Strenx® 1100 CR
Download data sheet
Strenx® 1100 CR is a cold-rolled high-strength structural steel with a minimum yield strength of 1100 MPa used to produce stronger and lighter load-bearing components and parts. Strenx® 1100 CR comes with the Strenx® guarantees for flatness, thickness and bending properties, ensuring predictable performance in the workshop. The steel is available as thin sheets or coils with thicknesses between 0.8 and 2.1 mm, width up to 1500 mm and length up to 8500 mm.
|Yield strength Rp0.2
|Tensile strength Rm
|Min. inner bending radius for a 90° bend 1)
|1100160||1300 - 1500189 - 218||3||3.5|
1) For both longitudinal and transverse direction.
The mechanical properties are guaranteed in coil condition.
The mechanical properties are tested in the longitudinal direction.
|Thickness (mmin)||0.8 - 2.10.028 - 0.083|
|Typ CET(CEV)||0.30 (0.41)|
Tolerances according to Strenx® Thickness Guarantees.
Strenx® Thickness guarantees meet the normal thickness tolerance requirements of EN 10131.
Tolerances according to EN 10131. Narrower tolerances according to the SSAB standard are available on request.
Length tolerances only apply for cut to length sheets.
Tolerances according to Strenx® Flatness Guarantees Class B.
Strenx® Flatness Guarantees offer narrower tolerances compared to EN 10131.
Flatness guarantees only apply for cut to length sheets.
Cold rolled. Strenx® CR is available with mill or cut edge.
Strenx® CR has good cold forming, welding and cutting performance.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.