Armox® Advance

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

SSAB’s toughest, ultra-hard protection plate.

Armox® Advance is SSAB’s toughest appliqué (add-on) protection plate for use where component weight reduction is essential. It is available in thicknesses between 0.157" and 0.311", and not intended for further heat treatment.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Thickness
    (inmm)
    Hardness
    (HRC)
    0.157 - 0.3114.0 - 7.9 58 - 63
    Compare parameters

    Select one parameter to compare

    Comparison

      Thickness
      (inmm)
      0.157 - 0.3114.0 - 7.9
      Hardness
      (HRC)
      58 - 63

       

      Mechanical Testing

      Brinell hardness test according to EN ISO 6506-1 on each heat treatment individual.

      Charpy impact test according to EN ISO 148 on each heat and thickness from 0.236".

      Tensile test according to EN ISO 6892 on each heat and thickness under 0.783".

      Ultrasonic testing

      According to EN 10160 Class E3S3 for thicknesses up to 3.149" and E1S2 for > 3.149".

      Chemical Composition (heat analysis)

      Hide/Show specific columns Edit
      Select columns to display
        C *)
        (max %)
        Si *)
        (max %)
        Mn*)
        (max %)
        P
        (max %)
        S
        (max %)
        Cr*)
        (max %)
        Ni*)
        (max %)
        Mo*)
        (max %)
        B*)
        (max %)
        0.48 0.70 1.00 0.010 0.003 1.5 3.0 0.70 0.005
        Compare parameters

        Select one parameter to compare

        Comparison

          The steel is grain-refined. *) Intentional alloying elements.

          Tolerances

          More details are given in SSAB brochure Armox® Guarantees or on www.ssab.com.

          Thickness

          Hide/Show specific columns Edit
          Select columns to display
            Thickness
            (inmm)
            Tolerance
            (inmm)
            0.157 - 0.3114.0 - 7.9 - 0.0 / + 0.0236- 0.0 / + 0.6
            Compare parameters

            Select one parameter to compare

            Comparison

              Thickness
              (inmm)
              0.157 - 0.3114.0 - 7.9
              Tolerance
              (inmm)
              - 0.0 / + 0.0236- 0.0 / + 0.6

              Tolerances according to Armox® Thickness Guarantees.

              Armox® Guarantees meet the requirements of EN 10029 Class C, but offers narrower tolerances.

              Length and Width

              Tolerances conform to EN 10029 or to SSAB´s standard after agreement.

              Dimensional tolerances for plate with mill edge according to special agreement. 

              Shape

              Tolerances according to EN 10029.

              Flatness

              Flatness tolerance for thicknesses between 0.157 – 0.272" are according to Armox® flatness guarantee, which are more restrictive than EN 10029 Class N (steel type L). For thicknesses between 0.276 – 0.311", the maximum accepted flatness deviation is 0.315"  per 39.370".

              Surface Properties

              According to EN 10163-2 Class B Subclass 3.

              Delivery Conditions

              The delivery condition is Q (Quenched).

              Deliveryrequirements can be found in SSAB’s brochure Armox® Guarantees or www.ssab.com