Docol® 650LA high strength low alloy
General Product Description
The Docol 650LA is a high-strength low-alloy steel that offer consistent properties for modern, rapid production methods. Typical applications include components and parts such as load-bearing structures, for example chassis. Docol HR650LA-UC can after agreement be adapted and delivered as dual certified with S650MC according to EN 10149-2.
Dimension Range
Hot rolled / UC: thickness 2.00-6.00 mm, width up to 1600 mm.
Slit strip and cut to length sheets are available upon request.
Grade and coating specific restrictions on available dimensions may occur.
Mechanical Properties
Docol HR650LA
(MPa)
(MPa)
(min %)
(min %)
1) A80 value applies for thicknesses < 3.00 mm.
2) A5 value applies for thicknesses ≥ 3.00 mm.
Chemical Composition (ladle analysis)
Docol HR650LA
(max %)
(max %)
(max %)
(max %)
(max %)
(%)
(max %)
(max %)
(max %)
Tolerances
Hot rolled (UC): Tolerances in accordance to EN 10051.
Customized dimensional and shape tolerances are available upon request.
Surface Treatments
Uncoated (UC): available as oiled.
All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.
Fabrication and Other Recommendations
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.
Docol® High Strength Low Alloy steel product offer
Docol® 420LA high strength low alloy
Afficher le produitDocol HR100XF
Afficher le produitDocol HR110XF
Afficher le produitDocol® S600MC high strength low alloy
Afficher le produitDocol® S650MC high strength low alloy
Afficher le produitDocol® S700MC high strength low alloy
Afficher le produitDocol® S900MC high strength low alloy
Afficher le produitDocol S960MC
Afficher le produitDocol® 460LA high strength low alloy
Afficher le produitDocol® 500LA high strength low alloy
Afficher le produitDocol® 550LA high strength low alloy
Afficher le produitDocol® 600LA high strength low alloy
Afficher le produitDocol® 650LA high strength low alloy
Afficher le produitDocol® 700LA high strength low alloy
Afficher le produitAutres sujets dans la même veine
Stock de matières d'essai
Vous voulez découvrir des applications automobiles uniques, essayer de nouvelles méthodes de production, ou créer des pièces plus légères pour améliorer l'efficacité énergétique, la résistance aux chocs et la durabilité ?
Read more
Informations sur le formage des aciers Docol® AHSS
Les clients Docol® peuvent profiter d'un accès 24h sur 24, 7 jours sur 7, à toutes les informations sur le formage, qui peuvent servir à des simulations intégrant des aciers automobiles avancés à haute limite élastique.
Read more