Docol® Tube 700LA

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Tällä sivulla

General Product Description

Docol® Tube 700LA is high-strength formable precision tube with pickled hot rolled surface condition. Available in circular shapes. Rectangular, square and customized shapes and other tailoring options are available upon request. Typical uses include automotive and engineering, where durability, formability, lightness and energy absorption are important.

Dimension Range

Docol Tube 700LA is available in circular shapes.

Hide/Show specific columns Edit
Select columns to display
    Shapes Dimensions
    Circular (mmin) 32 - 88.91.3 - 3.50
    Wall thickness (mmin) 2.0 - 3.00.079 - 0.12
    Mill length (mm) 6000
    Compare parameters

    Select one parameter to compare

    Comparison

      Shapes
      Circular (mmin)
      Dimensions
      32 - 88.91.3 - 3.50
      Shapes
      Wall thickness (mmin)
      Dimensions
      2.0 - 3.00.079 - 0.12
      Shapes
      Mill length (mm)
      Dimensions
      6000

      Other shapes, sizes and lengths are available upon request.

      Circular Dimensions

      Hide/Show specific columns Edit
      Select columns to display
        Outer diameter (mmin) 2.0 mm (kg/m) 2.5 mm (kg/m) 3.0 mm (kg/m)
        321.3 1.48
        351.4 1.63 2.00
        381.5 1.78 2.19 2.59
        411.6 1.92 2.37 2.81
        44.51.75 2.10 2.59 3.07
        481.9 2.27 2.81 3.33
        502.0 2.37 2.93 3.48
        552.2 2.61 3.24
        572.2 2.71 3.36
        602.4 2.86 3.55
        76.13.00 3.65
        88.93.50 4.29
        Compare parameters

        Select one parameter to compare

        Comparison

          Mechanical Properties

          Hide/Show specific columns Edit
          Select columns to display
            Yield strength Rp0.2
            (min MPa)
            Tensile strength Rm
            (min MPa)
            Elongation A
            (min %)
            HR700LA 700 740 5
            Compare parameters

            Select one parameter to compare

            Comparison

              Mechanical properties meet the requirements of EN 10305 (+CR2).

              Chemical Composition (ladle analysis)

              Hide/Show specific columns Edit
              Select columns to display
                C
                (max %)
                Si
                (max %)
                Mn
                (max %)
                P
                (max %)
                S
                (max %)
                Altot 1)
                (min %)
                HR700LA 0.16 0.60 2.10 0.025 0.025 0.020
                Compare parameters

                Select one parameter to compare

                Comparison

                  Chemical composition meets the requirements of EN 10305.

                  If other chemical elements such as Ti, Nb or V are used, the content of these elements are reported in the inspection document.

                  1) This requirement is not applicable provided the steel contains a sufficient amount of other nitrogen binding elements, such as Ti, Nb or V.

                  Tolerances

                  Tolerance Circular

                  Hide/Show specific columns Edit
                  Select columns to display
                    Characteristic Circular precision tubes
                    Tolerances meet or exceed the requirements of EN 10305-3
                    Outside diameter (D) (1
                    D < 20 mm
                    20 ≤ D < 32 mm
                    32 ≤ D < 44 mm
                    44 ≤ D < 55 mm
                    55 ≤ D < 70 mm
                    70 ≤ D < 80 mm
                    80 ≤ D < 100 mm

                    ±0.12 mm
                    ±0.15 mm
                    ±0.20 mm
                    ±0.25 mm
                    ±0.30 mm
                    ±0.35 mm
                    ±0.40 mm
                    Out-of-roundness The diameter tolerances include the out-of-roundness
                    Thickness (T) T ≤ 1.5 mm: ±0.15 mm
                    T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
                    Straightness Maximum 0.15% of measured length
                    Height of internal weld bead, g;
                    Bead removed
                    Bead not removed

                    g ≤ 0.3 mm
                    g < 0.8 mm, when T ≤ 1.5 mm
                    g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm
                    Mill length 0/+50 mm, standard length 6000 mm
                    Exact length, single cutting Agreed at the time of enquiry and order
                    Exact length, bundle cutting Agreed at the time of enquiry and order
                    Compare parameters

                    Select one parameter to compare

                    Comparison

                      Characteristic
                      Outside diameter (D) (1
                      D < 20 mm
                      20 ≤ D < 32 mm
                      32 ≤ D < 44 mm
                      44 ≤ D < 55 mm
                      55 ≤ D < 70 mm
                      70 ≤ D < 80 mm
                      80 ≤ D < 100 mm
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3

                      ±0.12 mm
                      ±0.15 mm
                      ±0.20 mm
                      ±0.25 mm
                      ±0.30 mm
                      ±0.35 mm
                      ±0.40 mm
                      Characteristic
                      Out-of-roundness
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      The diameter tolerances include the out-of-roundness
                      Characteristic
                      Thickness (T)
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      T ≤ 1.5 mm: ±0.15 mm
                      T>1.5 mm: ±10% of nominal thickness or ±0.35 mm whichever is the smaller
                      Characteristic
                      Straightness
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      Maximum 0.15% of measured length
                      Characteristic
                      Height of internal weld bead, g;
                      Bead removed
                      Bead not removed
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3

                      g ≤ 0.3 mm
                      g < 0.8 mm, when T ≤ 1.5 mm
                      g < 0.6 x T, when 1.5 mm < T ≤ 3.0 mm
                      Characteristic
                      Mill length
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      0/+50 mm, standard length 6000 mm
                      Characteristic
                      Exact length, single cutting
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      Agreed at the time of enquiry and order
                      Characteristic
                      Exact length, bundle cutting
                      Circular precision tubes
                      Tolerances meet or exceed the requirements of EN 10305-3
                      Agreed at the time of enquiry and order

                      1)For a maximum distance of 100 mm, the ends may, due to the cutting method, have diameters outside the tolerances.

                      Coating and Surfaces

                      Surface designation and general usability

                      Hide/Show specific columns Edit
                      Select columns to display
                        Designation Definition
                        UC Uncoated (Hot rolled and pickled, HR, S2)
                        Compare parameters

                        Select one parameter to compare

                        Comparison

                          Designation
                          UC
                          Definition
                          Uncoated (Hot rolled and pickled, HR, S2)

                          Surface is slightly oiled to protect it from corrosion during transportation and short-term storage. By request, tubes can be delivered dry, however in that case SSAB will not be responsible for any possible rust.

                          Surface roughness, Ra

                          Hide/Show specific columns Edit
                          Select columns to display
                            Designation Ra value
                            UC, HR < 2.0 µm
                            Compare parameters

                            Select one parameter to compare

                            Comparison

                              Designation
                              UC, HR
                              Ra value
                              < 2.0 µm

                              Delivery Conditions

                              The tubes are not intended to undergo any heat treatment after welding and sizing as that may alter the mechanical properties of the material.

                              The tubes are oiled with anti-corrosive oil.

                              Fabrication and Other Recommendations

                              For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                              Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                              Other precision tube products

                              Docol® Tube 780DP

                              Docol® Tube 980DP

                              Docol® Tube R8

                              SSAB Boron Tube 22

                              SSAB Form Tube 420

                              SSAB Form Tube 320