Toolox 40

Toolox® 40

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data.

    General Product Description

    The pre-hardened, exceptionally clean engineering and tool steel.

    Toolox® 40 is a pre-hardened steel suitable for engineering components and mold applications. It possesses good dimensional stability after machining.

    Toolox® 40 features the same machinability as the conventional P20/W.Nr 1.2311 steel, despite its nearly 100 HBW higher nominal hardness, in combination with the renowned high dimensional stability of Toolox®. This makes Toolox® 40 your ideal choice in engineering components that require higher strength, or in molds and dies that demand higher wear resistance.

    Dimension Range

    Toolox® 40 is available as plates in thicknesses between 6.0 - 130.0 mm. Other dimensions can be available on request.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)      		 Hardness 1)
      (HBW)
      6.0 - 130.00.236 - 5.118 360 - 420
      Compare parameters

      Select one parameter to compare

      Comparison

        Thickness
        (mmin)
        6.0 - 130.00.236 - 5.118
        Hardness 1)
        (HBW)
        360 - 420

        1) Hardness is measured, according to EN ISO 6506-1, on a milled surface 0.5 - 2 mm below the plate surface.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Thickness
          (mmin)          		 Min impact energy for transversal testing,
          Charpy V 10x10 mm test specimen 1)
          6.0 - 130.00.236 - 5.118 20 J / 20 °C15 ft-lbs / 68 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Thickness
            (mmin)
            6.0 - 130.00.236 - 5.118
            Min impact energy for transversal testing,
            Charpy V 10x10 mm test specimen 1)
            20 J / 20 °C15 ft-lbs / 68 °F

            1) Impact testing according to EN 10 025, EN ISO 148 with a 2 mm striker.

             

             

             

            Ultrasonic testing

            Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.

            Tolerances

            More details are given in SSAB’s brochure Toolox® Guarantees and on www.toolox.com.

            Thickness

            Tolerances according to Toolox® Thickness Guarantee.

            Toolox® Guarantees meets the requirements of EN 10029 Class C but offers more narrow tolerances.

            Length and Width

            Tolerances according to EN 10029.

            Flatness

            Tolerances are according to Toolox® Flatness Guarantees, which are more restrictive than EN 10029 Class N (steel type L).

            Surface Properties

            According to EN 10163-2 Class B Subclass 3.

            Delivery Conditions

            Quenched and Tempered at a minimum temperature of 590 °C.

            On delivery from SSAB the plates meet the following specifications:

            • Free from mill scale
            • Not repair welded

            Delivery requirements can be found in SSAB’s brochure Toolox® Guarantees or at www.toolox.com.