GreenCoat TSP Pural BT
Download data sheet
GreenCoat TSP Pural BT color coated steel is available in regular and matt finishes and offers a wide range of colors inspired by Nordic nature. It uses a patented bio-based coating having Swedish rapeseed oil instead of traditional fossil oil in the paint, which is unique on the market. SSAB holds a worldwide patent for this coating technology (Bio-based Technology, BT).
This product has been developed together with tinsmiths in order to obtain optimum product properties combined with Nordic quality steel and an excellent coating. The result is a unique, premium product for tinsmiths.
GreenCoat TSP Pural BT offers the highest level of durability for standing-seam systems and can be used in all premium tinsmith applications. The formable TSP (TinSmith Pro) steel has practically no spring back, which allows for very tight folding.
GreenCoat TSP Pural BT color coated steel offers a coating that is optimized to resist weathering, resulting in excellent UV resistance (Ruv5 for matt appearance) and corrosion classes (RC5+). The slightly structured surface helps to protect against mechanical wear and is easy to handle during manufacturing. GreenCoat TSP Pural BT is highly formable and workable at temperatures down to – 15°C, allowing for year round installation at lower costs.
The reverse side of the sheet is painted with a two-layer grey backside coating.
GreenCoat TSP Pural BT complies with current REACH regulations and is fully chromate free.
SSAB’s color coated steels are all manufactured according to EN 10169.
|Minimum inner bending radius||1 x sheet thickness||1 x sheet thickness|
|Scratch resistance||40 N||40 N|
|Lowest forming temperature||-15 °C||-15 °C|
|UV radiation resistance||RUV5||RUV4|
|Corrosion resistance 1)||RC5+||RC5+|
|Stain resistance||Very good||Very good|
|Highest operating temperature||100 °C||100 °C|
|Fire classification, EN 13501-1||A1 s1 d0||A1 s1 d0|
|Coating thickness, nominal (primer + top coat)||50 µm||50 µm|
|Steel designation||TSP 2)||TSP 2)|
|Yield strength Rp0.2 Typical||190 MPa||190 MPa|
|Tensile strength Rm Typical||330 MPa||330 MPa|
|Elongation A80 Typical||40 %||40 %|
|Zinc coating||275 g/m2||275 g/m2|
|Min steel thickness 3)||0.60 mm||0.60 mm|
|Steel width 3)||1000 - 1500 mm||1000 - 1500 mm|
1) Classification into corrosion resistance categories is based on blistering, delamination and damage on bend of the coating after four years exposure in natural outdoor testing sites as specified in EN 10169.
2) TSP fulfills the requirements of EN 10346 DX53D.
3) Maximum steel thickness is 1.5 mm and maximum steel width depends on steel thickness. For other steel dimensions or steel grades please contact SSAB Tech Support.
Below are the colors currently available. Other colors can be agreed upon separately.
Colors shown in the color table are only indicative. To see the real visual appearance of the product, please order a color sample. Please note also that the same colors between the products may differ.
For information on thermal properties (solar reflectance index SRI or thermal emittance TE) of available colors, please contact SSAB Tech Support.
GreenCoat TSP Pural BT
RR20 / SS0005
RR19 / SS0001
RR292 / SS----
RR21 / SS0011
RR287 / SS0244
RR22 / SS0554
RR237 / SS0061
RR2H8 / SS0087
RR23 / SS0036
RR2F7 / SS0035
RR2H3 / SS0534
Nordic Night Black
RR33 / SS0015
RR32 / SS0387
RR887 / SS0435
RR8H2 / SS0426
RR30 / SS0187
RR29 / SS0758
RR750 / SS0760
RR7F2 / SS0742
RR24 / SS0189
Silver Fir Green
RR5J3 / SS0975
RR594 / SS0874
RR11 / SS0830
RR37 / SS0925
RR35 / SS0558
RR40 / SS0045
Metallic Dark Silver
RR41 / SS0044
RR42 / SS----
RR979 / SS0778
Note especially for Metallic and all Matt colors: To ensure tonal consistency of colors on a single exterior face, all material must come from the same production batch. Also the directionality of surfaces has to be consistent especially when sheets are cut to size. Compared to solid colors, larger measured color variation between production batches is typical for metallic colors, even if color is visually stable.
Unless otherwise specified, the reverse side of the sheet is painted with a two-layer coating to further improve the corrosion resistance of the end product. The coating provides good adhesion properties to many adhesives and foams; nevertheless the compatibility needs to be tested case-specifically.
|Nominal Coating Thickness (primer + top coat)||12 µm|
|Corrosion Resistance||Min CPI3|
For easy material identification the reverse side of the sheet is stamped with the GreenCoat logo and the product name. The production year is marked to ease material traceability and can be referred to within the guarantee period. An arrow shows the direction of production to ensure installation in a uniform direction.