Docol® 1500M martensitic

Download data sheet

General Product Description

A martensitic steel for automotive applications, SSAB Docol 1500M allows for increased crashworthiness, lightweight design and cost-efficient production methods for the automotive industry. SSAB Docol 1500M is one of the strongest advanced high-strength steels on the market and has become the material of choice for automotive applications such as side impact beams, bumpers and structural components.

Dimension Range

Cold rolled / UC: thickness 0.50-2.10 mm, width up to 1527 mm.

Cold rolled / EG: thickness 0.80-2.00 mm, width up to 1300 mm.

Hot rolled / UC: thickness 2.00-4.00 mm, width up to 1530 mm.

Slit strip and cut to length sheets are available upon request.

Grade and coating specific restrictions on available dimensions may occur.

Mechanical Properties

Docol CR​1220Y​1500T-​MS

Standard
VDA 239-100
Coating
UC, EG
Test direction
L
Yield strength Rp0.2
(MPa)
1220 - 1520
Tensile strength Rm
(MPa)
1500 - 1750
Elongation A80
(min %)
3
Elongation A5
(min %)
—
BH2
(min MPa)
30
Min. inner bending radius for a 90° bend
4.0 x t 1)

Docol HR​1220Y​1500T-​MS

Standard
SSAB
Coating
UC*
Test direction
L
Yield strength Rp0.2
(MPa)
1220 - 1520
Tensile strength Rm
(MPa)
1500 - 1750
Elongation A80
(min %)
3
Elongation A5
(min %)
4
BH2
(min MPa)
30
Min. inner bending radius for a 90° bend
4.0 x t 1)

The testing of mechanical properties of electrogalvanized products is conducted without coating.

* Available upon request

1) 3.5xt when using roll forming process according to best practices.

Chemical Composition (ladle analysis)

Docol CR​1220Y​1500T-​MS

Coating
UC, EG
C
(max %)
0.28
Si
(max %)
0.40
Mn
(max %)
1.30
P
(max %)
0.020
S
(max %)
0.010
Al
(%)
From 0.015
Nb+Ti
(max %)
0.10
Cr+Mo
(max %)
1.00
B
(max %)
0.010
Cu
(max %)
0.20

Docol HR​1220Y​1500T-​MS

Coating
UC*
C
(max %)
0.28
Si
(max %)
1.00
Mn
(max %)
2.00
P
(max %)
0.020
S
(max %)
0.025
Al
(%)
From 0.010
Nb+Ti
(max %)
0.15
Cr+Mo
(max %)
1.00
B
(max %)
0.010
Cu
(max %)
0.20
* Available upon request.

Tolerances

Hot rolled (UC): Tolerances in accordance to EN 10051

Cold rolled (UC, EG): Tolerances in accordance to EN 10131.

Customized dimensional and shape tolerances are available upon request.

The following improved flatness tolerances are available for cold rolled martensitic products upon request. The tolerances are valid for mother coils only before slitting.

Thickness
(mmin)
Thickness
(mmin)
0.80 - 0.990.031 - 0.039
Max height 1)
(mm)
8
Thickness
(mmin)
Thickness
(mmin)
1.00 - 1.390.0394 - 0.0547
Max height 1)
(mm)
7
Thickness
(mmin)
Thickness
(mmin)
1.40 - 1.590.0551 - 0.0626
Max height 1)
(mm)
6
Thickness
(mmin)
Thickness
(mmin)
1.60 - 1.790.0630 - 0.0705
Max height 1)
(mm)
5
Thickness
(mmin)
Thickness
(mmin)
1.80 - 2.100.0709 - 0.0827
Max height 1)
(mm)
4

EG coated martensitic grades are supplied with improved flatness tolerances.

1) Distance from the top surface of the strip normal to flat surface. Measured with a ruler on sheets of mother coil width and minimum length 1200 mm. Cross bow and coil set excluded.

Coatings

The metal coating options for SSAB Docol products include:

Electrogalvanized coating (EG) is applied continuously by electro deposition. The coating consists of zinc (>99%). Electrogalvanized steel is characterized by its excellent surface quality and uniform coating thickness.

Grade specific availability of metal coatings for SSAB Docol products is given in the Mechanical properties table (Coating).

Coating type
Coating type
EG
Coating class
12/12
Standard
VDA 239-100
Closest in EN standard, informative 1)
ZE25/25
Coating mass per side, single spot test (g/m2)
12 - 32
Thickness per side informative (µm)
1.7 - 4.5
Coating type
Coating type
EG
Coating class
18/18
Standard
VDA 239-100
Closest in EN standard, informative 1)
—
Coating mass per side, single spot test (g/m2)
18 - 38
Thickness per side informative (µm)
2.5 - 5.4
Coating type
Coating type
EG
Coating class
29/29
Standard
VDA 239-100
Closest in EN standard, informative 1)
ZE50/50
Coating mass per side, single spot test (g/m2)
29 - 49
Thickness per side informative (µm)
4.1 - 6.9
Coating type
Coating type
EG
Coating class
47/47
Standard
VDA 239-100
Closest in EN standard, informative 1)
ZE75/75
Coating mass per side, single spot test (g/m2)
47 - 61
Thickness per side informative (µm)
6.6 - 8.6
Coating type
Coating type
EG
Coating class
50/50
Standard
VDA 239-100
Closest in EN standard, informative 1)
—
Coating mass per side, single spot test (g/m2)
50 - 70
Thickness per side informative (µm)
7.0 - 9.9
Coating type
Coating type
EG
Coating class
53/53
Standard
VDA 239-100
Closest in EN standard, informative 1)
—
Coating mass per side, single spot test (g/m2)
53 - 73
Thickness per side informative (µm)
7.5 - 10.3
Coating type
Coating type
EG
Coating class
60/60
Standard
VDA 239-100
Closest in EN standard, informative 1)
—
Coating mass per side, single spot test (g/m2)
60 - 80
Thickness per side informative (µm)
8.5 - 11.3
Coating type
Coating type
EG
Coating class
65/65
Standard
VDA 239-100
Closest in EN standard, informative 1)
ZE100/100
Coating mass per side, single spot test (g/m2)
65 - 85
Thickness per side informative (µm)
9.2 - 12.0
Coating type
Coating type
EG
Coating class
70/70
Standard
VDA 239-100
Closest in EN standard, informative 1)
—
Coating mass per side, single spot test (g/m2)
70 - 90
Thickness per side informative (µm)
9.9 - 12.7

SSAB Docol metal coated products are available with surface quality for unexposed applications.

In addition to these coating masses, OEM specific coatings and single sided EG coatings are available upon request.

1) For GI and GA the closest informative value refers to EN 10346. For EG to EN 10152.

Surface Treatments

Uncoated (UC): available as oiled.

Electrogalvanized (EG): available as oiled and/or chemically passivated or phosphated.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® Martensitic steel product offer

Docol® 900M martensitic

Ver produto

Docol® 1100M martensitic

Ver produto

Docol® 1200M martensitic

Ver produto

Docol® 1300M martensitic

Ver produto

Docol® 1400M martensitic

Ver produto

Docol® 1500M martensitic

Ver produto

Docol® 1700M martensitic

Ver produto

Conteúdo relacionado

Estoque de amostras

Quer descobrir aplicações automotivas exclusivas, experimentar novos métodos de produção ou criar componentes mais leves e capazes de aumentar a eficiência do combustível, de resistir a colisões e com melhor sustentabilidade?

Read more

Dados de conformação para os aços AHSS Docol®

Os clientes existentes do Docol® têm acesso 24 horas por dia, 7 dias por semana aos dados de conformação necessários para ajudá-los na seleção e simulação de aços automotivos avançados de alta resistência.

Read more