Docol® PHS 1500 press hardening

More about press hardening steel

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page

General Product Description

Hardenable boron steel for the automotive industry. Available as both hot rolled and cold rolled. Docol PHS 1500 steels are specially developed for parts and components that are manufactured by direct or indirect hot stamping. Applications include safety parts such as door impact beams, bumper systems and B- pillar reinforcements.

Dimension Range

Cold rolled / UC: thickness 0.70-3.00 mm, width up to 1500 mm.

Hot rolled / UC: thickness 2.00-12.00 mm, width up to 1600 mm.

Slit strip and cut to length sheets are available upon request.

Mechanical Properties

Hide/Show specific columns Edit
Select columns to display
    Standard Condition Test direction
    Typical yield strength Rp0.2 (MPa) Typical tensile strength Rm (MPa) Typical elongation A80
    (%)
    Typical elongation A5
    (%)
    Docol PHS FH 1500 SSAB Full Hard T 960 1060 4
    Docol PHS CR 1500 Annealed SSAB As delivered Annealed T 340 480 28
    SSAB Hot stamped 1) T 1200 1590 6
    Docol PHS HR 1500 SSAB Hot rolled T 570 2) 715 20 22
    SSAB Hot stamped 1) T 1200 2) 1590 6 7
    Docol PHS HR 1500+A SSAB Annealed T 350 2) 530 25 33
    Compare parameters

    Select one parameter to compare

    Comparison

      1) Properties depend on the process.

      2) ReH is used instead of Rp0.2.

      Chemical Composition (ladle analysis)

      Hide/Show specific columns Edit
      Select columns to display
        C
        (%)
        Si
        (%)
        Mn
        (%)
        P
        (max %)
        S
        (max %)
        Cr
        (max %)
        B
        (%)
        0.20 - 0.25 0.15 - 0.35 1.00 - 1.35 0.025 0.005 0.35 0.0020 - 0.0050
        Compare parameters

        Select one parameter to compare

        Comparison

          Tolerances

          Cold rolled (UC): Tolerances in accordance to EN 10131.

          Hot rolled (UC): Tolerances in accordance to EN 10051.

          Customized dimensional and shape tolerances are available upon request.

          Surface treatments

          Uncoated (UC): available as oiled.

          All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

          Fabrication and Other Recommendations

          For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

          Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

          Docol® PHS steel product offer

          Docol® PHS 1500 press hardening

          Docol® PHS 1800 press hardening

          Docol® PHS 2000 press hardening

          Related content