactured according to EN 10169.
GreenCoat and Pural are trademarks of the SSAB group of companies.
1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.
2) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.
Below are the colors currently available. Other colors can be agreed upon separately.
Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.
To ensure tonal consistency of colors on a single exterior face, all material should come from the same production batch. The directionality of surfaces should also be consistent especially when sheets are cut to size.
Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.
For easy material identification the reverse side of the sheet is stamped with the GreenCoat logo and the product name. The production date is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.
GreenCoat Pural Farm BT is also available as a double sided product. However, different sides of the sheet cannot be mixed due to the possibility of a visual difference. The reverse side may show wider variation in color and gloss.