Docol® 1200M martensitic

Download data sheet

Select Language

General Product Description

SSAB Docol 1200M is available both as hot rolled and cold rolled. SSAB Docol 1200M martensitic steel helps improve crashworthiness and ensure a lightweight design and cost-efficient production methods for the automotive industry. SSAB Docol is one of the strongest cold rolled advanced high-strength steels on the market and has become the material of choice for automotive applications such as side impact beams, bumpers and structural components.

Dimension Range

Cold rolled / UC: thickness 0.50-2.10 mm, width up to 1527 mm.

Cold rolled / EG: thickness 0.80-1.80 mm, width up to 1200 mm.

Hot rolled / UC: thickness 2.00-5.00 mm, width up to 1440 mm.

Slit strip and cut to length sheets are available upon request.

Grade and coating specific restrictions on available dimensions may occur.

Mechanical Properties

	Standard	Coating	Test direction	Yield strength R_p0.2 (MPa)	Tensile strength R_m (MPa)	Elongation A₈₀ (min %)	Elongation A₅ (min %)	BH₂ (min MPa)	Min. inner bending radius for a 90° bend
Docol CR950Y1200T-MS	SSAB	UC, EG	T	950 -	1200 - 1400	3	—	30	3.5 x t
Docol HR900Y1180T-MS	SSAB	UC	L	900 - 1150	1180 - 1400	5	5	30	—

Docol CR950Y1200T-MS

Standard

SSAB

Coating

UC, EG

Test direction

Yield strength R_p0.2
(MPa)

950 -

Tensile strength R_m
(MPa)

1200 - 1400

Elongation A₈₀
(min %)

Elongation A₅
(min %)

—

BH₂
(min MPa)

Min. inner bending radius for a 90° bend

3.5 x t

Docol HR900Y1180T-MS

Standard

SSAB

Coating

Test direction

Yield strength R_p0.2
(MPa)

900 - 1150

Tensile strength R_m
(MPa)

1180 - 1400

Elongation A₈₀
(min %)

Elongation A₅
(min %)

BH₂
(min MPa)

Min. inner bending radius for a 90° bend

—

The testing of mechanical properties of electrogalvanized products is conducted without coating.

For thicknesses < 3.0 mm, Docol HR900Y1180T-MS can be adapted and certified according to VDA 239-100 upon request.

Chemical Composition (ladle analysis)

	Coating	C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Al (%)	Nb+Ti (max %)	Cr+Mo (max %)	B (max %)	Cu (max %)
Docol CR950Y1200T-MS	UC, EG	0.14	0.40	2.00	0.020	0.010	From 0.015	0.10	—	—	—
Docol HR900Y1180T-MS	UC	0.25	0.80	2.50	0.050	0.010	0.015 - 2.00	0.25	1.20	0.005	0.20

Docol CR950Y1200T-MS

Coating

UC, EG

C
(max %)

0.14

Si
(max %)

0.40

Mn
(max %)

2.00

P
(max %)

0.020

S
(max %)

0.010

Al
(%)

From 0.015

Nb+Ti
(max %)

0.10

Cr+Mo
(max %)

—

B
(max %)

—

Cu
(max %)

—

Docol HR900Y1180T-MS

Coating

C
(max %)

0.25

Si
(max %)

0.80

Mn
(max %)

2.50

P
(max %)

0.050

S
(max %)

0.010

Al
(%)

0.015 - 2.00

Nb+Ti
(max %)

0.25

Cr+Mo
(max %)

1.20

B
(max %)

0.005

Cu
(max %)

0.20

Tolerances

Hot rolled (UC): Tolerances in accordance to EN 10051

Cold rolled (UC, EG): Tolerances in accordance to EN 10131.

Customized dimensional and shape tolerances are available upon request.

The following improved flatness tolerances are available for cold rolled martensitic products upon request. The tolerances are valid for mother coils only before slitting.

Thickness (mmin)	Max height¹⁾ (mm)
0.80 - 0.990.031 - 0.039	8
1.00 - 1.390.0394 - 0.0547	7
1.40 - 1.590.0551 - 0.0626	6
1.60 - 1.790.0630 - 0.0705	5
1.80 - 2.100.0709 - 0.0827	4

Thickness
(mmin)

0.80 - 0.990.031 - 0.039

Max height¹⁾
(mm)

Thickness
(mmin)

1.00 - 1.390.0394 - 0.0547

Max height¹⁾
(mm)

Thickness
(mmin)

1.40 - 1.590.0551 - 0.0626

Max height¹⁾
(mm)

Thickness
(mmin)

1.60 - 1.790.0630 - 0.0705

Max height¹⁾
(mm)

Thickness
(mmin)

1.80 - 2.100.0709 - 0.0827

Max height¹⁾
(mm)

EG coated martensitic grades are supplied with improved flatness tolerances.

¹⁾ Distance from the top surface of the strip normal to flat surface. Measured with a ruler on sheets of mother coil width and minimum length 1200 mm. Cross bow and coil set excluded.

Coatings

The metal coating options for SSAB Docol products include:

Electrogalvanized coating (EG) is applied continuously by electro deposition. The coating consists of zinc (>99%). Electrogalvanized steel is characterized by its excellent surface quality and uniform coating thickness.

Grade specific availability of metal coatings for SSAB Docol products is given in the Mechanical properties table (Coating).

Coating type	Coating class	Standard	Closest in EN standard, informative ¹⁾	Coating mass per side, single spot test (g/m²)	Thickness per side informative (µm)
EG	12/12	VDA 239-100	ZE25/25	12 - 32	1.7 - 4.5
EG	18/18	VDA 239-100	—	18 - 38	2.5 - 5.4
EG	29/29	VDA 239-100	ZE50/50	29 - 49	4.1 - 6.9
EG	47/47	VDA 239-100	ZE75/75	47 - 61	6.6 - 8.6
EG	50/50	VDA 239-100	—	50 - 70	7.0 - 9.9
EG	53/53	VDA 239-100	—	53 - 73	7.5 - 10.3
EG	60/60	VDA 239-100	—	60 - 80	8.5 - 11.3
EG	65/65	VDA 239-100	ZE100/100	65 - 85	9.2 - 12.0
EG	70/70	VDA 239-100	—	70 - 90	9.9 - 12.7

Coating type

Coating class

12/12

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

ZE25/25

Coating mass per side, single spot test (g/m²)

12 - 32

Thickness per side informative (µm)

1.7 - 4.5

Coating type

Coating class

18/18

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

—

Coating mass per side, single spot test (g/m²)

18 - 38

Thickness per side informative (µm)

2.5 - 5.4

Coating type

Coating class

29/29

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

ZE50/50

Coating mass per side, single spot test (g/m²)

29 - 49

Thickness per side informative (µm)

4.1 - 6.9

Coating type

Coating class

47/47

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

ZE75/75

Coating mass per side, single spot test (g/m²)

47 - 61

Thickness per side informative (µm)

6.6 - 8.6

Coating type

Coating class

50/50

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

—

Coating mass per side, single spot test (g/m²)

50 - 70

Thickness per side informative (µm)

7.0 - 9.9

Coating type

Coating class

53/53

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

—

Coating mass per side, single spot test (g/m²)

53 - 73

Thickness per side informative (µm)

7.5 - 10.3

Coating type

Coating class

60/60

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

—

Coating mass per side, single spot test (g/m²)

60 - 80

Thickness per side informative (µm)

8.5 - 11.3

Coating type

Coating class

65/65

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

ZE100/100

Coating mass per side, single spot test (g/m²)

65 - 85

Thickness per side informative (µm)

9.2 - 12.0

Coating type

Coating class

70/70

Standard

VDA 239-100

Closest in EN standard, informative ¹⁾

—

Coating mass per side, single spot test (g/m²)

70 - 90

Thickness per side informative (µm)

9.9 - 12.7

SSAB Docol metal coated products are available with surface quality for unexposed applications.

In addition to these coating masses, OEM specific coatings and single sided EG coatings are available upon request.

¹⁾ For GI and GA the closest informative value refers to EN 10346. For EG to EN 10152.

Surface Treatments

Uncoated (UC): available as oiled.

Electrogalvanized (EG): available as oiled and/or chemically passivated or phosphated.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr⁶⁺). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® Martensitic steel product offer

Contenido relacionado

Existencias de materiales de prueba

¿Desea descubrir aplicaciones únicas de automoción, probar nuevos métodos de producción o crear componentes más ligeros que ahorren combustible y mejoren la resistencia a los impactos y la sostenibilidad?

Datos de conformado para aceros AHSS Docol®

Los clientes existentes de Docol® disfrutan de un acceso 24/7 a los datos de conformado que necesita para ayudarle en su selección y simulación de aceros avanzados de alta resistencia para automoción.

General Product Description

Dimension Range

Mechanical Properties

Chemical Composition (ladle analysis)

Tolerances

Coatings

Surface Treatments

Fabrication and Other Recommendations

Docol® Martensitic steel product offer

Docol® 900M martensitic

Docol® 1100M martensitic