Coils for conversion

As-rolled Coil Product for Conversion to Plate Grades

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page
Show specs in Imperial Metric

General Product Description

In addition to SSAB producing coils to the ASTM 1011 and ASTM 1018 specifications, SSAB also produces as-rolled coils that can be converted by a coil processor to the requirements of the ASTM and CSA structural specifications, to ASTM pressure vessel steel specifications, and SSAB's Proprietary specifications. Inquire for other specifications and grades not listed in the table below, for example, API grades. SSAB will only certifythe as-rolled coils to the chemistry requirements of the respective specification.

Dimension Range

Hide/Show specific columns Edit
Select columns to display
    Grade Product type Thickness
    (inmm)
    Width
    (inmm)
    A36 Coil for Conversion to 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    A242 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 60 - 961500 - 2400
    A283 Grades C and D Coil for Conversion to 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    A516 Grade 60, 65, and 70 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 72 - 961800 - 2400
    A572 Grade 42, 50, 55, and 60 Coil for Conversion to 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    A572 Grade 65 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 60 - 961500 - 2400
    A656 Grade 50 Coil for Conversion to 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    A656 Grades 60, 70, and 80 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 60 - 961500 - 2400
    A871 Grades 60 and 65 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 72 - 961800 - 2400
    AR200 Coil for Conversion to 0.188 - 0.5004.78 - 12.7 60 - 961500 - 2400
    AR235 Coil for Conversion to 0.188 - 0.3754.78 - 9.52 60 - 961500 - 2400
    CSA 38W, 38WT, 44W, 44WT, 50W and 50WT Coil for Conversion to 0.188 - 0.7504.78 - 19.0 60 - 961500 - 2400
    CSA 50A and 50AT Coil for Conversion to 0.188 - 0.5004.78 - 12.7 60 - 961500 - 2400
    CSA 60W and 60WT Coil for Conversion to 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    Compare parameters

    Select one parameter to compare

    Comparison

      Product Type: Coils are excluded from the qualification to the referenced plate specification until the coils are processed into a finished plate product and all required processing, inspections and testing are performed according to the respective specification. SSAB will certifythe as-rolled coils to the chemistry requirements only. Any tensile testing information provided by SSAB shall not be used for certifying any cut-to-length sheets to the governing specifications.

      Thickness: Please inquire for thicknesses less than or greater than the specified minimums or maximums.

      Width: Please inquire for widths less than or greater than the noted minimums or maximums.