SSAB Laser® DC03

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    SSAB Laser® DC03 is an advanced structural cold forming steel for laser cutting. The SSAB guarantee for flatness, both before and after laser cutting, is ≤ 3 mm/m deviation.

    SSAB Laser® DC03 meets and exceeds the requirements of DC03 in EN 10130. Dual certification is available upon request.

    Dimension Range

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mm)
      Width
      (mm)
      Length
      (mm)
      0.8 - 3.0 730 - 1540 1200 - 8500
      Compare parameters

      Select one parameter to compare

      Comparison

        Mechanical Properties

        Hide/Show specific columns Edit
        Select columns to display
          Delivery form Yield strength Rp0.2
          (MPa)
          Tensile strength Rm
          (MPa)
          Elongation A80 1)
          (min %)
          Cold rolled sheet 140 - 240 270 - 370 34
          Compare parameters

          Select one parameter to compare

          Comparison

            The mechanical properties are tested in the transverse direction.

            1) When the thickness is less than or equal to 0.7 mm, the minimum value for elongation is reduced by 2 units.

            Chemical Composition (ladle analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C
              (max %)
              Si
              (max %)
              Mn
              (max %)
              P
              (max %)
              S
              (max %)
              Al
              (min %)
              Nb+Ti
              (max %)
              0.080 0.040 0.40 0.030 0.030 0.015 0.040
              Compare parameters

              Select one parameter to compare

              Comparison

                Tolerances

                Thickness

                SSAB Laser® DC03 is delivered with thickness tolerances corresponding to 1/2 EN 10131.

                Width

                SSAB Laser® DC03 is delivered with width tolerances in accordance to EN 10131. Tighter tolerances are available upon request.

                Length

                SSAB Laser® DC03 is delivered with length tolerances in accordance to EN 10131. Tighter tolerances are available upon request.

                Flatness

                ≤ 3 mm/m flatness deviation for both delivery condition and laser cut parts.

                Delivery Conditions

                SSAB Laser DC03 is delivered in cold rolled condition as sheets.

                Fabrication and Other Recommendations

                SSAB Laser®DC03 offers ideal laser cutting, cold forming and welding performance.

                For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                Contact Information

                www.ssab.com/contact