Ramor® 450

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

Combines ballistic properties with impact toughness.

Ramor® 450 is a medium-hard protection plate combining ballistic properties with impact toughness, at 8.0 ‑ 16.0 mm (0.315‑0.630″) thick and 400‑480 HBW. Ramor® 450 is not intended for further heat treatment.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Thickness
    (inmm)
    Hardness
    (HBW)
    Yield strength Rp0.2
    (min ksiMPa)
    Tensile strength Rm
    (min ksiMPa)
    Elongation A5
    (min %)
    Ramor® 450 0.315 - 0.6308.00 - 16.00 400 - 480 1451000 1671150 8
    Compare parameters

    Select one parameter to compare

    Comparison

       

      Mechanical Testing

      Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual/coil.

      Hardness is measured on a milled surface 0.012 - 0.079" below plate surface.  

      Charpy impact test according to EN ISO 148, 1 test/20 ton. 

      Tensile test according to EN ISO 6892 on each plate and thickness <0.783".

      Impact Properties

      Hide/Show specific columns Edit
      Select columns to display
        Thickness
        (inmm)
        Min impact energy, transverse test,
        Charpy V 0.393x0.393" test specimen 1)
        0.315 - 0.6308.00 - 16.00 15 ft-lbs / -40 °F20 J / -40 °C
        Compare parameters

        Select one parameter to compare

        Comparison

          Thickness
          (inmm)
          0.315 - 0.6308.00 - 16.00
          Min impact energy, transverse test,
          Charpy V 0.393x0.393" test specimen 1)
          15 ft-lbs / -40 °F20 J / -40 °C

          1) Impact testing transverse to rolling direction, average value of three tests. Single value min. 70% of specified average.

          Chemical Composition (heat analysis)

          Hide/Show specific columns Edit
          Select columns to display
            C
            (max %)
            Si
            (max %)
            Mn
            (max %)
            P
            (max %)
            S
            (max %)
            Cr
            (max %)
            Ni
            (max %)
            Mo
            (max %)
            B
            (max %)
            0.25 0.70 1.50 0.015 0.010 1.00 2.0 0.70 0.005
            Compare parameters

            Select one parameter to compare

            Comparison

              The steel is grain-refined. Phosphorous and sulphur are not intentionally alloying elements.

              Tolerances

              More details are given on www.ssab.com.

              Thickness

              Hide/Show specific columns Edit
              Select columns to display
                Product Type Thickness
                (inmm)
                Tolerance
                (inmm)
                Plate 0.315 - 0.5878.00 - 14.9 - 0.0 / + 0.0394- 0.0 / + 1.0
                Plate 0.590 - 0.63015.0 - 16.0 - 0.0 / + 0.0433- 0.0 / + 1.1
                Compare parameters

                Select one parameter to compare

                Comparison

                  Length and Width

                  According to SSAB’s dimension program.

                  • Tolerances conform to EN 10029 or to SSAB’s standard after agreement.
                  • Dimensional tolerances for plate with mill edge according to special agreement. 

                  Shape

                  Tolerances according to EN 10029.

                  Flatness

                  Tolerances according to SSAB’s flatness tolerances which are more restrictive than EN 10029 Class N (steel type L). 

                  Surface Properties

                  According to EN 10163-2 Class B Subclass 3.

                  Delivery Conditions

                  Ramor is delivered in quenched condition.