Docol® 600LA high strength low alloy

Download data sheet

General Product Description

The Docol 600LA is a high-strength low-alloy steel that offer consistent properties for modern, rapid production methods. Typical applications include components and parts such as load-bearing structures, for example chassis. Docol HR600LA-UC can after agreement be adapted and delivered as dual certified with S600MC according to EN 10149-2.

Dimension Range

Hot rolled / UC: thickness 2.00-6.00 mm, width up to 1600 mm.

Slit strip and cut to length sheets are available upon request.

Grade and coating specific restrictions on available dimensions may occur.

Mechanical Properties

Docol HR​600LA

Standard
SSAB
Coating
UC
Test direction
L
Yield strength Rp0.2
(MPa)
600 - 730
Tensile strength Rm
(MPa)
650 - 820
Elongation A80
(min %)
13 1)
Elongation A5
(min %)
16 2)
Min. inner bending radius for a 90° bend
1.1 x t

1) A80 value applies for thicknesses < 3.00 mm.

2) A5 value applies for thicknesses ≥ 3.00 mm.

Chemical Composition (ladle analysis)

Docol HR​600LA

Coating
UC
C
(max %)
0.12
Si
(max %)
0.60
Mn
(max %)
1.90
P
(max %)
0.025
S
(max %)
0.010
Al
(%)
From 0.015
Ti
(max %)
0.15
Nb
(max %)
0.09
Cu
(max %)
0.20

Tolerances

Hot rolled (UC): Tolerances in accordance to EN 10051.

Customized dimensional and shape tolerances are available upon request.

Surface Treatments

Uncoated (UC): available as oiled.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® High Strength Low Alloy steel product offer

Docol® 420LA high strength low alloy

Ver producto

Docol HR100XF

Ver producto

Docol HR110XF

Ver producto

Docol® S600MC high strength low alloy

Ver producto

Docol® S650MC high strength low alloy

Ver producto

Docol® S700MC high strength low alloy

Ver producto

Docol® S900MC high strength low alloy

Ver producto

Docol S960MC

Ver producto

Docol® 460LA high strength low alloy

Ver producto

Docol® 500LA high strength low alloy

Ver producto

Docol® 550LA high strength low alloy

Ver producto

Docol® 600LA high strength low alloy

Ver producto

Docol® 650LA high strength low alloy

Ver producto

Docol® 700LA high strength low alloy

Ver producto

Contenido relacionado

Existencias de materiales de prueba

¿Desea descubrir aplicaciones únicas de automoción, probar nuevos métodos de producción o crear componentes más ligeros que ahorren combustible y mejoren la resistencia a los impactos y la sostenibilidad?

Read more

Datos de conformado para aceros AHSS Docol®

Los clientes existentes de Docol® disfrutan de un acceso 24/7 a los datos de conformado que necesita para ayudarle en su selección y simulación de aceros avanzados de alta resistencia para automoción.

Read more