Armox® 560T

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    High hardness armor with extraordinary toughness properties.

    Armox® 560T is the world’s toughest protection plate, having nominal 560 HBW hardness, for use in vehicles, buildings and many more applications.

    Benefits of Armox® 560T include: 

    • Market-leading steel protection
    • Superior workshop properties
    • Optimized solutions
    • Perfect hardness/toughness balance, for combined penetration and blast protection
    • Expertise in ballistic protection from SSAB

    It offers vehicle designers new ways to increase protection using lighter weight designs.

    Armox® 560T is not intended for further heat treatment.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)
      Hardness
      (HBW)
      Yield strength Rp0.2
      (min MPaksi)
      Tensile strength Rm
      (MPaksi)
      Elongation A5
      (min %)
      Elongation A50
      (min %)
      4.0 - 15.00.157 - 0.591 530 - 590 1300188 1650 - 2000239 - 290 7 9
      Compare parameters

      Select one parameter to compare

      Comparison

         

        Mechanical Testing

        Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual.

        Charpy impact test according to EN ISO 148 on each heat and thickness from 6 mm.

        Tensile test according to EN ISO 6892 on each heat.

        Ultrasonic testing

        According to EN ISO 10160 Class E3S3.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Thickness
          (mmin)
          Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          4.0 - 15.00.157 - 0.591 20 J / -40 °C15 ft-lbs / -40 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Thickness
            (mmin)
            4.0 - 15.00.157 - 0.591
            Min impact energy for transversal testing,
            Charpy V 10x10 mm test specimen 1)
            20 J / -40 °C15 ft-lbs / -40 °F

            1) Average of three tests. Transverse to rolling direction. Single value min. 70% of specified average. For plate thicknesses under 12 mm sub-size Charpy-V specimen are used. The specified minimum value is then propotional to the specimen cross-section.

            Chemical Composition (ladle analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C *)
              (max %)
              Si *)
              (max %)
              Mn*)
              (max %)
              P
              (max %)
              S
              (max %)
              Cr*)
              (max %)
              Ni*)
              (max %)
              Mo*)
              (max %)
              B*)
              (max %)
              0.37 0.70 1.00 0.010 0.003 1.0 1.80 0.50 0.005
              Compare parameters

              Select one parameter to compare

              Comparison

                The steel is grain-refined. *) Intentional alloying elements.

                Tolerances

                More details are given in SSAB´s brochure Armox® Guarantees or on www.ssab.com.

                Thickness

                Hide/Show specific columns Edit
                Select columns to display
                  Thickness
                  (mmin)
                  Tolerance
                  (mmin)
                  4.0 - 12.90.118 - 0.508 - 0.0 / + 0.6- 0.00 / + 0.024
                  13.0 - 15.00.512 - 0.591 - 0.0 / + 0.8- 0.00 / + 0.031
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Thickness
                    (mmin)
                    4.0 - 12.90.118 - 0.508
                    Tolerance
                    (mmin)
                    - 0.0 / + 0.6- 0.00 / + 0.024
                    Thickness
                    (mmin)
                    13.0 - 15.00.512 - 0.591
                    Tolerance
                    (mmin)
                    - 0.0 / + 0.8- 0.00 / + 0.031

                    Length and Width

                    According to SSAB´s dimension program.

                    • Tolerances conform to EN 10029 or to SSAB´s standard after agreement.
                    • Dimensional tolerances for plate with mill edge according to special agreement.

                    Shape

                    Tolerances according to EN 10029.

                    Flatness

                    Tolerances according to Armox® flatness guarantees, which are more restrictive than EN 10029 Class N (steel type L).

                    Surface Properties

                    According to EN 10163-2 Class B Subclass 3.

                    Delivery Conditions

                    The delivery condition is QT (Quenched and Tempered).

                    Delivery requirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com.