Polyester
Download data sheet
Download data sheet
Polyester color coated steel from SSAB offers a wide range of colors inspired by Nordic nature. The typical gloss level is regular gloss, but other glosses are available from request.
Polyester is typically used in profiled applications such as warehouses, agricultural buildings, halls and sheds. Polyester possesses good weather resistance properties (RC3) and offers a smooth surface and a good flexibility when processing.
The reverse side of the sheet is painted with a two-layer grey backside coating.
Polyester complies with current REACH regulations and is fully free of chromates.
SSAB’s color coated steels are all manufactured according to EN 10169.
1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after two years exposure in natural outdoor testing sites as specified in EN 10169.
2) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.
Below are the colors currently available. Other colors can be agreed upon separately.
Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.
Colors
Polyester
Frost White
RR106 / SS0009
Regular
Nordic White
RR1H3 / SS0020
Regular
Winter White
RR20 / SS0005
Regular
White
RR--- / SS0010
Regular
White
RR135 / SS0248
Regular
White
RR1G5 / SS0109
Regular
White
RR1G6 / SS----
Regular
Fog White
RR143 / SS----
Regular
White
RR1L4 / SS0078
Regular
Limestone Grey
RR268 / SS0022
Regular
Cloud Grey
RR2B1 / SS----
Regular
Pebble Grey
RR21 / SS0011
Regular
Stone Grey
RR22 / SS0554
Regular
Rock Grey
RR237 / SS0061
Regular
Grey
RR2J9 / SS5036
Regular
Anthracite Grey
RR2H8 / SS0087
Regular
Mountain Grey
RR23 / SS0036
Regular
Ridge Grey
RR2F7 / SS0035
Regular
Cliff Grey
RR288 / SS0455
Regular
Slate Grey
RR2H3 / SS0534
Regular
Nordic Night Black
RR33 / SS0015
Regular
Walnut Brown
RR32 / SS0387
Regular
Chestnut Brown
RR887 / SS0435
Regular
Acorn Brown
RR827 / SS0434
Regular
Cottage Red
RR29 / SS0758
Regular
Tile Red
RR750 / SS0760
Regular
Brick Red
RR7F2 / SS0742
Regular
Red
RR786 / SS5415
Regular
Harvest Yellow
RR24 / SS0189
Regular
Silver Fir Green
RR5J3 / SS0975
Regular
Leaf Green
RR594 / SS0874
Regular
Pine Green
RR11 / SS0830
Regular
Lake Blue
RR35 / SS0558
Regular
Metallic Silver
RR40 / SS0045
Regular
Metallic
RR947 / SS----
Regular
Note for Metallic colors: To ensure tonal consistency of colors on a single exterior face, all material must come from the same production batch. Also the directionality of surfaces has to be consistent especially when sheets are cut to size.
Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.
For easy material identification the reverse side of the sheet is stamped with the SSAB logo and the product name. The production year is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.
Polyester is also available as a double sided product. However, different sides of the sheet cannot be mixed due to the possibility of a visual difference. The reverse side may show wider variation in color and gloss.
Temporary protective films are available for protection during processing and installation. Protective films are applied on the top side of the Product. Films will be centered to the strip meaning that typically there are small unprotected areas in both edges of the strip. Unprotected area may be cut away if customer so wishes. Joined film strip ends are marked with red tape on the edge of the product.
Products with protective film should be stored in dry and warm conditions, since the adhesion between protective film and color coating decreases both in high and low temperatures. Humidity changes also the adhesion properties and in worst case leaves the adhesive part of the film on the product surface.
Adhesion of protective film increases over time, eventually making it difficult to remove the film from the Product’s surface. Due to that, protective film is recommended to be removed from the material as soon as possible, but no later than six months from the manufacturing of the Product or after one month from the end product installation depending on which comes first.
Protective film decreases friction between coil windings, which creates a high risk of coil collapsing on thin gauge coils. Due to the risk of collapsing, SSAB does not recommend protective films for steel nominal thickness ≤ 0,60 mm. If protective film is essential, following precautions must be taken to minimize the risk of collapsing: Max coil weight < 5 tons and self-supporting coil protection shields must be used in the package.
Typical protective film thickness is around 45µm, max working temperature +80°C and max and min stripping temperatures +40°C & -10°C.
Protective film has a good resistance to forming but is susceptible to cuts. When working with material with a protective film, clean tools that do not damage the film, and appropriate methods are to be used. Cutting fluids are not needed because the film protects the material surface and reduces friction. Cutting fluids may also have negative impact on the protective film and its adhesion.
Protective films can be recycled as plastics, combusted or disposed via the municipal waste management system depending on the local waste management guidelines and regulations.