Product & services Brands & products Duroxite Product offer and datasheets Pipe Duroxite 200 Pipe

Duroxite® 200 Pipe

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data
On this page

    General Product Description

    Duroxite® 200 Pipe is manufactured by depositing specially formulated abrasive materials on a mild steel base using a traditional arc welding process. The overlay material is composed of primary chromium-rich carbides and refined multiple-alloy complex carbides dispersed evenly in a ductile eutectic austenite matrix. The hardfacing overlay pipe is designed with extreme wear resistance for working in a severe sliding wear environment. Duroxite® 200 Pipe is available with single or double overlay passes. Schedule 40 and Schedule 80 steel pipe as well as tubing can be used as base pipes to make Duroxite® 200 Pipe. Duroxite® 200 Pipe can be fabricated as square-to-round transitions, elbows, T or Y-shaped, or as long sweeps.

    Key Benefits

    • Same wear resistance guaranteed from surface down to 75% of the overlay
    • Optimal carbide composition to provide good combination of wear resistance and homogenous bonding
    • Longer service life and better wear resistance compared to traditional chromium carbide hardfacing pipe

    Typical Applications

    Duroxite® 200 Pipe is widely used in the mining, cement, oil sands, dredging, recycling and steel production industries. Some specific applications include:

    Hide/Show specific columns Edit
    Select columns to display
      Mining Slurry pumps, chutes
      Cement Chutes, slurry pumps
      Dredging Dredging pipes
      Steel Air ducts, carbon injection pipes, suction lines, troughs
      Compare parameters

      Select one parameter to compare

      Comparison

        Mining
        Slurry pumps, chutes
        Cement
        Chutes, slurry pumps
        Dredging
        Dredging pipes
        Steel
        Air ducts, carbon injection pipes, suction lines, troughs

        For more information on applications see the Duroxite® Product brochure.

        Standard Dimensions

        Hide/Show specific columns Edit
        Select columns to display
          Diameter
          Length
          Metric unit Metric unit Other Custom Specifications
          50 - 150 mm
          200 - 600 mm
          600 - 900 mm                     		0.9 - 1.0 m
          0.9 - 3.0 m
          1.8 - 3.0 m                     		- All available gauges > Schedule 40 steel pipe
          - Lengths cut or fabricated as needed
          - Stainless steel and other pipe grades available
          - Custom diameters, lengths and gauge sizes are available upon request.
          - Diameters larger than 0.9 m can be fabricated from formed Duroxite® 100 plate.
          Compare parameters

          Select one parameter to compare

          Comparison

            Mechanical Properties

            Hide/Show specific columns Edit
            Select columns to display
              Wear properties
              ASTM G65 – Procedure A weight loss 2)
              Number of overlay passes Typical surface hardness1)

              (HRC)              		 Typical surface hardness1)

              (HV)              		 Surface
              (g max)              		 75 % depth of overlay 3)
              (g max)
              Single pass 57 - 60 630 - 700 0.19 0.19
              Double passes 60 - 65 700 - 850 0.12 0.12
              Compare parameters

              Select one parameter to compare

              Comparison

                1) Surface hardness is measured on machined flat surface just below overlay surface.

                2) ASTM G65 - Procedure A weight loss, is a standard test measuring sliding abrasion resistance using a dry sand/rubber wheel apparatus. ASTM G65-Procedure A is the most severe test method.

                3) ASTM G65 - Procedure A weight loss, wear test is conducted at 75% depth of the overlay materials to ensure consistently good wear resistance from the top surface through to the depth of 75% of the overlay.

                Microstructure

                The microstructure of Duroxite® 200 pipes contains primary chromium-rich carbides and refined multiple-alloy complex carbides with a typical hardness of 2500 to 3000 HK4) dispersed evenly in a ductile eutectic austenite matrix. The typical volume fraction of primary chromium-rich carbides is maintained between 30 to 40% with 7 to 10% of multi-alloy complex carbides.

                4) HK is the Knoop microhardness used primarily for very brittle materials.

                Fabrication and Other Recommendations

                Welding, cutting, forming and machining

                Workshop recommendations can be found in the Duroxite® overlay brochure or you can consult your local technical support representative for more information.

                Safety precautions

                When welding or cutting Duroxite® products, gases and harmful fumes are produced that are chemically complex and difficult to classify. The major toxic component in the fumes is hexavalent chromium. The proper exhaust ventilation equipment and fume-extraction torches are recommended, as well as suitable protective clothing and respiratory protection for operators.