SSAB Domex® 240YP

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

    General Product Description

    SSAB Domex 240YP meets or exceeds the requirements of S235JRC, S235J0C or S235J2C in EN 10025-2, depending on agreed impact strength requirements at the time of order. Upon agreement, it can be delivered double certified and CE marked.

    Dimension Range

    SSAB Domex 240YP is available in thicknesses of 1.80-20.00 mm and widths up to 1860mm depending on thickness as coils, slit coils and as cut to length in lengths up to 16 meters.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)
      Yield strength ReH
      (min MPa)
      Tensile strength Rm
      (MPa)
      Elongation A80 1)
      (min %)
      Elongation A5 2)
      (min %)
      Min. inner bending radius for a 90° bend
      (x t)
      1.80 - 3.000.0709 - 0.118 240 360 - 460 19 28 0.2
      3.01 - 6.000.119 - 0.236 240 360 - 460 28 0.3
      6.01 - 20.000.237 - 0.7874 240 360 - 460 28 0.4
      Compare parameters

      Select one parameter to compare

      Comparison

        The mechanical properties are tested in the transversal direction.

        Bending properties for both longitudinal and transversal direction.

        1) A80 value applies for thicknesses < 3.00 mm.

        2) A5 value applies for thicknesses ≥ 3.00 mm.

        Impact Properties

        Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

        Chemical Composition (ladle analysis)

        Hide/Show specific columns Edit
        Select columns to display
          C
          (max %)
          Si
          (max %)
          Mn 1)
          (max %)
          P
          (max %)
          S
          (max %)
          0.12 0.03 0.80 0.025 0.025
          Compare parameters

          Select one parameter to compare

          Comparison

            The steel is grain refined.

            1) Mn max 1.1% for thicknesses above 16mm.

            Carbon Equivalent

            Hide/Show specific columns Edit
            Select columns to display
              Thickness (mmin) 1.80 - 20.000.0709 - 0.7874
              Typical CEV (%) 0.16
              Typical CET (%) 0.12
              Compare parameters

              Select one parameter to compare

              Comparison

                Thickness (mmin)
                Typical CEV (%)
                1.80 - 20.000.0709 - 0.7874
                0.16
                Thickness (mmin)
                Typical CET (%)
                1.80 - 20.000.0709 - 0.7874
                0.12
                CET and CEV formula

                Tolerances

                SSAB Domex is delivered with SSAB Domex tolerances, with improved guarantees compared to EN 10051. More details are available at SSAB.com

                Thickness

                SSAB Domex thickness tolerances correspond to 2/3 of EN 10051 as default value. After special agreement, tolerances down to 1/3 of EN 10051 can be delivered for certain products and dimensions.

                Length and Width

                SSAB Domex tolerances for width and length are according to SSAB standard and offer narrower width and length tolerances compared to EN 10051.

                For coil and sheet with mill edge, the width tolerances are corresponding to -0/+20 mm.

                For coil and sheet with cut edge, the width tolerances are corresponding to -0/+2 mm.

                After special agreement, tighter tolerances can be delivered for certain products and dimensions. Length tolerances only apply for cut to length sheets.

                Shape

                SSAB Domex is delivered with shape tolerances according to EN 10051. Tighter tolerances are available on request.

                Flatness

                SSAB Domex tolerances guarantee a maximum flatness deviation of 3 mm/m in addition to the EN 10051 flatness requirements.

                Flatness guarantees only apply for cut to length sheets.

                Surface Properties

                According to EN 10163-2 Class A, Subclass 3.

                Delivery Conditions

                Thermomechanically rolled.

                Surface and edge condition

                SSAB Domex 240YP is available with non-pickled or pickled surface with mill or cut edge.

                Fabrication and Other Recommendations

                SSAB Domex 240YP is a cold forming steel not suited for heat treatments at temperatures above 580°C, since the material may then lose its guaranteed properties.

                SSAB Domex 240YP has good laser cutting, cold forming and welding performance.

                SSAB Domex 240YP is suitable for hot dip galvanizing.

                For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

                Contact Information

                www.ssab.com/contact