Nova

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

Nova color coated steel from SSAB is available in regular and matt finishes.

Nova color coated steel is used in profiled roofs and roof fittings. It offers a coating thickness that is optimized for wear and weather resistance and has greater durability than standard polyester when exposed to people walking on the roof and other roof stresses. 

The reverse side of the sheet is painted with a two-layer grey backside coating.

Nova complies with current REACH regulations and is fully free of chromates.

SSAB’s color coated steels are all manufactured according to EN 10169.

Technical Properties

Hide/Show specific columns Edit
Select columns to display
    Technical Properties Matt Regular
    Gloss 10 40
    Minimum inner bending radius 1 x sheet thickness 1 x sheet thickness
    Scratch resistance 35 N 35 N
    Lowest forming temperature -10 °C -10 °C
    UV radiation resistance RUV3 RUV3
    Corrosion resistance 1) RC5 RC5
    Stain resistance Very good Very good
    Highest operating temperature 100 °C 100 °C
    Fire classification, EN 13501-1 A2 s2 d0 A2 s2 d0
    Coating thickness, nominal (primer + top coat) 50 µm 50 µm
    Coating structure Structured Structured
    Steel designation FAP,S280GD, S320GD, S350GD, DX52D 2) FAP,S280GD, S320GD, S350GD, DX52D 2)
    Zinc coating 275 g/m2 275 g/m2
    Min steel thickness 3) 0.50 mm 0.50 mm
    Steel width 3) 1000 - 1500 mm 1000 - 1500 mm
    Compare parameters

    Select one parameter to compare

    Comparison

      1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.

      2) FAP fulfills the requirements of EN 10346 DX52D.

      3) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.

      Colors

      Below are the colors currently available. Other colors can be agreed upon separately.

      Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.

      8 Available Colors
      Preview colors
      Close

      Colors

      Nova

      Winter White

      RR20 / SS0005

      Regular

      Pebble Grey

      RR21 / SS0011

      Regular

      Stone Grey

      RR22 / SS0554

      Regular

      Mountain Grey

      RR23 / SS0036

      Regular, Matt

      Nordic Night Black

      RR33 / SS0015

      Regular, Matt

      Walnut Brown

      RR32 / SS0387

      Regular, Matt

      Cottage Red

      RR29 / SS0758

      Regular, Matt

      Red

      RR7H1 / SS6012

      Matt

      Reverse Side Coating

      Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.

      Hide/Show specific columns Edit
      Select columns to display
        Technical Properties
        Nominal Coating Thickness (primer + top coat) 12 µm
        Color Grey
        Corrosion Resistance Min CPI3
        Compare parameters

        Select one parameter to compare

        Comparison

          Technical Properties
          Nominal Coating Thickness (primer + top coat)
          12 µm
          Technical Properties
          Color
          Grey
          Technical Properties
          Corrosion Resistance
          Min CPI3

          For easy material identification the reverse side of the sheet is stamped with the SSAB logo and the product name. The production year is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.

          Contact Information

          www.ssab.com/contact