SSAB Laser® 355C

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    SSAB Laser® 355C is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.

    SSAB Laser® 355C meets and exceeds the requirements of S355K2C+N in EN 10025-2. Dual certification and CE marking are available upon request.

    Dimension Range

    Hide/Show specific columns Edit
    Select columns to display
      Delivery form Thickness
      (mmin)
      Width
      (mmin)
      Length
      (mmin)
      Hot rolled sheet as rolled 3.0 - 15.00.12 - 0.591 1000 - 186039.37 - 73.23 1000 - 1600039.37 - 629.92
      Hot rolled sheet pickled and oiled 3.0 - 15.00.12 - 0.591 1000 - 183039.37 - 72.05 1000 - 1600039.37 - 629.92
      Hot rolled plate as rolled 8.0 - 30.00.31 - 1.18 1000 - 330039.37 - 129.9 2000 - 1500078.74 - 590.55
      Compare parameters

      Select one parameter to compare

      Comparison

        Mechanical Properties

        Hide/Show specific columns Edit
        Select columns to display
          Delivery form Thickness
          (mmin)
          Yield strength Re
          (min MPa)
          Tensile strength Rm
          (MPa)
          Elongation A5
          (min %)
          Min. inner bending radius 90° t ≤ 6mm 1)
          (x t)
          Min. inner bending radius 90° t ˃ 6mm 1)
          (x t)
          Hot rolled sheet 3.0 - 15.00.12 - 0.591 355 490 - 630 20 1.5 1.5
          Hot rolled plate 8.0 - 30.00.31 - 1.18 355 490 - 630 20 1.5
          Compare parameters

          Select one parameter to compare

          Comparison

            The mechanical properties are tested transverse to the direction of rolling.

            1) The bending guarantee is valid for both longitudinal and transverse direction.

            Impact Properties

            Hide/Show specific columns Edit
            Select columns to display
              Min. impact energy for longitudinal testing,
              Charpy V 10x10 mm test specimens
              40 J / -20 °C
              Compare parameters

              Select one parameter to compare

              Comparison

                Min. impact energy for longitudinal testing,
                Charpy V 10x10 mm test specimens
                40 J / -20 °C
                Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

                Chemical Composition (heat analysis)

                Hide/Show specific columns Edit
                Select columns to display
                  Delivery form C
                  (max %)
                  Si
                  (max %)
                  Mn
                  (max %)
                  P
                  (max %)
                  S
                  (max %)
                  CEV
                  (max )
                  Hot rolled sheet 0.18 0.03 1.6 0.020 0.020 0.45
                  Hot rolled plate 0.2 0.03 1.6 0.020 0.020 0.45
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    All SSAB Laser® steels are aluminum-killed (Al ≥ 0.015%) and grain-refined. Additionally, niobium (Nb), vanadium (V), titanium (Ti) and/or boron (B) may be used as single alloying element or in any combination.

                    Tolerances

                    All SSAB Laser® products are delivered with SSAB Laser® tolerances, which means increased guarantees compared to corresponding EN standards. Detailed information is available on ssab.com.

                    Thickness

                    Hot rolled sheet: SSAB Laser® tolerances correspond to ⅔ of EN 10051 as default. Tighter tolerances are available upon request.

                    Hot rolled plate: SSAB Laser® tolerances correspond to ¾ of EN 10029 as default.

                    Width

                    Hot rolled sheet: -0/+20 mm for mill edge sheet; -0/+2 mm for cut edge sheet. Tighter tolerances are available upon request.

                    Hot rolled plate: -0/+4-10mm depending on the thickness.

                    Length

                    Hot rolled sheet:

                    Hide/Show specific columns Edit
                    Select columns to display
                      Nominal length
                      (mm)
                      Tolerance
                      (mmin)
                      l ≤ 4000 - 0 / + 3- 0 / + 0.1
                      4000 ˂ l ≤ 6000 - 0 / + 4- 0 / + 0.2
                      6000 ˂ l ≤ 8000 - 0 / + 5- 0 / + 0.2
                      8000 ˂ l ≤ 13000 - 0 / + 6- 0 / + 0.2
                      13000 ˂ l ≤ 16000 - 0 / + 8- 0 / + 0.3
                      Compare parameters

                      Select one parameter to compare

                      Comparison

                        Nominal length
                        (mm)
                        l ≤ 4000
                        Tolerance
                        (mmin)
                        - 0 / + 3- 0 / + 0.1
                        Nominal length
                        (mm)
                        4000 ˂ l ≤ 6000
                        Tolerance
                        (mmin)
                        - 0 / + 4- 0 / + 0.2
                        Nominal length
                        (mm)
                        6000 ˂ l ≤ 8000
                        Tolerance
                        (mmin)
                        - 0 / + 5- 0 / + 0.2
                        Nominal length
                        (mm)
                        8000 ˂ l ≤ 13000
                        Tolerance
                        (mmin)
                        - 0 / + 6- 0 / + 0.2
                        Nominal length
                        (mm)
                        13000 ˂ l ≤ 16000
                        Tolerance
                        (mmin)
                        - 0 / + 8- 0 / + 0.3

                        Hot rolled plate:

                        Hide/Show specific columns Edit
                        Select columns to display
                          Nominal length
                          (mm)
                          Tolerance
                          (mm)
                          2000 ˂ l ≤ 10000 - 0 / + 15
                          10000 ˂ l ≤ 15000 - 0 / + 20
                          Compare parameters

                          Select one parameter to compare

                          Comparison

                            Nominal length
                            (mm)
                            2000 ˂ l ≤ 10000
                            Tolerance
                            (mm)
                            - 0 / + 15
                            Nominal length
                            (mm)
                            10000 ˂ l ≤ 15000
                            Tolerance
                            (mm)
                            - 0 / + 20

                            Shape

                            Tolerances according to EN 10029 for plate and according to EN 10051 for sheet.

                            Flatness

                            Hot rolled sheet: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

                            Hot rolled plate: ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

                            Surface Properties

                            According to EN 10163-2 Class A, Subclass 3.

                            Delivery Conditions

                            Normalized rolled.

                            Surface and edge condition

                            Hot rolled sheet: as rolled or pickled and oiled surface condition with mill edge. Cut edge is available upon request.

                            Hot rolled plate: as rolled surface condition and cut edges as default.

                            Fabrication and Other Recommendations

                            All SSAB Laser® products have been optimized for laser cutting, cold forming and welding.

                            For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                            Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                            Contact Information

                            www.ssab.com/contact