ABS Grade A, B, D, E
Download data sheet
Download data sheet
ABS Grades A, B, D, and E are ordinary-strength structural steels with a minimum specified yield strength of 34 ksi and specified minimum Charpy V-notch impact toughness properties.
ApplicationsTypical applications include shipbuilding and mobile offshore drilling units and structures.
Grade | Product type | Thickness (in) |
Width (in) |
Length (in) |
---|---|---|---|---|
Grade A | Plate | 0.1875 - 5.90 | 72 - 129.9 | 79 - 1020 |
Grade B | Plate | 0.1875 - 5.90 | 72 - 129.9 | 79 - 1020 |
Grade D | Plate | 0.1875 - 5.90 | 72 - 129.9 | 79 - 1020 |
Grade E | Plate | 0.1970 - 5.90 | 72 - 129.9 | 79 - 590 |
Width: Please inquire for plate widths less than 72 in. and inquire plate product over 120 in.
Length: Please inquire for plate lengths greater than the listed maximum. Please inquire for plate lengths less than 240 in.
Tensile testing is performed in the transverse direction.
Grade | Thickness (in) |
Yield strength (min ksi) |
Tensile strength (ksi) |
Elongation A5 1) (%) |
---|---|---|---|---|
Grade A | 0.1875 - 5.90 | 34 | 58 - 75 | 22 |
Grade B | 0.1875 - 5.90 | 34 | 58 - 75 | 22 |
Grade D | 0.1875 - 5.90 | 34 | 58 - 75 | 22 |
Grade E | 0.1970 - 5.90 | 34 | 58 - 75 | 22 |
1) See ABS Rules for elongation requirements for alternative tensile specimens.
Grade | Thickness (in) |
Test temperature(°F) | Min Longitudinal Average Energy 1)(ft-lbs) | Min transverse average energy 1)(ft-lbs) |
---|---|---|---|---|
Grade A | 2.001 - 2.80 | 68 | 25 | 17 |
Grade A | 2.801 - 4.00 | 68 | 30 | 20 |
Grade A | 4.01 - 5.90 | 68 | 30 | 20 |
Grade B | 1.001 - 2.00 | 32 | 20 | 14 |
Grade B | 2.001 - 2.80 | 32 | 25 | 17 |
Grade B | 2.801 - 4.00 | 32 | 30 | 20 |
Grade B | 4.001 - 5.90 | 32 | 30 | 20 |
Grade D | 0.1875 - 2.00 | -4 | 20 | 14 |
Grade D | 2.001 - 2.80 | -4 | 25 | 17 |
Grade D | 2.801 - 4.00 | -4 | 30 | 20 |
Grade D | 4.001 - 5.90 | -4 | 30 | 20 |
Grade E | 0.197 - 2.00 | -40 | 20 | 14 |
Grade E | 2.001 - 2.80 | -40 | 25 | 17 |
Grade E | 2.801 - 4.00 | -40 | 30 | 20 |
Grade E | 4.01 - 5.90 | -40 | 30 | 20 |
1) Specimen orientation at the option of the manufacturer unless otherwise specified in the order.
No more than one value below the specified miniminum average energy but no less than 70% of the specfied minimum average energy value.
Impact tests not required for Grade A if produced using fine grain practice and normalized.