Toolox® 40

Descargar ficha de datos

Seleccionar idioma

Get datasheet by email
Close

Get datasheet by email

    Descripción general del producto

    The pre-hardened, exceptionally clean engineering and tool steel.

    Toolox® 40 is a pre-hardened steel suitable for engineering components and mold applications. It possesses good dimensional stability after machining.

    Toolox® 40 features the same machinability as the conventional P20/W.Nr 1.2311 steel, despite its nearly 100 HBW higher nominal hardness, in combination with the renowned high dimensional stability of Toolox®. This makes Toolox® 40 your ideal choice in engineering components that require higher strength, or in molds and dies that demand higher wear resistance.

    Rango de dimensiones

    Toolox® 40 is available as plates in thicknesses between 6.0 - 130.0 mm. Other dimensions can be available on request.

    Propiedades mecánicas

    Ocultar/mostrar columnas específicas Editar
    Seleccionar columnas para mostrar
      Espesor
      (mm)
      Dureza 1)
      (HBW)
      6.0 - 130.0 360 - 420
      Comparar parámetros

      Seleccione un parámetro para comparar

      Comparativa

        Espesor
        (mm)
        6.0 - 130.0
        Dureza 1)
        (HBW)
        360 - 420

        1) Se mide la dureza, conforme a EN ISO 6506-1, en una superficie fresada de entre 0,5 y 2 mm por debajo de la superficie de la chapa.

        Propiedades de impacto

        Ocultar/mostrar columnas específicas Editar
        Seleccionar columnas para mostrar
          Espesor
          (mm)
          Ensayo transversal, mín. energía de impacto,
          Charpy V probetas 10x10 mm 1)
          6.0 - 130.0 20 J / 20 °C
          Comparar parámetros

          Seleccione un parámetro para comparar

          Comparativa

            Espesor
            (mm)
            6.0 - 130.0
            Ensayo transversal, mín. energía de impacto,
            Charpy V probetas 10x10 mm 1)
            20 J / 20 °C

            1) Ensayo de impacto según EN 10 025, EN ISO 148 con un percutor de 2 mm.

             

             

             

            Ultrasonic testing

            Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.

            Tolerancias

            More details are given in SSAB’s brochure Toolox® Guarantees and on www.toolox.com.

            Espesor

            Tolerances according to Toolox® Thickness Guarantee.

            Toolox® Guarantees meets the requirements of EN 10029 Class C but offers more narrow tolerances.

            Largo y ancho

            Tolerances according to EN 10029.

            Planitud

            Tolerances are according to Toolox® Flatness Guarantees, which are more restrictive than EN 10029 Class N (steel type L).

            Propiedades superficiales

            De conformidad con la norma EN 10163-2, clase B, subclase 3.

            Condiciones de entrega

            Quenched and Tempered at a minimum temperature of 590 °C.

            On delivery from SSAB the plates meet the following specifications:

            • Free from mill scale
            • Not repair welded

            Delivery requirements can be found in SSAB’s brochure Toolox® Guarantees or at www.toolox.com.