SSAB Domex® 240YP
Download data sheet
SSAB Domex 240YP meets or exceeds the requirements of S235JRC, S235J0C or S235J2C in EN 10025-2, depending on agreed impact strength requirements at the time of order. Upon agreement, it can be delivered double certified and CE marked.
SSAB Domex 240YP is available in thicknesses of 1.80-20.00 mm and widths up to 1860mm depending on thickness as coils, slit coils and as cut to length in lengths up to 16 meters.
|Yield strength ReH
|Tensile strength Rm
|Elongation A80 1)
|Elongation A5 2)
|Min. inner bending radius for a 90° bend
The mechanical properties are tested in the transversal direction.
Bending properties for both longitudinal and transversal direction.
1) A80 value applies for thicknesses < 3.00 mm.
2) A5 value applies for thicknesses ≥ 3.00 mm.
|Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
The steel is grain refined.
1) Mn max 1.1% for thicknesses above 16mm.
|Thickness (mm)||1.80 - 20.00|
SSAB Domex is delivered with SSAB Domex tolerances, with improved guarantees compared to EN 10051. More details are available at SSAB.com
SSAB Domex thickness tolerances correspond to 2/3 of EN 10051 as default value. After special agreement, tolerances down to 1/3 of EN 10051 can be delivered for certain products and dimensions.
SSAB Domex tolerances for width and length are according to SSAB standard and offer narrower width and length tolerances compared to EN 10051.
For coil and sheet with mill edge, the width tolerances are corresponding to -0/+20 mm.
For coil and sheet with cut edge, the width tolerances are corresponding to -0/+2 mm.
After special agreement, tighter tolerances can be delivered for certain products and dimensions. Length tolerances only apply for cut to length sheets.
SSAB Domex is delivered with shape tolerances according to EN 10051. Tighter tolerances are available on request.
SSAB Domex tolerances guarantee a maximum flatness deviation of 3 mm/m in addition to the EN 10051 flatness requirements.
Flatness guarantees only apply for cut to length sheets.
According to EN 10163-2 Class A, Subclass 3.
SSAB Domex 240YP is available with non-pickled or pickled surface with mill or cut edge.
SSAB Domex 240YP is a cold forming steel not suited for heat treatments at temperatures above 580°C, since the material may then lose its guaranteed properties.
SSAB Domex 240YP has good laser cutting, cold forming and welding performance.
SSAB Domex 240YP is suitable for hot dip galvanizing.
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.